Top Fencing Companies in China Grove, TX, 78263 | Compare & Call

There are 58 fencing companies server in China Grove TX

Pritchett Industries

Pritchett Industries

Murchison TX 75778
Fences & Gates, Siding, Painters

Pritchett Industries has been serving Murchison, Texas, for over 20 years, offering expert fence and gate installation, repair, painting, and weatherproofing, along with siding and painting services. ...

LoveLand Greenscapes

LoveLand Greenscapes

Palestine TX 75801
Landscaping, Fences & Gates

LoveLand Greenscapes serves Palestine, TX, offering comprehensive landscaping, fence, and gate services. The area’s shifting clay soils often cause fence post instability and loose panels. We address ...

Good Wood Texas

Good Wood Texas

Gun Barrel City TX 75156
Fences & Gates, Masonry/Concrete, Pressure Washers

Good Wood Texas serves Gun Barrel City, TX, providing expert fence and gate installation, repair, and masonry/concrete services. Located near the shores of Cedar Creek Reservoir and close to popular s...

Freedom Construction

Freedom Construction

Seven Points TX 75143
General Contractors, Fences & Gates, Painters

Freedom Construction has been serving Seven Points, TX, since 2011, offering remodeling and fence services for local homeowners. As a single father raising two kids, the owner brings dedication to eve...

Concrete Smith

Concrete Smith

Mesquite TX 75150
Masonry/Concrete, Fences & Gates, Patio Coverings

Concrete Smith is a family-owned business based in Mesquite, TX, serving the community since 2014. With over 20 years of combined experience in concrete and fencing, we focus on quality work that look...

3E Welding Services

3E Welding Services

410 Silva Rd, Diboll TX 75941
Metal Fabricators, Fences & Gates

3E Welding Services in Diboll, TX, is a local metal fabrication and fencing company founded by a welder who honed his craft from childhood and through formal training at Tulsa Welding School. After ye...

Double J Fencing Construction

Double J Fencing Construction

Palestine TX 75801
Fences & Gates

Double J Fencing Construction serves homeowners in Palestine, TX, with professional fence and gate installation, repair, painting, staining, and weatherproofing. Local residents often face challenges ...

Fisher Fencing and construction

Fisher Fencing and construction

Frankston TX 75763
Decks & Railing, Fences & Gates, Handyman

Fisher Fencing and Construction is a trusted local contractor serving Frankston, TX, and the surrounding areas. Specializing in decks, railing, fences, gates, and general handyman services, the compan...

« Previous PagePage 6 of 6Next »


Estimated Fencing Costs in China Grove, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for China Grove. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

Will my fence withstand high winds?

Only if engineered for the local V-ult wind speed of 115 MPH. This rating dictates post spacing, concrete footing size, and bracket strength. Fences near open areas or US-87 require closer post spacing and reinforced corner posts to survive peak storm season gusts, per ASCE 7-22 standards for wind loads.

How deep should fence posts be in China Grove?

Posts must be set at least 6 inches below the frost line to prevent frost heave. In China Grove Estates, posts set in shallow footings will heave and fail within two winters. The 2021 IRC requires footings to extend below the local frost depth for structural stability against soil movement.

What are the height and placement rules for fences?

China Grove zoning limits fences to 4 feet in front yards and 8 feet in rear yards, with a 0-foot setback allowing installation on the property line. For corner lots near US-87, you must maintain a clear 'sight triangle' at intersections. This zone prohibits visual obstructions over 3 feet high for driver safety.

Do I need to tell my neighbor before building a fence?

Yes. Texas Property Code Chapter 91 and local common law in China Grove require notification for any work on a shared boundary, or 'partition fence.' As of 2026, you must provide written notice to adjoining property owners before replacing a shared fence line. This prevents legal disputes over cost and maintenance responsibility.

Can I have a smart gate with a pool?

Yes, but integration is critical. Any gate providing pool access must meet 2021 IRC/ISPSC standards: self-closing, self-latching, and a minimum 48-inch height. Modern IoT latches can be integrated to meet these codes, providing remote access logging while maintaining the required physical safety mechanisms for Texas liability coverage.

What steps are required before digging post holes?

You must contact Texas811 for a utility locate at least two business days before excavation. Hitting a gas or fiber line in China Grove Estates results in major liability, service outages, and fines. A professional crew manages this ticket and coordinates any required permit paperwork with the city office before the first hole is dug.

How soon can a crew start a project?

A consultation is typically scheduled within 48 hours. Our route from China Grove City Park via US-87 to China Grove Estates allows for a 25-35 minute response. Following the site assessment and utility locate, project start dates are confirmed based on material lead times and the current labor rate average of $45 per hour.

What is the best fence material for China Grove's soil?

Material compatibility is non-negotiable. With a Moderate Soil Corrosivity Index and Very Heavy termite risk, pressure-treated pine or steel posts with concrete encasement are required. Use only hot-dip galvanized or stainless steel fasteners to prevent rust streaks. Untreated wood or aluminum in ground contact will fail prematurely.



Scroll to Top
CALL US NOW