Top Fencing Companies in Horizon City, TX, 79928 | Compare & Call

There are 229 fencing companies server in Horizon City TX

Elyon Roofing Solutions

Elyon Roofing Solutions

★★★★★ 5.0 / 5 (1)
610 Uptown Blvd Ste 3600, Cedar Hill TX 75104
Damage Restoration, Roofing, Fences & Gates

Based in Cedar Hill, TX, Elyon Roofing Solutions provides damage restoration, roofing, and fencing services to local homeowners and businesses. Our team handles everything from storm damage repair and...

Feted Fence And Gate

Feted Fence And Gate

★★★★★ 5.0 / 5 (3)
Arlington TX 76015
Fences & Gates

Feted Fence And Gate LLC, based in Arlington, TX, was founded by Nicholas Lambott after he experienced the frustration of finding affordable, high-quality fence solutions for his own home. As a family...

Heirloom Roofing & Restorations

Heirloom Roofing & Restorations

★★★★★ 5.0 / 5 (1)
Sherman TX 75092
Roofing, Fences & Gates, General Contractors

Heirloom Roofing & Restorations, based in Sherman, TX, is an A+ BBB-accredited company with over five years of experience serving Texas and Oklahoma. We specialize in residential and commercial projec...

J & J Gates Service And Design

J & J Gates Service And Design

★★★★☆ 4.3 / 5 (7)
Fort Worth TX 76116
Garage Door Services, Fences & Gates

J & J Gates Service And Design is a family-owned and operated business serving Fort Worth, TX, with over 12 years of experience in custom gate design, installation, and repair. We specialize in both r...

Griffin Fence And Construction

Griffin Fence And Construction

★★★★★ 5.0 / 5 (1)
Denton TX 76209
Fences & Gates, Patio Coverings, General Contractors

Griffin Fence And Construction serves homeowners and businesses in Denton, TX, offering a full range of services from fencing and gates to patio coverings and general contracting. The company frequent...

Rustic Fence & Steel

Rustic Fence & Steel

★★★☆☆ 3.4 / 5 (20)
500 N Bowen Rd, Arlington TX 76012
Fences & Gates

Rustic Fence & Steel, a family-owned business since 1964, manufactures and installs fences and gates for residential and commercial clients in Arlington and across Texas. Founded by Derick D. South, a...

Dytek Repairs Service and Solutions

Dytek Repairs Service and Solutions

Garland TX 75041
Mobile Home Repair, Fences & Gates, General Contractors

Dytek Repairs Service and Solutions provides residential and commercial fence, gate, mobile home, and general contracting services in Garland, TX, and throughout the greater DFW area. The company hand...

Texas Openers

Texas Openers

★★★★★ 5.0 / 5 (2)
Mineral Wells TX 76067
Fences & Gates, Decks & Railing

Texas Openers is your trusted local expert for fences, gates, decks, and railing in Mineral Wells, TX. We understand the unique challenges that Mineral Wells homeowners face—like sun-faded fence stain...

Cedarwood Gates & Garage Doors

Cedarwood Gates & Garage Doors

★★★☆☆ 3.0 / 5 (2)
Arlington TX 76010
Fences & Gates, Garage Door Services

Cedarwood Gates & Garage Doors, under owner Andrew Burke since 2012, has become the neighborly choice for Arlington residents needing reliable garage door and gate services. What started after Burke f...

Capital Welding Works

Capital Welding Works

★★★★★ 5.0 / 5 (3)
Irving TX 75062
Fences & Gates, Metal Fabricators

Capital Welding Works is a steel and metal fabrication company serving Irving, TX, and the surrounding areas. We handle both commercial and residential projects, from quick repairs to full-scale custo...



Estimated Fencing Costs in Horizon City, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Horizon City. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

Why do fence posts in Horizon City Estates require deep concrete footings?

The local frost line depth is 12 inches. IRC 2018, Section 403.1.4.1 requires footings to extend below this line. If posts are set in shallow soil, seasonal frost heave will push them upward, causing the entire fence line to fail. Proper 30-inch deep footings provide stability against this cyclic freeze-thaw action.

How is my fence designed to withstand high winds from storms coming off I-10?

The design wind speed for structural calculations is 115 MPH V-ult, per ASCE 7-22 standards. This rating dictates post spacing, concrete pier diameter, and bracket strength. For a standard 8-foot panel, posts are typically spaced at 8 feet on center with 6x6 posts set in 12-inch diameter concrete footings to resist overturning moments from peak storm season gusts, which are channeled by the open terrain near the highway.

Which fencing materials are best for Horizon City's soil and pest conditions?

Material selection must address moderate soil corrosivity and moderate termite risk. Pressure-treated pine posts must use .60 retention treatment for ground contact. For metal posts and fasteners, hot-dip galvanized steel or aluminum is required to prevent rust streaks from corrosive soils. Avoid untreated wood in direct soil contact and specify stainless steel or polymer-coated screws to combat the corrosive environment.

How do modern gate systems meet both security and safety codes?

A secure perimeter now integrates smart technology with mandated safety features. For pools, IBC 2021 / IRC Appendix AG requires self-closing, self-latching gates with latches 54 inches above grade. Modern IoT gate systems meet this code while providing remote access logs and integration with home security. This combination addresses both liability standards for Texas homeowners and the moderate smart-gate trend for property access control.

What is the typical timeline and process to start a fencing project in Horizon City Estates?

After the initial consultation, we schedule a precise site survey. Our standard dispatch route from our yard near Coronado Park uses I-10 for efficient access, resulting in a 25-35 minute response window for site visits in your neighborhood. The project start date is set only after Texas811 marks are confirmed and the final permit is issued by the city, typically within 10-14 days of contract signing.

What is the critical first step before any digging for a fence project?

You must contact Texas811 at least two business days before excavation. Crews will mark all public underground utility lines. Hitting an unmarked gas, water, or fiber line in Horizon City Estates creates major liability for repair costs and service disruptions. As the contractor, we manage the Horizon City permit office paperwork concurrently, ensuring the project plot plan and engineering details are approved before the Texas811 marks expire.

What are the height and setback rules for fences in Horizon City, TX?

The zoning code enforces a 3-foot height limit in front yards and an 8-foot limit in rear yards. The setback regulation is 0 feet, allowing construction directly on the property line. Corner lots have additional 'sight triangle' requirements to maintain driver visibility; fencing material within 25 feet of the intersection of I-10 feeder roads and local streets must not exceed 3 feet in height.

What is my legal obligation to my neighbor before building a fence on our shared property line in Horizon City?

Texas Property Code Chapter 210, the 'Good Neighbor Fence Act', mandates specific notice and negotiation procedures for shared boundary fences. As of 2026, you must provide your adjoining neighbor in Horizon City with a written 'Notice of Intent to Replace a Boundary Fence' at least 30 days before construction begins. This law governs cost sharing and defines a 'partition fence'.



Scroll to Top
CALL US NOW