Top Fencing Companies in Fresno, TX, 77545 | Compare & Call
There are 237 fencing companies server in Fresno TX
Goodworks Fence and Iron LLC serves Dime Box, TX, as a provider of residential metal solutions. We design, fabricate, and install custom ornamental iron fences, gates, and railings, combining aestheti...
Brewers Remodeling is a locally owned handyman and general contracting service based in Harker Heights, TX, serving homeowners across the area. From fence and gate repair to bathroom remodeling and dr...
Fences By Farr has served Temple, TX and the surrounding central Texas area for over 20 years, providing durable fencing solutions for both residential and commercial properties. As a premier local fe...
Adams Barn and Fence Co provides professional fence and gate installation, repair, and weatherproofing services to Belton, TX, and the surrounding area. We also offer comprehensive handyman services i...
South Strong Landworks and Pavestone, owned by Brad, brings over 33 years of excavation and construction experience to Hutto, TX. We specialize in driveway construction, retaining walls, patios, walkw...
J & D Construction is a family-owned business serving Killeen, TX, with a focus on fences, gates, decks, and painting. We bring the quality and reliability of larger companies, but with the personal a...
Texas Backyards has been a trusted provider of custom decks, fences, and patio coverings for Georgetown, TX homeowners. Located just off Williams Drive near San Gabriel Park, we specialize in solving ...
Hector Painting and More serves the Killeen, TX community with professional painting and fencing services. For homeowners dealing with frequent fencing problems like hardware failures and post instabi...
LHR Backyards is a family-owned business serving Thornton, TX, run by a husband-and-wife team who share a deep commitment to quality and community. Founded in 2021 by the owner and his brother, Gabe, ...
Spartan Builders
Spartan Builders is owned by a veteran and family man who believes in integrity, hard work, and going the extra mile for Harker Heights homeowners. With 22 years of industry expertise, we handle every...
Estimated Fencing Costs in Fresno, TX
FAQs
What is the typical timeline and route for a consultation in Fresno, TX?
We dispatch from the Fresno Community Park area. Travel via Texas State Highway 288 to most neighborhoods in the district takes 35-45 minutes. Following the utility locate and permit approval, field work typically begins within 5-7 business days, depending on the current labor schedule averaging $38 per hour for skilled installation.
What are the height and setback rules for fences in my Fresno, TX yard?
Fresno zoning limits fences to 4 feet in front yards and 8 feet in rear yards, with a 0-foot setback allowing installation on the property line. Corner lots near Texas State Highway 288 require a clear 'sight triangle'—typically a 10-foot area from the property corner—free of visual obstructions above 3 feet for driver safety.
What are my legal duties when replacing a shared fence on the property line?
Texas Property Code Chapter 247, the 'Good Neighbor' law, requires written notice to adjoining landowners before altering a shared boundary fence in Fresno. The 2026 update clarifies this applies to full replacement. Provide notice 30 days prior to work to avoid disputes and potential claims for partition fence contribution.
How does the 125 MPH V-ult wind speed rating impact fence design?
The 125 MPH ultimate design wind speed (V-ult) from ASCE 7-22 standards dictates engineering. For Fresno's peak storm season, this requires reduced post spacing (often 6-foot centers), deeper concrete footings, and wind-rated structural brackets. A standard 'privacy' panel fence will fail without these calculations to handle uplift and shear forces.
How do smart gates and pool safety codes intersect for modern fences?
A self-closing, self-latching gate meeting IBC/IRC Appendix AG is mandatory for pools. The moderate smart-gate trend integrates IoT-controlled latches that log access and confirm secure closure, providing both compliance and a digital audit trail. This integration is a best practice for managing liability under Texas premises law.
How do Fresno's soil and termite risks affect material selection?
Very heavy termite risk and moderate soil corrosivity dictate material compatibility. Pressure-treated pine must be rated for ground contact and include a termiticide. For metal posts and hardware, use hot-dip galvanized or stainless steel fasteners to prevent rust streaks from corrosive soil, which degrades both appearance and structural integrity.
What is the utility locate and permit process before digging in Fresno?
Call Texas 811 at least two business days before excavation. They mark public utility lines. Hitting an unmarked line in the Fresno Residential District is a major liability for repair costs and service disruption. Concurrently, file for a fence permit with the local office; the 811 ticket is typically a required attachment for approval.
Why is the frost line critical for fence post footings in Fresno, TX?
The 6-inch frost line in the Fresno Residential District requires footings to extend below this depth. Shallow posts will lift from frost heave, causing permanent racking and failure. IRC Section R403.1.4 mandates this depth to ensure your fence withstands seasonal soil movement without costly realignment.