Top Fencing Companies in Anthony, TX, 79821 | Compare & Call
There are 201 fencing companies server in Anthony TX
Yocum Services is a veteran-owned general contractor based in Weatherford, TX, established in 2019. We specialize in custom fencing, gates, and a wide range of construction services, from metal fabric...
Sims Welding and Repair in Granbury, TX, specializes in fence and gate installation, repair, painting, staining, and weatherproofing, along with trailer repair. Located near the historic Granbury Squa...
Affordable Patio Covers And More is your local neighbor in Granbury, TX, specializing in patio coverings, fences, and gates. Serving the community near the historic Granbury Square and the scenic Lake...
J&S Welding & Fabrication
J&S Welding & Fabrication has been serving Mineral Wells, TX, and the surrounding areas including Possum Kingdom Lake for years. Specializing in metal fabrication and rolling, they tackle common local...
JDM Lawn and Landscapes provides professional lawn care and fence services in Weatherford, TX, a community where severe weather like hailstorms and high winds frequently damage fences. Many homes in n...
Greenhaven Landscaping in Fort Worth, TX, provides full-service property care for both commercial and residential clients. Our team handles landscape construction, irrigation design and repair, and ro...
Ray's Fence in Boyd, TX, specializes in fence and gate installation, repair, painting, staining, and weatherproofing. Serving the Boyd community, including neighborhoods near Boyd High School and down...
Top Notch Excavating and Welding Services
Top Notch Excavating and Welding Services has served Stephenville, TX, for 25 years. We handle excavation, demolition, and fencing from initial site prep to final grading. Our work covers land clearin...
Ultra Steel Structures
Ultra Steel Structures, based in Fort Worth, TX, specializes in metal fabrication, fence and gate services, and metal building construction for homeowners, general contractors, and business owners. We...
Cruz Steady Welding Docks & More, based in Granbury, TX, is a veteran-owned metal fabrication company specializing in custom fences and gates. We combine precision craftsmanship with a commitment to e...
Estimated Fencing Costs in Anthony, TX
Q&A
How soon can you come for a site consultation?
We typically schedule consultations within 48 hours. Our crew is based near Anthony City Hall. For a site visit in the Anthony City Center area, we route via I-10, with a standard response window of 25 to 35 minutes depending on traffic. We will provide a firm quote and a timeline that accounts for the current $32 per hour average labor rate and material lead times.
What is the biggest mistake people make with fence posts here?
Setting posts above the 12-inch frost line. The IRC requires footings to be set below the frost line to prevent frost heave. In Anthony, the clay soils expand with moisture. A post set at 6 inches will lift and crack within two winters. We set all structural posts to a minimum of 30 inches deep for stability against both frost and the 115 MPH V-ult wind load.
Is a standard 8-foot panel strong enough for our wind?
No. The 115 MPH V-ult wind speed rating dictates engineering. An 8-foot panel presents a large sail area. We use 4x4 posts set on 6-foot centers, not 8-foot, with concrete footings. All brackets must be galvanized, through-bolted hardware. This design meets ASCE 7-22 standards to survive peak storm season gusts that funnel through the Anthony City Center.
Do I have to tell my neighbor I'm replacing our old fence?
Yes. Under Texas Property Code Chapter 210, the 'Good Neighbor Fence Law,' you must provide written notice to adjoining landowners if the fence is a shared boundary. The 2026 amendment requires this notice be sent 30 days before work begins. This establishes the partition fence as a shared asset and clarifies maintenance responsibility in Anthony.
What fence material lasts longest here?
Material compatibility is key. Anthony has moderate soil corrosivity and moderate to heavy termite risk. Pressure-treated Southern Yellow Pine is standard, but all fasteners must be hot-dipped galvanized or stainless steel to prevent rust streaks. Powder-coated aluminum or steel is superior for corrosion resistance. Avoid untreated wood in ground contact.
Can I have an automatic gate for my pool?
Yes, but it must meet specific codes. The International Swimming Pool and Spa Code (ISPSC) requires pool barriers to be self-closing and self-latching. An integrated IoT smart gate with a magnetic latch and automatic close timer meets this standard. The low-voltage system must be on its own GFCI-protected circuit to prevent failure during a storm.
How high can my fence be in my front yard?
The Anthony zoning code limits front yard fences to 3.5 feet. Rear and side yard fences can be 8 feet. For any corner lot, you must maintain a 'sight triangle' at the intersection. This is a 0-foot setback area where no fence or planting can obscure driver vision. This is critical for properties near I-10 feeder roads to ensure safe traffic flow.
What do you do before you dig the first hole?
We file a locate request with Texas 811. It is the law. Hitting a gas, water, or fiber line in the Anthony City Center neighborhood causes major liability and service disruption. We manage the entire process, including pulling any required permit from the Anthony permit office. The 811 ticket is valid for 14 days, and we mark all lines with spray paint before any equipment arrives.