Top Fencing Companies in Combes, TX, 78535 | Compare & Call

You must contact Texas 811 at least two business days before excavation. In Combes City Center, hitting an unmarked utility line is a major liability for repair costs and service disruption. After clear marks are received, the Combes permit office requires the 811 ticket number and a site plan for approval. We manage this paperwork as part of the contract to ensure compliance.

A site consultation is the first step. From Combes City Hall, we route via US-77 for a 15-20 minute response to your property. After the survey, we provide a wind-load compliant design and coordinate Texas 811. With permit in hand, mobilization typically occurs within 10-14 business days, accounting for the current $35/hr labor market and material lead times.

Yes, but integration is critical. The 2021 ISPSC and ASTM F1908 require pool barriers to be non-climbable and have self-closing, self-latching gates. A smart gate system must have a mechanical latch that engages automatically upon closing, regardless of IoT function. The low-moderate smart gate trend in Texas now focuses on these integrated, code-compliant systems to limit homeowner liability.

Texas Property Code Chapter 247, updated for 2026, mandates written notification to adjoining landowners before altering a shared boundary 'partition fence.' In Combes, you must provide this notice and a description of the proposed fence. Failure to comply can result in a civil action for damages and cost recovery. This is distinct from the 0-foot setback allowance.

Combes zoning enforces a 3-foot height limit in the front yard and an 8-foot limit in the rear, measured from grade. The 0-foot setback allows building directly on the property line. For corner lots, a visibility 'sight triangle' is enforced at intersections. Fences near US-77 must not obstruct driver sightlines, typically requiring the first 15 feet from the property corner to be under 3 feet high.

Very Heavy termite risk and Moderate soil corrosivity dictate specific materials. Pressure-treated Southern Yellow Pine is standard, but ground contact must be UC4A treated. For metal, use galvanized steel posts with powder-coated pickets. All fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks from corrosive soils. Avoid untreated wood and standard aluminum in ground contact.

The V-ult 130 MPH wind speed is an ultimate design load per ASCE 7-22. This engineering standard dictates post spacing, concrete footing size, and bracket strength. For a solid panel fence, standard 8-foot post spacing is inadequate. Designs must use 6-foot centers, embedded post bases, and wind-rated tension brackets to survive straight-line gusts common after 2026.

The 0-inch frost line is a stability minimum, not a design standard. IRC R403.1.4.1 requires footings to resist wind uplift and overturning. For a 130 MPH V-ult wind rating, posts in Combes require engineered concrete footings to prevent racking and collapse during peak storm season gusts from the US-77 corridor. A simple post-in-dirt installation will fail.