Top Fencing Companies in Cross Roads, TX, 76227 | Compare & Call
There are 34 fencing companies server in Cross Roads TX
Blake Hughes Welding, based in Sour Lake, TX, specializes in metal fabrication and fence and gate services for both residential and commercial properties. Located near the historic Sour Lake Springs a...
Corona’s Landscaping in Beaumont, TX, offers expert fence and gate services combined with lawn care. Many local homeowners face gate alignment problems and broken latches due to the region’s humid cli...
Building Depot, though new to Vidor this year, brings over 25 years of hands-on experience in metal fabrication, general contracting, and fence installation. We operate with more than 30 skilled crews...
Ace Fencing, serving Groves, TX, and the surrounding Beaumont, Golden Triangle, and Houston areas for over 20 years, specializes in a full range of fencing services. From wood and metal fences to cust...
Performance Outdoor Services
Performance Outdoor Services, based in Orange, TX, has grown from a single lawn mower route into a leading outdoor living contractor in the Golden Triangle. Founded after the owner lost his father, th...
SETX Deck and Fence, based in Beaumont, TX, specializes in custom outdoor solutions for Southeast Texas homeowners. We focus on composite deck construction, privacy fence installation, gate and operat...
GO Custom Gates is a family-owned business in Cleveland, TX, run by a husband-and-wife team along with their 14-year-old son. The husband brings over 10 years of welding experience to every project, h...
Signature Fencing provides professional fence and gate services to homeowners and businesses in Mont Belvieu, TX. Located near the intersection of FM 3180 and Eagle Drive, they are a trusted local res...
Green Shield and The Sword LLC is a family-owned and Christian-based home services company serving Conroe, Texas, and the surrounding Houston and Montgomery County areas. Founded by Ramses and Priscil...
Orange Fence Company serves homeowners in Bridge City, TX, specializing in fences, gates, decks, and railing. The intense heat in this area often causes fence cracking and hardware failures. We addres...
Estimated Fencing Costs in Cross Roads, TX
Question Answers
Can I install a smart gate on a pool fence?
Yes, but integration must comply with ISPSC 2021 and ASTM F1908 standards. Smart gate IoT latches must self-close and self-latch automatically. This meets modern liability standards for Texas homeowners by combining access control with mandated pool safety.
What are the critical steps before digging fence post holes?
You must contact Texas811 at least two business days before digging for a utility locate. Hitting a gas or fiber line in Cross Oak Ranch is a major liability. A professional crew manages this call and pulls any required permits from the local permit office.
Do I need to notify my neighbor before building a fence on the property line?
Yes. Under Texas Property Code Chapter 247, you must provide written notice to adjacent property owners before replacing a shared 'partition fence' on the boundary line. As of 2026, Cross Roads enforces this good-neighbor law to prevent disputes.
How deep should fence posts be set in Cross Roads, TX?
Posts require a 24-inch minimum footing depth, exceeding the local 6-inch frost line to prevent frost heave. Per IRC Section R403.1.4, footings in the Cross Oak Ranch area must extend below the frost line. Posts set shallower will lift and fail during freeze-thaw cycles.
How soon can a crew start a project in Cross Oak Ranch?
After a site consultation, we typically schedule work within 10-14 days. Our route from the Cross Roads Town Hall via US-380 allows for a 35-45 minute dispatch time to your property for initial assessment and measurement.
Is my fence designed to handle high winds?
Fences must be engineered for the local 115 MPH V-ult wind speed. This rating dictates maximum post spacing, concrete footing size, and bracket strength. Proper design ensures the structure survives peak storm season gusts common in North Texas.
What fence materials work best given the local soil and pests?
Use pressure-treated wood rated for ground contact and termite resistance, suitable for the area's Moderate to Heavy termite risk. All fasteners and hardware must be G90 galvanized steel to withstand the Moderate soil corrosivity index and prevent rust streaks.
What are the height and placement rules for fences in Cross Roads?
Zoning limits fences to 4 feet in front yards and 8 feet in rear yards. A 0-foot setback allows building directly on the property line. Corner lots must maintain a clear 'sight triangle' for traffic visibility, a critical rule for properties near high-speed corridors like US-380.
