Top Fencing Companies in Bedford, TX, 76021 | Compare & Call
There are 239 fencing companies server in Bedford TX
Legacy Overhead Door is a family-owned and operated business based in Keller, TX, dedicated to providing detailed, personal service with competitive pricing. We specialize in building custom garage do...
Rowley Fence serves Fort Worth, Texas, as a local fencing company specializing in wood privacy, chain link, and ornamental iron fence installation. We also provide professional fence and gate staining...
Cen-Tex Fencing serves homeowners in Keller, TX, providing durable fencing and gate solutions. A frequent challenge in the local climate is fence discoloration and sun-faded staining, which can make p...
316 Fences & Exteriors
316 Fences & Exteriors, established in 2018, is a licensed company serving Keller and the Dallas-Fort Worth area with a full range of exterior services. We specialize in installing concrete, wood, vin...
Bates Improvements is a home improvement company based in Keller, TX, specializing in fences, gates, and general contracting. We handle a wide range of projects, from total remodels to specific repair...
T Rock is a Fort Worth-based team handling roofing, painting, and fence and gate work. We serve neighborhoods near downtown and along the I-30 and I-35W corridors, including Fairmount, Ryan Place, and...
F P Kontracting is a family-owned home service provider serving Keller, TX, and the greater Dallas-Fort Worth area. They specialize in fences and gates, gutter services, and holiday decorating. For fe...
1st Post Fencing serves Fort Worth, TX as a fence installation contractor specializing in wood fence installation and exterior staining services. The company offers a range of fencing options, includi...
Acevedo's Custom Fencing & Flooring is a family-owned contractor serving Fort Worth, Lubbock, and the Dallas–Fort Worth Metroplex with over 30 years of experience. We specialize in fences, gates, deck...
Randy Bess Custom Fences has served Keller, TX, for over 30 years as a custom fence and gate builder. Operating as a small company with lower overhead, we pass savings directly to our clients. Each wr...
Estimated Fencing Costs in Bedford, TX
FAQs
What are the fence height and placement rules for a Bedford property?
Bedford zoning enforces a 4-foot height limit in front yards and 8 feet in rear yards. The 0-foot setback allows installation directly on the property line. For corner lots, especially near TX-183, a clear 'sight triangle' must be maintained for traffic visibility—typically no obstructions over 3 feet high within 25 feet of the intersection corner.
Why are proper concrete footings critical for a fence in Old Bedford?
Bedford's 6-inch frost line dictates footing depth. Posts set above this line will heave during freeze-thaw cycles, causing structural failure. IRC Table R301.2(1) requires footings below the frost depth to prevent this uplift. In Old Bedford's clay soils, a 12-inch diameter concrete footing per post is the standard for 8-foot wind-rated panels.
What is the utility locate and permitting process in Bedford?
Call Texas811 at least two business days before digging. They mark public lines; private lines require a separate locator. Hitting a marked line in Old Bedford creates major liability. The Bedford permit office requires a site plan and engineering details for review. We manage this paperwork to ensure the installation is fully documented and compliant.
What is your consultation timeline for a project in Old Bedford?
We dispatch from the Bedford Boys Ranch Park area. Routing via TX-183 allows a 15-25 minute response for a site consultation. After the utility locate and permit approval, crews typically mobilize within 5-7 business days, depending on material lead times. The average field labor rate for certified installers is $45 per hour.
How do modern pool fences integrate with smart home security?
2026 pool safety requires IRC Appendix AG / ISPSC compliance, including self-closing, self-latching gates. Integrated IoT smart latches now provide remote status alerts and auto-lock scheduling, creating an auditable trail. This meets updated liability standards for Texas homeowners by combining physical code compliance with digital monitoring.
How do Bedford's soil and pest conditions affect material choice?
Moderate soil corrosivity and moderate-to-heavy termite risk demand material compatibility. Pressure-treated pine must be rated for ground contact (UC4A). Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks. For termite resistance, consider steel posts or composite materials, avoiding untreated wood in direct soil contact.
How is a fence engineered for Bedford's 115 mph V-ult wind speed?
The 115 mph ultimate design wind speed (V-ult) per ASCE 7-22 dictates structural design. This requires reduced post spacing (often 6 feet on-center), 4x4 or larger posts, and wind-rated brackets. Panels must withstand peak storm season gusts from the north, which are channeled near TX-183. Standard 'privacy' panels often fail without this engineering.
What are the legal steps for replacing a shared fence in Bedford, TX?
Texas Property Code Chapter 247, updated for 2026, requires written notification to adjoining property owners at least 30 days before work begins on a shared boundary (partition fence). This 'good neighbor' law establishes a formal process for cost-sharing and dispute resolution. Failure to provide notice can result in liability for the full cost.
