Top Fencing Companies in Horizon City, TX, 79928 | Compare & Call

There are 229 fencing companies server in Horizon City TX

Rubio's Welding Steel Erectors

Rubio's Welding Steel Erectors

Mabank TX 75147
Fences & Gates, Metal Fabricators

Rubio’s Welding & Steel Erectors, based in Mabank, TX, delivers high-quality welding and custom steel fabrication for homeowners and businesses around Cedar Creek Lake and along Highway 175. We specia...

Eminent Roofing

Eminent Roofing

★★★★★ 5.0 / 5 (1)
450 Century Pkwy Ste 250, Allen TX 75013
Roofing, Siding, Fences & Gates

Eminent Roofing has been serving Allen and the greater Plano area with comprehensive residential and commercial roofing, siding, fencing, and gate services. Their expertise extends to gutters, solar e...

S&B Roofing & Exteriors

S&B Roofing & Exteriors

★★★★★ 5.0 / 5 (1)
525 Keller Pkwy, Keller TX 76248
Roofing, Gutter Services, Fences & Gates

Since 2003, S&B Roofing & Exteriors has been a family-owned and faith-based company in Keller, TX, serving the DFW area. We provide roofing, gutter services, and fencing for both residential and comme...

LL Contracting

LL Contracting

Rowlett TX 75088
Landscaping, Fences & Gates, General Contractors

With 28 years of experience, LL Contracting in Rowlett, TX, is a family-run business that brings genuine care and craftsmanship to every project. We specialize in both interior and exterior home impro...

J’s Construction

J’s Construction

Rowlett TX 75089
Metal Fabricators, Fences & Gates

J’s Construction is a trusted metal fabrication and fence & gate company serving Rowlett, TX. Located near Lake Ray Hubbard and the Rowlett Creek Preserve, we understand the unique challenges local ho...

Structurescapes

Structurescapes

Rowlett TX 75089
Fences & Gates, Patio Coverings, Decks & Railing

Structurescapes serves Rowlett homeowners and businesses with expert fence, gate, deck, and patio covering installations. Located near Lake Ray Hubbard, we understand the local soil conditions that le...

JC Construction

JC Construction

Rowlett TX 75089
Electricians, Fences & Gates, Decks & Railing

JC Construction, a locally owned and operated business, has been serving the DFW area since 2014. Based in Rowlett, TX, we specialize in a comprehensive range of home improvement services including el...

Future Fence & Deck

Future Fence & Deck

★★★★★ 5.0 / 5 (1)
Heath TX 75032
Fences & Gates, Patio Coverings, Masonry/Concrete

Future Fence & Deck provides fencing, gates, patio covers, pergolas, and concrete services to homeowners and contractors in Heath, TX, and across North Texas. We handle wood and vinyl fencing, shade s...

Spring Creek Fence and Gate

Spring Creek Fence and Gate

★★☆☆☆ 1.5 / 5 (2)
Sachse TX 75048
Fences & Gates

Spring Creek Fence and Gate is a licensed fence and gate contractor serving Sachse and nearby cities. Our team specializes in custom designs using wood, steel, and wrought iron materials, focusing on ...

Tim Gregory Home Improvement

Tim Gregory Home Improvement

1075 Wisperwood, Rockwall TX 75087
Fences & Gates, General Contractors, Flooring

Tim Gregory Home Improvement in Rockwall, TX, specializes in bathroom remodeling, kitchen remodeling, and general remodeling, as well as fences and gates and flooring. Many homes in Rockwall face fenc...



Estimated Fencing Costs in Horizon City, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Horizon City. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

Why do fence posts in Horizon City Estates require deep concrete footings?

The local frost line depth is 12 inches. IRC 2018, Section 403.1.4.1 requires footings to extend below this line. If posts are set in shallow soil, seasonal frost heave will push them upward, causing the entire fence line to fail. Proper 30-inch deep footings provide stability against this cyclic freeze-thaw action.

How is my fence designed to withstand high winds from storms coming off I-10?

The design wind speed for structural calculations is 115 MPH V-ult, per ASCE 7-22 standards. This rating dictates post spacing, concrete pier diameter, and bracket strength. For a standard 8-foot panel, posts are typically spaced at 8 feet on center with 6x6 posts set in 12-inch diameter concrete footings to resist overturning moments from peak storm season gusts, which are channeled by the open terrain near the highway.

Which fencing materials are best for Horizon City's soil and pest conditions?

Material selection must address moderate soil corrosivity and moderate termite risk. Pressure-treated pine posts must use .60 retention treatment for ground contact. For metal posts and fasteners, hot-dip galvanized steel or aluminum is required to prevent rust streaks from corrosive soils. Avoid untreated wood in direct soil contact and specify stainless steel or polymer-coated screws to combat the corrosive environment.

How do modern gate systems meet both security and safety codes?

A secure perimeter now integrates smart technology with mandated safety features. For pools, IBC 2021 / IRC Appendix AG requires self-closing, self-latching gates with latches 54 inches above grade. Modern IoT gate systems meet this code while providing remote access logs and integration with home security. This combination addresses both liability standards for Texas homeowners and the moderate smart-gate trend for property access control.

What is the typical timeline and process to start a fencing project in Horizon City Estates?

After the initial consultation, we schedule a precise site survey. Our standard dispatch route from our yard near Coronado Park uses I-10 for efficient access, resulting in a 25-35 minute response window for site visits in your neighborhood. The project start date is set only after Texas811 marks are confirmed and the final permit is issued by the city, typically within 10-14 days of contract signing.

What is the critical first step before any digging for a fence project?

You must contact Texas811 at least two business days before excavation. Crews will mark all public underground utility lines. Hitting an unmarked gas, water, or fiber line in Horizon City Estates creates major liability for repair costs and service disruptions. As the contractor, we manage the Horizon City permit office paperwork concurrently, ensuring the project plot plan and engineering details are approved before the Texas811 marks expire.

What are the height and setback rules for fences in Horizon City, TX?

The zoning code enforces a 3-foot height limit in front yards and an 8-foot limit in rear yards. The setback regulation is 0 feet, allowing construction directly on the property line. Corner lots have additional 'sight triangle' requirements to maintain driver visibility; fencing material within 25 feet of the intersection of I-10 feeder roads and local streets must not exceed 3 feet in height.

What is my legal obligation to my neighbor before building a fence on our shared property line in Horizon City?

Texas Property Code Chapter 210, the 'Good Neighbor Fence Act', mandates specific notice and negotiation procedures for shared boundary fences. As of 2026, you must provide your adjoining neighbor in Horizon City with a written 'Notice of Intent to Replace a Boundary Fence' at least 30 days before construction begins. This law governs cost sharing and defines a 'partition fence'.



Scroll to Top
CALL US NOW