Top Fencing Companies in Crossville, TN, 38555 | Compare & Call

There are 148 fencing companies server in Crossville TN

Rodriguez Landscaping

Rodriguez Landscaping

Memphis TN 38108
Landscaping, Tree Services, Fences & Gates

Rodriguez Landscaping, based in Memphis, TN, specializes in landscaping, tree services, and fence and gate solutions. Many Memphis homes face fencing issues due to weather, soil movement, or tree root...

Mtz Remolding

Mtz Remolding

Memphis TN 38107
Carpenters, Fences & Gates, General Contractors

Mtz Remolding has been serving Memphis, TN, homeowners with expert carpentry and fencing solutions for years. Whether you live near the historic Beale Street or in the quiet neighborhoods around Overt...

Story Works

Story Works

Memphis TN 38104
Landscaping, Decks & Railing, Fences & Gates

Story Works is a Memphis-based landscaping, deck, and fence company serving homeowners in neighborhoods like Midtown, East Memphis, and areas near Overton Park. Many local homes face fence and gate is...

Raindrop Irrigation

Raindrop Irrigation

Memphis TN 38114
Irrigation, Landscaping, Fences & Gates

Raindrop Irrigation in Memphis, TN, began in 1993 as an irrigation company and has since grown into a full-service provider for residential landscaping, hardscaping, and outdoor structures. We handle ...

Air Budget Fence

Air Budget Fence

Memphis TN 38118
Fences & Gates

Air Budget Fence provides expert fence and gate services to homeowners and businesses across Memphis, TN. We understand the unique challenges of our local climate, including high humidity and frequent...

Rowe lawncare

Rowe lawncare

★☆☆☆☆ 1.0 / 5 (1)
Memphis TN 38106
Lawn Services, Fences & Gates, Masonry/Concrete

Rowe Lawncare in Memphis, TN, provides comprehensive lawn services, fencing, gates, and masonry/concrete solutions. Located near the historic Overton Square and the University of Memphis, we understan...

DPL Deck Builders

DPL Deck Builders

Collierville TN 38017
Decks & Railing, Fences & Gates, Patio Coverings

DPL Deck Builders has been serving Collierville, TN, and the surrounding area with reliable deck and fence services for years. We specialize in residential and commercial deck construction, deck repai...

Pro Exteriors Pressure Washing

Pro Exteriors Pressure Washing

Bartlett TN 38134
Pressure Washers, Fences & Gates, General Contractors

Pro Exteriors Pressure Washing, established in 2009, is a fully licensed and insured exterior cleaning and general contracting company serving Bartlett, TN, and the Mid-South. Specializing in soft was...

Trinity Fence Contractor

Trinity Fence Contractor

Bartlett TN 38135
Fences & Gates

Trinity Fence Contracting is a locally owned, family-operated business based in Bartlett, TN, serving the community with over 30 years of experience in residential and commercial fencing. As a Christi...

Sharks Lawn Services

Sharks Lawn Services

Oakland TN 38060
Lawn Services, Fences & Gates

Sharks Lawn Services in Oakland, TN, provides reliable lawn care and fencing solutions to homeowners and businesses. Located near the Oakland Town Square and just off Highway 194, we understand the un...



Estimated Fencing Costs in Crossville, TN

Emergency Fence/Gate RepairStorm / Security Response
$289 - $389
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $54
Chain Link Installation (Per LF)Estimated Range
$14 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $64
Standard Driveway Gate InstallEstimated Range
$1,034 - $1,384

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Crossville. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Question Answers

What are the height and setback rules for fences in Crossville?

Crossville zoning limits fence heights to 4 feet in front yards and 8 feet in rear yards. The setback regulation is 0 feet, allowing construction directly on the property line. For corner lots, especially near US-127, a clear 'sight triangle' must be maintained for traffic visibility; no solid fencing is permitted in this zone.

Why must fence posts be set so deep in Crossville?

The frost line depth in Crossville is 12 inches. Posts set above this line will heave during freeze-thaw cycles, compromising structural stability. Per IRC standards, posts in Downtown Crossville must be set a minimum of 12 inches below grade and in concrete to prevent failure from frost heave.

What is required before digging post holes?

You must contact Tennessee 811 for a utility locate at least three full business days before excavation. Hitting a gas, water, or fiber line in Downtown Crossville creates major liability and service disruption. A professional crew manages this call and coordinates any necessary permit paperwork with the city office.

Can a smart gate meet pool safety requirements?

Yes. Modern smart gates with integrated IoT latches and self-closing/self-latching mechanisms can be engineered to meet the strict standards of IRC Appendix AG and Tennessee Building Code amendments. This integration addresses both the moderate smart-gate trend and liability standards for Tennessee homeowners with pools.

Am I required to notify my neighbor before installing a fence on the property line?

Yes. Tennessee Code 66-2-201, the 'Good Neighbor Fence Act,' requires written notice to adjoining landowners before constructing or replacing a shared partition fence on the line. As of 2026, this legal requirement is a critical first step for any boundary project in Crossville.

How soon can a consultation be scheduled?

A project consultation can typically be scheduled within 48 hours. For a site in Downtown Crossville, the route from the Cumberland County Courthouse via US-127 allows for a consistent 15-20 minute travel time, ensuring prompt and reliable scheduling for initial assessments.

How do soil and pests affect material choice?

Crossville has a moderate soil corrosivity index and a moderate to heavy termite risk level. Material compatibility is critical. Use pressure-treated wood rated for ground contact or non-wood alternatives. Fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks and failure in this environment.

How is a fence engineered for high winds?

Crossville's design wind load rating is 105 MPH V-ult. This ultimate wind speed dictates structural design. Post spacing must be reduced, concrete footings enlarged, and brackets rated for high wind loads to ensure the fence can survive peak storm season gusts without panel failure or overturning.



Scroll to Top
CALL US NOW