Top Fencing Companies in Millersville, TN, 37072 | Compare & Call

There are 154 fencing companies server in Millersville TN

JC Fencing

JC Fencing

Helenwood TN 37755
Fences & Gates, Tree Services, Decks & Railing

JC Fencing is a small family-owned business based in Helenwood, TN, serving Scott, Morgan, Campbell, Anderson, and surrounding counties. We specialize in fences and gates, tree services, and decks and...

The Fence Revivors

The Fence Revivors

Knoxville TN 37922
Fences & Gates, Pressure Washers, Decks & Railing

Based in Knoxville, TN, The Fence Revivors has over 7 years of expertise in high-end wood restoration for fences, gates, decks, and railing. Our specialty lies in a proven four-step process: pressure ...

D and M Fence Co

D and M Fence Co

Oak Ridge TN 37830
Fences & Gates

D and M Fence Co is an established fencing contractor serving Oak Ridge, TN, and the surrounding East Tennessee area. The company specializes in the installation, repair, and maintenance of vinyl, woo...

All Wood Fencing And Decks

All Wood Fencing And Decks

1013 Newcomb Ln, Knoxville TN 37932
Fences & Gates, Decks & Railing

All Wood Fencing And Decks has been serving Knoxville homeowners for over a decade, specializing in deck construction, repair, and replacement. Knoxville's humid climate and frequent rain can cause wo...

Ryno's Restoration

Ryno's Restoration

Knoxville TN 37902
Patio Coverings, Fences & Gates

Ryno's Restoration provides expert fence and gate repair services to homeowners in Knoxville, TN. Many local homes face issues like storm-damaged fences, sagging gates, or rusted automatic openers, es...

Wittmer Property Management

Wittmer Property Management

★☆☆☆☆ 1.0 / 5 (1)
4815 E Emory Rd, Knoxville TN 37938
Landscaping, Pressure Washers, Fences & Gates

Wittmer Property Management has been serving Knoxville, TN, with reliable landscaping, pressure washing, and fence and gate services for years. Located near the University of Tennessee campus and just...

Beristain Fencing

Beristain Fencing

Maryville TN 37803
Fences & Gates

Beristain Fencing serves Maryville, TN, and the surrounding areas, offering expert fence and gate services including installation, repair, painting, staining, and weatherproofing. Many local homes fac...

Arch

Arch

★★★★★ 5.0 / 5 (1)
Corryton TN 37721
General Contractors, Fences & Gates, Painters

Arch is a general contracting company serving Corryton, TN, and the surrounding Knoxville area. We specialize in residential remodeling, fence and gate installation, and interior and exterior painting...

Factory to You Fence Southeast

Factory to You Fence Southeast

Loudon TN 37774
Fences & Gates, Patio Coverings, Decks & Railing

Factory To You Fence Southeast has served Loudon and the surrounding areas of southeast Tennessee for over two decades. Our focus is on quality fencing, gates, decks, and patio covers at a fair price....

Manuel Labor Construction

Manuel Labor Construction

Kodak TN 37764
Decks & Railing, Fences & Gates, Tiling

Manuel Labor Construction has served Kodak, TN, and surrounding East Tennessee communities for 32 years. As a small, family-oriented company, we focus on decks and railing, fences and gates, and tilin...



Estimated Fencing Costs in Millersville, TN

Emergency Fence/Gate RepairStorm / Security Response
$314 - $424
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$39 - $59
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $69
Standard Driveway Gate InstallEstimated Range
$1,134 - $1,519

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Millersville. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

Why do fence posts in Millersville City Center need footings below 12 inches?

Tennessee's 12-inch frost line requires footings to extend below this depth to prevent frost heave. Posts set in shallow concrete will lift during freeze-thaw cycles, causing permanent structural failure. IRC Section R403.1.4 mandates this for stability against the region's seasonal ground movement.

What is the required process before digging fence post holes?

State law requires contacting Tennessee 811 at least three full business days before any excavation. Utility lines in Millersville City Center are dense; hitting one incurs major repair costs and liability. This locate ticket is also a prerequisite for obtaining the necessary permit from the Millersville permit office.

How do modern gate systems meet pool safety and security needs?

Integrating smart-gate IoT systems with self-closing, self-latching mechanisms directly satisfies the 2018 IRC Appendix AG pool barrier code. This combination provides remote access control while maintaining the constant physical barrier required by Tennessee law, reducing liability through automated compliance.

How do Millersville's soil and pest conditions affect fencing material choice?

The area's moderate soil corrosivity and moderate-to-heavy termite risk dictate material compatibility. Pressure-treated wood must be rated for ground contact, and all fasteners should be hot-dip galvanized or stainless steel to prevent rust streaks. Non-cellulosic materials like vinyl or composite offer superior resistance to both corrosion and insect damage.

What is the typical timeline and process for starting a fencing project?

Following a site consultation, mobilization typically occurs within 7-10 business days. The standard route from Millersville City Hall via I-65 allows for a consistent 25-35 minute dispatch window to most City Center properties. This schedule accounts for the current average labor rate of $45/hour and material lead times.

How does the 115 MPH V-ult wind rating impact fence design?

The 115 MPH ultimate design wind speed, per ASCE 7-22 standards, dictates structural engineering. This V-ult rating requires reduced post spacing, deeper concrete footings, and the use of wind-rated brackets to transfer loads into the ground. Proper design ensures the structure survives peak storm season gusts without panel failure.

What are the height and setback rules for a fence on my Millersville property?

City zoning enforces a 4-foot height limit in the front yard and 8 feet in the rear, with a 0-foot setback allowing installation on the property line. Corner lots require special attention to 'sight triangles'—areas near intersections must remain clear for driver visibility, a critical safety measure for properties near I-65.

What is the legal requirement for notifying a neighbor before building a fence in Millersville?

Under Tennessee Code Annotated 66-2-201, the 'Good Neighbor Fence Law,' you must provide written notice to any adjoining property owner before replacing or building a shared boundary fence. As of 2026, this formal notification is a prerequisite to establishing shared cost liability and preventing disputes.



Scroll to Top
CALL US NOW