Top Fencing Companies in Celina, TN, 38551 | Compare & Call

There are 14 fencing companies server in Celina TN

Clarksville Land Managment

Clarksville Land Managment

Southside TN 37171
Excavation Services, Demolition Services, Fences & Gates

Clarksville Land Management LLC is a locally owned and operated company serving Southside, TN, and the greater Clarksville area. As middle Tennessee locals, we specialize in providing reliable land so...

Exteriors And More

Exteriors And More

Clarksville TN 37040
Fences & Gates, Siding

Exteriors And More has been serving Clarksville, Tennessee since 2004, specializing in siding installation, repair, and replacement as well as fences and gates. The company’s name reflects its philoso...

T&D Fencing and Repair

T&D Fencing and Repair

Dickson TN 37055
Fences & Gates

T&D Fencing and Repair is a family-owned business serving Dickson, TN, founded by Ted Davenport, a lifelong resident and father of three. We specialize in fence and gate installation, repair, painting...

MGS Construction

MGS Construction

Erin TN 37061
Fences & Gates, Decks & Railing, Tree Services

MGS Construction is a trusted local contractor serving Erin, TN, and the surrounding Houston County area. Specializing in fences, gates, decks, and tree services, the company addresses common issues f...

« Previous PagePage 2 of 2Next »


Estimated Fencing Costs in Celina, TN

Emergency Fence/Gate RepairStorm / Security Response
$289 - $389
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $54
Chain Link Installation (Per LF)Estimated Range
$14 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $64
Standard Driveway Gate InstallEstimated Range
$1,034 - $1,384

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Celina. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Questions and Answers

How do modern pool fences and smart gates meet Tennessee safety codes?

All pool barriers must comply with IRC Appendix AG or the ICC ISPSC. This mandates self-closing, self-latching gates with specific latch heights. The low-to-moderate smart gate trend integrates IoT latches that log access and send tamper alerts. This electronic record can demonstrate proactive safety management, which is valuable for liability protection in Tennessee.

Is a standard fence strong enough for Celina's wind loads?

No. Celina's V-ult wind speed rating is 105 mph, per ASCE 7-22 standards. A basic fence will fail. Engineering for this load dictates closer post spacing (often 6-foot centers instead of 8), deeper concrete footings, and commercial-grade wind brackets. This design resists the uplift and lateral forces of our peak storm season gusts.

What are the legal steps for replacing a fence on my property line in Celina?

Under Tennessee Code 66-2-201, the 'Good Neighbor Law,' you must provide written notice to any adjoining property owner before altering a shared boundary fence. In 2026, this is a strict requirement. Failure to notify can result in liability for the full replacement cost and legal action. Always document this notice before any work begins.

How soon can a consultation be scheduled, and what is your response route?

We dispatch from the Clay County Courthouse area. The route via TN-53 allows for a consistent 15 to 25-minute response time to most properties in the Celina area for an initial site assessment and quote. Scheduling depends on current project load but is typically within the same week.

Why do fence posts in Downtown Celina fail, and what's the correct footing depth?

Posts fail from frost heave. The Celina frost line depth is 12 inches. IRC Section R403.1.4 requires footings to extend below this line. Posts set in shallow concrete will lift during freeze-thaw cycles, destroying alignment. For permanent stability, your post footings must be a minimum of 24 inches deep in our soil.

How does Celina's environment affect my choice of fence materials and fasteners?

Moderate-to-heavy termite risk and moderate soil corrosivity dictate material compatibility. Pressure-treated pine and cedar are standard, but steel posts with polymer sleeves prevent ground contact corrosion. Use only hot-dip galvanized or stainless-steel fasteners. Inferior hardware will rust, causing unsightly streaks on the fence and premature failure.

What are the height and setback rules for fences in Celina, TN?

Celina zoning limits are 3 feet in front yards and 6 feet in rear yards, with a 0-foot setback (on the line). For corner lots, especially near TN-53, you must maintain a clear 'sight triangle' at intersections. This is a critical safety zone where no fence or planting over 3 feet high is permitted to ensure driver visibility.

What is required before digging fence post holes in Downtown Celina?

You must contact Tennessee 811 at least three business days before excavation. They will mark all public utility lines. Hitting a gas, water, or fiber line in a dense neighborhood like Downtown Celina is a major liability event with fines and repair costs. A professional manages this call and pulls any required permits from the Clay County permit office to ensure compliance.



Scroll to Top
CALL US NOW