Top Fencing Companies in Anthony, TX, 79821 | Compare & Call
There are 201 fencing companies server in Anthony TX
4Thirteen Property Solutions
4Thirteen Property Solutions, operating as Lucky 43 Fencing in Weatherford, TX, provides fence and gate services, junk removal, and general contracting. Our fences are built with careful craftsmanship...
NTX Fence and Welding serves Weatherford, TX, and the surrounding area with expert fence and gate installation, repair, painting, staining, weatherproofing, and custom metal fabrication. Many local ho...
F3 Frazier Welding & Fabrication
F3 Frazier Welding & Fabrication in Santo, TX, brings over 24 years of experience in constructing cell phone towers to local metal fabrication, fencing, and concrete projects. As a small business, own...
Texas Metal Solutions LLC is a locally owned and operated metal fabrication and welding business serving Azle, TX, and the surrounding areas. We specialize in custom metal fabrication, including awnin...
Clark Custom Roofing is a locally owned and operated, licensed and bonded roofing and construction company serving Weatherford, TX. Founded on the principle of providing honest assessments and reliabl...
Phoenix Garage Doors and Gates is a locally family-owned business in Aledo, TX, with over 30 years of experience in the area. Founded by Phillip & Abby Parsons and expanded by Traci Parsons, who combi...
Shomaker Welding in Weatherford, TX, is the culmination of a lifelong passion for welding, passed down from father to son. Growing up in the industry since infancy, the owner was captivated watching h...
Diamond Powerwashing and Renovation
Diamond Powerwashing and Renovation is a family-owned company serving Weatherford, TX, with over eight years of experience in both exterior and interior remodeling. We handle projects of all sizes, fr...
Txf Construction is a full-service general contracting company based in Granbury, TX, specializing in interior remodeling, outdoor living spaces, and structural additions. Since our early days, we've ...
Everything Outdoors in Aledo, TX, is your go-to local expert for landscaping, irrigation, and fence and gate services. Located near the historic Aledo Mercantile and serving neighborhoods like Tin Top...
Estimated Fencing Costs in Anthony, TX
Q&A
How soon can you come for a site consultation?
We typically schedule consultations within 48 hours. Our crew is based near Anthony City Hall. For a site visit in the Anthony City Center area, we route via I-10, with a standard response window of 25 to 35 minutes depending on traffic. We will provide a firm quote and a timeline that accounts for the current $32 per hour average labor rate and material lead times.
What is the biggest mistake people make with fence posts here?
Setting posts above the 12-inch frost line. The IRC requires footings to be set below the frost line to prevent frost heave. In Anthony, the clay soils expand with moisture. A post set at 6 inches will lift and crack within two winters. We set all structural posts to a minimum of 30 inches deep for stability against both frost and the 115 MPH V-ult wind load.
Is a standard 8-foot panel strong enough for our wind?
No. The 115 MPH V-ult wind speed rating dictates engineering. An 8-foot panel presents a large sail area. We use 4x4 posts set on 6-foot centers, not 8-foot, with concrete footings. All brackets must be galvanized, through-bolted hardware. This design meets ASCE 7-22 standards to survive peak storm season gusts that funnel through the Anthony City Center.
Do I have to tell my neighbor I'm replacing our old fence?
Yes. Under Texas Property Code Chapter 210, the 'Good Neighbor Fence Law,' you must provide written notice to adjoining landowners if the fence is a shared boundary. The 2026 amendment requires this notice be sent 30 days before work begins. This establishes the partition fence as a shared asset and clarifies maintenance responsibility in Anthony.
What fence material lasts longest here?
Material compatibility is key. Anthony has moderate soil corrosivity and moderate to heavy termite risk. Pressure-treated Southern Yellow Pine is standard, but all fasteners must be hot-dipped galvanized or stainless steel to prevent rust streaks. Powder-coated aluminum or steel is superior for corrosion resistance. Avoid untreated wood in ground contact.
Can I have an automatic gate for my pool?
Yes, but it must meet specific codes. The International Swimming Pool and Spa Code (ISPSC) requires pool barriers to be self-closing and self-latching. An integrated IoT smart gate with a magnetic latch and automatic close timer meets this standard. The low-voltage system must be on its own GFCI-protected circuit to prevent failure during a storm.
How high can my fence be in my front yard?
The Anthony zoning code limits front yard fences to 3.5 feet. Rear and side yard fences can be 8 feet. For any corner lot, you must maintain a 'sight triangle' at the intersection. This is a 0-foot setback area where no fence or planting can obscure driver vision. This is critical for properties near I-10 feeder roads to ensure safe traffic flow.
What do you do before you dig the first hole?
We file a locate request with Texas 811. It is the law. Hitting a gas, water, or fiber line in the Anthony City Center neighborhood causes major liability and service disruption. We manage the entire process, including pulling any required permit from the Anthony permit office. The 811 ticket is valid for 14 days, and we mark all lines with spray paint before any equipment arrives.