Top Fencing Companies in Edgewood, TX, 75117 | Compare & Call
There are 100 fencing companies server in Edgewood TX
TX Gate & Fence has been serving Buchanan Dam and the surrounding Llano County area for the past decade, building custom gates and fences that meet the practical needs of local ranches, homes, and bus...
EC Construction is a family-owned and operated business based in Bertram, TX, bringing 38 years of hands-on experience to central Texas. We specialize in a full range of services including fences and ...
CR Welding & Fabrication
CR Welding & Fabrication, based in Fredericksburg, TX, brings over five years of custom steel experience to the Texas Hill Country. Owner Cody R. learned welding in high school, graduated from welding...
Red Glass Ironworks, owned and operated by Bryan J. Burke in Jonestown, TX, specializes in custom metal fabrication, gates, and unique art pieces. With over 23 years of experience, Bryan draws inspira...
Gomez Construction Services
Gomez Construction Services is a family-owned and operated business based in Buda, TX. Our team consists of highly experienced professionals dedicated to enhancing residential outdoor spaces. We speci...
Sweazey Welding Service, located in Spicewood, TX, provides reliable metal fabrication and fencing solutions to residents and businesses across Central Texas. With years of hands-on experience, we spe...
B2 Welding, a veteran-owned business based in Lakeway, TX, brings over 25 years of experience to metal fabrication and fence and gate services. Serving Lakeway and extending to Fredericksburg, the com...
Decksperts, owned and operated by Zachary Moore, brings over 20 years of construction experience to Point Venture, TX. Specializing in decks, railings, fences, gates, and carpentry, the company focuse...
Arneson Land Services
Arneson Land Services, based in Dripping Springs, TX, is a licensed and insured general contractor specializing in excavation, fencing, and land management. With a focus on timely project execution, t...
Benchmark Texas Construction Company
Benchmark Texas Construction Company in Burnet, TX brings over 35 years of experience in custom fence, gate, and deck contracting. As general contractors, we prioritize quality over quantity—building ...
Estimated Fencing Costs in Edgewood, TX
Questions and Answers
What preparation is required before you dig fence post holes?
State law mandates a Texas811 utility locate request at least two business days before digging. Hitting a gas, water, or fiber line in Edgewood Center is a major liability causing service outages and repair fines. We manage the entire process, filing the locate request and securing any required permit from the Edgewood permit office to ensure a compliant start.
What fencing materials hold up best against Edgewood's soil and pests?
Material compatibility is critical. The moderate soil corrosivity index demands G90 galvanized steel posts and fasteners to prevent rust streaks. Given the moderate-to-heavy termite risk, pressure-treated pine posts must be rated for ground contact (UC4A). Composite or metal components offer the highest durability for the substructure.
How soon can you start a fencing project in Edgewood?
After a site consultation, we typically schedule work within 10-14 days. Our crew routes from the Edgewood City Park area via US-80. Given current traffic patterns, this allows for a 25-35 minute response time to most neighborhoods in the city for that initial assessment.
How is a fence engineered to survive 115 MPH winds in Edgewood?
The 115 MPH V-ult wind speed is a design standard, not an average. It dictates structural calculations per ASCE 7-22. To resist peak storm season gusts, we reduce standard post spacing from 8 feet to 6 feet, use 6x6 posts instead of 4x4, and specify through-bolt brackets. This increases the fence's ultimate load capacity.
What are the height and placement rules for fences in Edgewood, TX?
Edgewood zoning enforces a 4-foot height limit in front yards and an 8-foot limit in rear yards. The 0-foot setback allows building directly on your property line. For corner lots near US-80, you must maintain a clear 'sight triangle' at the intersection. No fence can block driver visibility within 25 feet of the property corner.
Can I add a smart gate to a pool fence and still meet safety codes?
Yes, with integrated hardware. The IBC/IRC Appendix AG pool code requires a self-closing, self-latching gate with a 48-inch minimum height. Modern IoT gate operators can integrate with these mechanical latches, providing remote access while maintaining the required fail-safe closure. This meets both Texas liability standards and the low-to-moderate smart-gate trend for 2026.
Am I legally required to notify my neighbor before building a fence on our shared property line?
Yes. Texas Property Code Chapter 247, updated for 2026, classifies a fence on a shared boundary as a 'partition fence.' You must provide written notice to the adjoining property owner before construction or replacement. This is a strict legal requirement in Edgewood to prevent neighbor disputes over shared maintenance responsibilities.
Why do fence posts in Edgewood Center need such deep concrete footings?
The 6-inch frost line depth in Edgewood creates seasonal movement. Posts not set below this line are subject to frost heave, which lifts and cracks footings. Per IRC R403.1.4, footings must extend below the frost line for stability. We install 30-inch deep footings to provide permanent load resistance.