Top Fencing Companies in Highlands, TX, 77562 | Compare & Call
There are 101 fencing companies server in Highlands TX
McBride Contracting is a full-service construction and contracting company based in Katy, TX, specializing in general contracting, fences and gates, and painting. We manage and coordinate projects of ...
Estimated Fencing Costs in Highlands, TX
Common Questions
What are the fence height and placement rules in Highlands?
Zoning limits are 4 feet in front yards and 8 feet in rear yards, with a 0-foot setback allowing installation on the property line. Corner lots must maintain a clear 'sight triangle' for driver visibility; this is critical for properties near I-10 access points.
How soon can a fencing crew start a project in Highlands Central?
After a site consultation. Our standard route from Highlands Elementary School via I-10 allows for a 35-45 minute response window. Scheduling accounts for the current average labor rate of $45/hour and material lead times.
What are the modern requirements for a pool fence or gate?
ISPSC 2021 / IBC 3109 requires self-closing, self-latching gates with latches 54 inches above grade. Integrating a smart gate IoT system meets this code while providing remote monitoring and audit logs, a growing trend for managing liability under Texas law.
Is a standard fence strong enough for Highlands wind?
No. The 135 MPH V-ult wind speed rating requires engineering. Post spacing must be reduced and brackets must be rated for high wind loads to survive peak storm season gusts, per ASCE 7-22 standards for this region.
What are the critical steps before digging fence post holes?
You must contact Texas811 at least two business days before excavation. Hitting a utility line in Highlands Central is a major liability. A professional will manage the Texas811 ticket and any required permit paperwork with the local office concurrently.
Do I need to notify my neighbor before building a fence?
Yes. Under Texas Property Code Chapter 247, you must provide written notice to adjoining property owners before replacing a shared boundary ('partition') fence. As of 2026, failure to provide this notice in Highlands can result in civil penalties and shared cost disputes.
What fence materials work best in Highlands soil?
With very heavy termite risk and moderate soil corrosivity, pressure-treated wood or composite materials are advised. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from corrosive soils, which are common here.
How deep should fence posts be set in Highlands, TX?
Posts require a 12-inch diameter concrete footing extending 6 inches below the local frost line. In the Highlands Central neighborhood, shallow footings above this depth will heave during winter freezes. IRC Section R403.1.4 mandates this for stability against frost action.
