Top Fencing Companies in Bigfoot, TX, 78005 | Compare & Call
There are 145 fencing companies server in Bigfoot TX
Telion Construction, LLC, owned by lifelong Texan Elisha Ruth Epperley, delivers residential and commercial construction services throughout Haslet and the greater DFW area. Established in 2019, the c...
KCS Construction has been serving the Pilot Point area for over 25 years with a focus on fences, gates, and metal structures. Our team of experienced professionals takes pride in every project, from b...
Hestand Boyz Helping Hand serves Tioga, TX, as a local handyman service specializing in home repair, fence installation, and tree care. The team focuses on clear communication, keeping clients informe...
LoneStar Pool and Deck serves Whitesboro, TX, and the surrounding area with expert deck construction, repair, and replacement services. Many local homes, especially those near the city's historic down...
James Blakley's Custom Construction
James Blakley's Custom Construction has been a trusted name in Sadler and throughout Grayson County for over 40 years. As a licensed general contractor, we specialize in excavation services, including...
Estimated Fencing Costs in Bigfoot, TX
Common Questions
What fencing material holds up best against Bigfoot's soil and pests?
Use pressure-treated Southern Yellow Pine or cedar for posts. The area has moderate soil corrosivity and moderate-to-heavy termite risk. Steel fasteners must be hot-dip galvanized; standard galvanized nails will rust and streak within 24 months in this environment.
What steps are required before digging fence post holes?
You must call Texas811 for a utility locate. Hitting a gas or fiber line in Bigfoot Town Center incurs major fines and repair liabilities. We manage the ticket and coordinate with the city permit office. All work requires a stamped site plan showing the fence line relative to property pins.
How deep do fence posts need to be set in Bigfoot, TX?
Posts require a minimum 24-inch footing depth. Bigfoot's 6-inch frost line is shallow, but IRC standards for 115 MPH V-ult wind loads mandate deeper footings for overturning resistance. Posts set above this depth in Bigfoot Town Center soil will heave and fail under lateral pressure.
What are the height and placement rules for fences in Bigfoot?
Zoning limits are 4 feet in front yards and 8 feet in rear yards, with a 0-foot setback allowing installation on the property line. Corner lots must maintain a clear 'sight triangle' at intersections. Fences near FM 472 cannot obstruct driver visibility, per city ordinance.
How soon can you start a fencing project in Bigfoot?
Consultations are scheduled within 48 hours. Our crew routes from the Bigfoot-Wallace Historical Marker via FM 472. Travel time to the Bigfoot Town Center area is 45-60 minutes. We provide a firm quote and projected start date following the on-site structural and zoning review.
Is a standard fence strong enough for Bigfoot's wind?
No. A 115 MPH V-ult wind rating requires engineering. We calculate post spacing and concrete footings per ASCE 7-22 standards. Standard 8-foot panel spacing will fail. Our designs use reinforced corners and wind-rated brackets to survive peak storm season gusts from the west.
Am I legally required to notify my neighbor before building a fence?
Yes, for any shared boundary. Texas Property Code Chapter 215 requires formal written notice to adjoining landowners in Bigfoot. For 2026 projects, we recommend documented delivery 30 days prior to starting work to comply with updated 'good neighbor' provisions.
Can I add a smart gate to a pool fence?
Yes, but integration is critical. The gate must meet IBC/IRC Appendix AG with self-closing, self-latching hardware and a 48-inch minimum height. We weld IoT latches onto structural frames. This meets Texas liability standards, though smart-gate adoption in Bigfoot remains low.
