Top Fencing Companies in Kenton, TN, 38233 | Compare & Call
There are 85 fencing companies server in Kenton TN
Ergeon serves Nashville homeowners with fence and gate installation, bringing over 20,000 projects of experience to local properties. Founded by two CS PhD entrepreneurs, our mission is to make home i...
Nichols Outdoor Works is a Nashville-based company offering fence and gate installation, repair, painting, weatherproofing, and automatic gate services, plus trailer repair and electrical inspections....
FS Welding is a trusted metal fabrication, fencing, and farm equipment repair service based in Murfreesboro, TN. They serve the local community by addressing a frequent issue: damaged or sagging farm ...
J & A Fence is a trusted provider of fence and gate services for both residential and commercial properties in Smithville, TN. Located near the historic Smithville Town Square and serving neighborhood...
Sunset Fence and Decks serves homeowners in Manchester, TN, tackling common property issues like weathered fences, sagging decks, and cracked concrete. Many local homes, especially those near the Old ...
Master Fence is a locally owned and operated fencing company serving Murfreesboro and Middle Tennessee. With over five years of experience, we specialize in wood, vinyl, aluminum, and chain-link fenci...
Tri-Star Fence & Farm is a licensed fencing contractor based in Morrison, TN, serving Middle Tennessee homeowners and farm owners. For several years, the business focused on commercial projects like s...
Powell Fence Company LLC, established in 2005, is a locally owned fencing business serving Christiana, TN, and the surrounding areas of Rutherford, Bedford, and Coffee counties. Founded on a commitmen...
Precision Lawn Care & Landscaping
Precision Lawn Care & Landscaping, serving Christiana, TN, since 2009, brings nearly a decade of experience in transforming outdoor spaces. Founded by Tim, our team specializes in landscaping design, ...
Ram Fence Company is a well-established fence contracting business serving Joelton, Nashville, and the surrounding areas for over 15 years. We specialize in installing and repairing a wide range of fe...
Estimated Fencing Costs in Kenton, TN
Questions and Answers
How deep should my fence posts be in Kenton?
Footings must extend below the 12-inch frost line. The 2024 International Residential Code (IRC) Chapter 4 mandates this to prevent frost heave. Posts set in shallow concrete in Downtown Kenton will lift and fail within two winters.
Is my fence built to handle high winds?
Fences in Kenton must be engineered for a 105 MPH V-ult wind speed per ASCE 7-22 standards. This 'ultimate design wind speed' dictates post spacing, concrete footing mass, and bracket strength. A standard 6-foot privacy fence requires 4x4 posts on 8-foot centers or less to survive peak storm season gusts.
What are the first steps before digging post holes?
Call Tennessee 811 for a utility locate. This is a non-negotiable legal and safety requirement. Striking a buried line in Downtown Kenton results in major liability, repair costs, and fines. A professional manages this call and coordinates the subsequent permit with the Kenton Codes office before any excavation.
What fence materials work best with Kenton's soil?
Factor in moderate soil corrosivity and moderate termite risk. Pressure-treated pine or steel posts require hot-dip galvanized or stainless steel fasteners. Inferior hardware will rust, causing permanent streaks. Composite and vinyl resist corrosion but must be rated for the local termite pressure.
How soon can a crew start my fence project?
Consultations are scheduled based on routing efficiency. From Kenton City Hall, the primary route uses US-45W for material and crew dispatch. For addresses in the primary service zone, expect an initial site assessment within a 35-45 minute travel window following contact.
How tall can my fence be and where can I put it?
Kenton zoning permits 3-foot height in front yards and 6-foot in rear yards, with a 0-foot setback (allowed on the property line). Critical: corner lots must maintain a clear 'sight triangle' at intersections. Fences near US-45W cannot obstruct driver visibility; this is a strict code enforcement priority.
What are the rules for a pool fence gate?
IRC Appendix AG governs pool safety. Gates must be self-closing and self-latching with the release mechanism placed at least 54 inches high. While smart-gate IoT integration has low adoption in Kenton, an integrated electronic latch that meets these mechanical standards can satisfy both modern liability concerns and Tennessee code.
Do I need to tell my neighbor I'm replacing our shared fence?
Yes. Tennessee Code Annotated § 66-2-101 (the 'Good Neighbor Law') requires notification for any work on a partition fence. As of 2026, you must provide written notice to the adjoining landowner in Kenton before starting construction on a shared property line.
