Top Fencing Companies in Colorado City, TX, 79512 | Compare & Call
There are 186 fencing companies server in Colorado City TX
Bailey Construction & Fencing has been serving Waxahachie and the surrounding areas for fifteen years. As a family-owned business, we treat every project with the same care and attention we would give...
Texas Allstar Contractors
Texas Allstar Contractors is a family-owned business serving Waxahachie, TX, and the surrounding areas. We specialize in installing and repairing fences and gates, including automatic and manual syste...
Taylored Services, based in Alvarado, TX, is a licensed fencing contractor with over 80 years of combined experience. We specialize in designing, installing, and maintaining wrought iron and wood fenc...
Building Bro’s in Venus, TX, is a general contracting business run by a 36-year-old husband and father of two. With 19 years of hands-on building experience—including a decade at Home Depot—the owner ...
Diamond J Welding Fence & Gate Service, based in Grandview, TX, has been a trusted name in the fencing industry since 2011. Owner John brings over 35 years of hands-on experience, personally fabricati...
EBrothers Exteriors is a locally owned and operated home improvement company serving Seagoville, TX, and the surrounding areas. We specialize in roofing, fencing and gates, and general contracting. Ou...
AA Fencing in Ennis, TX, has been a trusted provider of fencing, welding, and metal fabrication services since 2008. What began as a small backyard operation has grown into a full-service company serv...
Kimbriel Fabrication provides professional fence and gate services in Cleburne, TX, serving homeowners near Lake Pat Cleburne and historic downtown. The company addresses common local problems like lo...
Chong Welding and Construcción, based in Wilmer, TX, is a dedicated team providing expert metal fabrication, fencing, gate installation, and masonry and concrete services. We approach every project wi...
JDG Fabrication Group serves Dallas homeowners and businesses with custom metal fabrication, deck construction, and fence and gate solutions. Located in the heart of Dallas, we are familiar with the s...
Estimated Fencing Costs in Colorado City, TX
Common Questions
Will my fence rust or attract termites?
Material compatibility prevents this. Colorado City has moderate soil corrosivity and termite risk. Galvanized steel posts are acceptable, but we use hot-dip galvanized fasteners to prevent rust streaks on masonry. For wood, pressure-treated lumber rated for ground contact is mandatory. Composite materials offer a zero-maintenance alternative with no corrosion or insect risk.
What's the first step before you dig the first post hole?
Call Texas811. It's the law. Hitting a buried utility line in Downtown Colorado City causes major liability, service outages, and fines. Texas811 marks public lines for free. We then submit the locate ticket and engineered plans to the permit office for review. Managing this paperwork upfront prevents costly project delays and legal issues.
Is a standard fence strong enough for our wind?
No. Colorado City has a V-ult wind speed of 115 mph. This ultimate design wind speed dictates engineering. Standard 8-foot panel spacing often fails. We design to ASCE 7-22 standards, using closer post spacing (6 feet), deeper concrete footings, and wind-rated brackets to survive peak storm season gusts, especially in exposed areas near I-20.
What's the most common reason fence posts fail in Colorado City?
Frost heave. The frost line is 12 inches deep. Posts set in concrete above this depth will lift during freeze-thaw cycles, causing structural failure. IRC Section R403.1.4.1 requires footings to extend below this line. We excavate a minimum of 24 inches for post holes in Downtown Colorado City to ensure stability.
How soon can you start a consultation?
We typically schedule site consultations within 48 hours. Our crew routes from the Colorado City Civic Center, taking I-20 for direct access to most neighborhoods. Expect a 10-15 minute travel time for properties in Downtown Colorado City. The consultation includes a zoning check, wind exposure assessment, and a detailed quote based on a $32/hour average labor rate.
Does a smart gate meet pool safety codes?
Yes, if integrated correctly. IRC Appendix AG and Texas Health and Safety Code Chapter 757 require pool barriers with self-closing, self-latching gates. An IoT-enabled smart gate must have a primary mechanical latch that automatically engages. The electronic access is a secondary feature. This dual-system design meets 2026 liability standards for Texas homeowners.
What are the fence height rules for my corner lot?
Colorado City zoning limits fences to 3 feet in front yards and 8 feet in rear yards. A zero-foot setback allows building directly on your property line. Critical for corner lots: you must maintain a clear 'sight triangle' at intersections. Near I-20, this visibility zone is strictly enforced for traffic safety. No solid fencing is permitted within this triangle.
Am I legally required to talk to my neighbor before building a fence?
Yes, for partition fences. Texas Property Code Chapter 210, the 'Good Neighbor Fence Act,' mandates written notice to adjoining landowners before replacing a shared boundary fence. As of 2026, this notice must be sent via certified mail at least 30 days prior to starting work in Colorado City. It details cost-sharing and design.
