Top Fencing Companies in Hondo, TX, 78861 | Compare & Call

First, file a locate request with Texas811 at least two business days before excavation. Hitting a utility line in Downtown Hondo incurs major repair costs and liability. Second, secure a permit from the Hondo permit office; we manage this paperwork to ensure code compliance.

Zoning limits are 3 feet in the front yard and 8 feet in the rear, with a 0-foot setback allowing construction on the property line. For corner lots, a clear 'sight triangle' is enforced at intersections to maintain driver visibility, a critical rule for properties near US Highway 90.

No. A 115 MPH V-ult wind load rating dictates engineering. Standard 8-foot post spacing often fails. For survivability through peak storm season, design requires 6-foot spacing, concrete footings, and wind-rated brackets to handle uplift forces on the fence panel.

Yes. Texas Property Code Chapter 247, as updated, requires written notice to adjoining property owners before altering a shared boundary. In Hondo, this 2026 good-neighbor law mandates notification for any fence replacement, repair, or new construction on the property line.

Posts require a 12-inch diameter concrete footing extending below the 6-inch frost line. The International Residential Code mandates this depth to prevent frost heave. In Downtown Hondo, posts set in shallower soil will lift and fail within one to two winter cycles.

We dispatch from the Medina County Courthouse area. Travel via US Highway 90 allows for a 15-20 minute response to most Downtown Hondo properties for an initial site assessment and project scoping.

Yes, but the primary latch must meet IBC/IRC Appendix AG. It must be self-closing and self-latching, with a minimum 48-inch height. A secondary IoT-enabled smart lock can be integrated, but it cannot compromise the primary mechanical latch, which is a Texas liability standard.

Use pressure-treated wood rated for ground contact and metal posts with a G90 galvanized coating. The moderate soil corrosivity index and moderate-to-heavy termite risk demand this compatibility. Stainless steel or polymer-coated fasteners prevent rust streaks on finished surfaces.