Top Fencing Companies in Colorado City, TX, 79512 | Compare & Call
There are 186 fencing companies server in Colorado City TX
Blastline Welding has been serving Midlothian, Texas, and the surrounding areas with expert mobile welding and repair services. We specialize in fence and gate installation, repair, painting, staining...
Acevedo's Custom Fencing & Flooring is a family-owned contractor serving Fort Worth, Lubbock, and the Dallas–Fort Worth Metroplex with over 30 years of experience. We specialize in fences, gates, deck...
Everlast Gates & Fence is a locally owned and operated fencing company serving Burleson, TX, and the surrounding areas. We understand the unique challenges faced by local homeowners, such as sun-faded...
Mowing & More is a family-owned business serving Burleson, TX, for over 8 years. We specialize in lawn care, fence and gate installation and repair, and a wide range of handyman services including app...
Ace Handyman Services - Burleson
Kevin, a longtime Midlothian resident and owner of Ace Handyman Services - Burleson, has been serving Johnson and Ellis Counties since 2021. With over 100 years of combined experience among our team, ...
Busy B Enterprises, operating as Busy B Handyman & Remodeling Services in Burleson, TX, is a veteran-owned business led by owner-operator Roger. With over 25 years in the home service industry, Roger ...
Tatum Legacy, a licensed roofing contractor established in 2016 in Burleson, TX, brings a family tradition of quality craftsmanship. Owner Jesse Tatum learned the trade from his father starting at age...
Fenced In provides expert fence and gate services to Burleson, TX, and the surrounding area. Located near the Burleson Recreation Center and along the I-35W corridor, we address common local issues li...
Defender Fence Company is a trusted fence contractor serving residential and commercial clients in Burleson, Texas, and across the DFW Metroplex. We specialize in installing, repairing, painting, stai...
Valentine Construction, based in Burleson, TX, is your go-to team for roofing, general contracting, and fence and gate services. We understand the unique challenges of local properties, especially the...
Estimated Fencing Costs in Colorado City, TX
Common Questions
Will my fence rust or attract termites?
Material compatibility prevents this. Colorado City has moderate soil corrosivity and termite risk. Galvanized steel posts are acceptable, but we use hot-dip galvanized fasteners to prevent rust streaks on masonry. For wood, pressure-treated lumber rated for ground contact is mandatory. Composite materials offer a zero-maintenance alternative with no corrosion or insect risk.
What's the first step before you dig the first post hole?
Call Texas811. It's the law. Hitting a buried utility line in Downtown Colorado City causes major liability, service outages, and fines. Texas811 marks public lines for free. We then submit the locate ticket and engineered plans to the permit office for review. Managing this paperwork upfront prevents costly project delays and legal issues.
Is a standard fence strong enough for our wind?
No. Colorado City has a V-ult wind speed of 115 mph. This ultimate design wind speed dictates engineering. Standard 8-foot panel spacing often fails. We design to ASCE 7-22 standards, using closer post spacing (6 feet), deeper concrete footings, and wind-rated brackets to survive peak storm season gusts, especially in exposed areas near I-20.
What's the most common reason fence posts fail in Colorado City?
Frost heave. The frost line is 12 inches deep. Posts set in concrete above this depth will lift during freeze-thaw cycles, causing structural failure. IRC Section R403.1.4.1 requires footings to extend below this line. We excavate a minimum of 24 inches for post holes in Downtown Colorado City to ensure stability.
How soon can you start a consultation?
We typically schedule site consultations within 48 hours. Our crew routes from the Colorado City Civic Center, taking I-20 for direct access to most neighborhoods. Expect a 10-15 minute travel time for properties in Downtown Colorado City. The consultation includes a zoning check, wind exposure assessment, and a detailed quote based on a $32/hour average labor rate.
Does a smart gate meet pool safety codes?
Yes, if integrated correctly. IRC Appendix AG and Texas Health and Safety Code Chapter 757 require pool barriers with self-closing, self-latching gates. An IoT-enabled smart gate must have a primary mechanical latch that automatically engages. The electronic access is a secondary feature. This dual-system design meets 2026 liability standards for Texas homeowners.
What are the fence height rules for my corner lot?
Colorado City zoning limits fences to 3 feet in front yards and 8 feet in rear yards. A zero-foot setback allows building directly on your property line. Critical for corner lots: you must maintain a clear 'sight triangle' at intersections. Near I-20, this visibility zone is strictly enforced for traffic safety. No solid fencing is permitted within this triangle.
Am I legally required to talk to my neighbor before building a fence?
Yes, for partition fences. Texas Property Code Chapter 210, the 'Good Neighbor Fence Act,' mandates written notice to adjoining landowners before replacing a shared boundary fence. As of 2026, this notice must be sent via certified mail at least 30 days prior to starting work in Colorado City. It details cost-sharing and design.
