Top Fencing Companies in Fulton, TX, 78358 | Compare & Call
There are 26 fencing companies server in Fulton TX
Mendoza Iron & Construction, a family-owned El Paso business founded in July 2018 by Rudy Mendoza, started with a distinctive fencing design that quickly gained popularity across the city. After Rudy'...
Level Up Privacy Fencing, based in El Paso, TX, specializes in fence and gate installation for both residential and commercial properties. Serving neighborhoods from the Upper Valley to the East Side,...
Black Ox Steel, based in El Paso, TX, is a welding and fabrication company that serves both commercial and residential clients. Our expertise spans metal fabrication, fence and gate installations, aut...
Best Iron Works & Fences
Best Iron Works & Fences is a family-owned ironwork company based in El Paso, Texas, serving the area since 1986. We specialize in custom wrought iron designs for residential, commercial, and industri...
Since 2015, Five Points Gates & Garage Doors has been the go-to choice for El Paso families needing reliable fence, gate, and garage door services. Owned by Ryan, a leader who brings genuine care and ...
El Paso Fencing Experts, established in 1997, is a locally owned fencing contractor serving residential and commercial clients throughout El Paso, TX. We specialize in the installation and repair of v...
STS Fencing, a licensed general contractor, has been providing fence and gate solutions in El Paso, TX, Las Cruces, NM, and the surrounding areas. The company specializes in a wide range of services i...
D J O Contractors
D J O Contractors is a licensed home remodeling contractor in El Paso, TX, with over 10 years of experience designing and building outdoor living spaces. We specialize in concrete and masonry work, fe...
Valley Fence serves Canutillo, TX, providing expert fence and gate services tailored to local needs. Located near the Canutillo High School and just off I-10, our team understands the unique challenge...
Sparks Metalworks
Sparks Metalworks brings generations of metalworking experience to El Paso, Texas. Although we are a newly established company, our family has over 40 years of combined expertise in the metal industry...
Estimated Fencing Costs in Fulton, TX
Questions and Answers
What is required before digging fence post holes?
You must contact Texas 811 for a utility locate at least two business days before excavation. Hitting a gas, water, or fiber line in Downtown Fulton is a major liability. We manage the permit paperwork with the city office to ensure the project meets all local codes before any work begins.
How does the 150 MPH wind rating affect my fence design?
The V-ult wind speed is an ultimate design load. This engineering standard dictates closer post spacing, heavier-gauge materials, and reinforced concrete footings. Brackets and connections must be rated for this load to survive peak storm season gusts, especially in exposed areas near Fulton Harbor Park.
What are the height and setback rules for a fence on my Fulton property?
Zoning limits are 4 feet for front yards and 8 feet for rear yards. The 0-foot setback regulation allows building directly on the property line. For corner lots, maintain a clear 'sight triangle' at intersections, especially near TX-35, where visibility for traffic is critical and enforced.
Do smart gates meet Texas pool safety codes?
Yes, when integrated correctly. International Residential Code Appendix AG and Texas Health and Safety Code Chapter 757 require self-closing, self-latching gates. IoT-enabled smart gates with automatic latching sensors can meet these modern liability standards, aligning with the moderate smart-gate trend for enhanced security.
How soon can a crew start on my project?
Consultations are typically scheduled within 1-2 business days. Our route from Fulton Harbor Park via TX-35 allows for a 15-25 minute response to most Downtown Fulton locations. After the site survey and utility locate, project start depends on material lead times and the permit approval cycle.
Am I legally required to notify my neighbor before building a fence on the property line?
Yes. Texas Property Code Chapter 247, the state's good neighbor law, requires written notice to adjoining landowners before constructing or replacing a partition fence on a shared boundary line in Fulton. This is a strict 2026 legal requirement to prevent disputes.
What fencing materials are suitable for Fulton's soil and pest conditions?
Fulton has high soil corrosivity and a very heavy termite risk. Use hot-dip galvanized or stainless steel posts and fasteners. Composite or metal materials are recommended. Incompatible fasteners will rust, causing streaks and premature failure, while wood is highly susceptible to subterranean termite damage.
Why is a concrete footing required for my fence posts in Downtown Fulton?
The 150 MPH V-ult wind load rating for Fulton mandates deep footings for stability. While the local frost line depth is 0 inches, the IRC requires posts to resist overturning. A proper concrete footing below grade anchors the structure against high-wind events common from the coast.
