Top Fencing Companies in Horizon City, TX, 79928 | Compare & Call

There are 229 fencing companies server in Horizon City TX

Sunnyvale Fence & Ironworks

Sunnyvale Fence & Ironworks

★☆☆☆☆ 1.0 / 5 (17)
Forney TX 75126
General Contractors, Fences & Gates

Sunnyvale Fence & Ironworks, established in 1965, is a full-service fence and general contracting company serving Forney, TX, and the greater Dallas-Fort Worth area. Led by Terry Shupp, who took the h...

5 Star Fences

5 Star Fences

Garland TX 75044
Fences & Gates

5 Star Fences, founded in Dallas by two brothers, serves Garland residents with reliable fence and gate services. The company focuses on enhancing home security and curb appeal through wooden fence in...

Fairway Greens

Fairway Greens

Garland TX 75043
General Contractors, Decks & Railing, Fences & Gates

Fairway Greens has been serving Garland homeowners since 1991, starting as an exterior construction company specializing in fences, decks, outdoor kitchens, stonework, siding, and painting. After grow...

Texas Land Keepers

Texas Land Keepers

★★★★★ 4.9 / 5 (7)
4641 Lasater Rd, Mesquite TX 75181
Fences & Gates, Tree Services, Decks & Railing

Texas Land Keepers, based in Mesquite, TX, has served the Dallas area since 2015 with a focus on fences, gates, and tree services. Growing up on farms, the team brings a hands-on understanding of natu...

G Hernandez Lawn and Tree Service

G Hernandez Lawn and Tree Service

2177 Evergreen St, Garland TX 75041
Lawn Services, Tree Services, Fences & Gates

G Hernandez Lawn and Tree Service has been serving Garland, TX, homeowners with practical and reliable outdoor solutions. Our team brings years of hands-on experience to every job, focusing on lawn ca...

Noah's Arc Welding & Machine Shop

Noah's Arc Welding & Machine Shop

★★★★★ 5.0 / 5 (1)
Royse City TX 75189
Metal Fabricators, Fences & Gates, Art Installation

Noah's Arc Welding & Machine Shop in Royse City, TX, is a father-son operation born from a retired airline welder’s desire to stay busy. After 30 years with Gulfstream Aerospace and high-clearance gov...

Easton Fencing

Easton Fencing

★★★★☆ 3.5 / 5 (16)
2175 Lake Estates Dr, Rockwall TX 75032
Fences & Gates, Patio Coverings

Founded in 2009 by Justin Henderson, Easton Fencing is a family-operated company serving Rockwall, TX, and surrounding areas. We specialize in cedar and wrought iron fencing, offering installation, re...

Good Fence Company

Good Fence Company

Dallas TX 75211
Fences & Gates

Good Fence Company has been serving the Dallas-Fort Worth area for the past 10 years, specializing in wooden fences and sliding gates. Based in Dallas, TX, we offer installation, repair, and weatherpr...

The Fence Gurus of Texas

The Fence Gurus of Texas

★★★★★ 5.0 / 5 (1)
Dallas TX 75236
Fences & Gates

The Fence Gurus of Texas serves homeowners and businesses across Dallas, from the historic streets of Deep Ellum to the lakefront properties near White Rock Lake. Specializing in fence and gate instal...

Red White and Roofing

Red White and Roofing

★★★★★ 5.0 / 5 (5)
Midlothian TX 76065
Fences & Gates, Gutter Services, Roofing

Red White and Roofing, a veteran-owned company established in 2016, provides reliable residential and commercial roofing services to Midlothian and the Dallas-Fort Worth area. Founded on principles of...



Estimated Fencing Costs in Horizon City, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Horizon City. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

Why do fence posts in Horizon City Estates require deep concrete footings?

The local frost line depth is 12 inches. IRC 2018, Section 403.1.4.1 requires footings to extend below this line. If posts are set in shallow soil, seasonal frost heave will push them upward, causing the entire fence line to fail. Proper 30-inch deep footings provide stability against this cyclic freeze-thaw action.

How is my fence designed to withstand high winds from storms coming off I-10?

The design wind speed for structural calculations is 115 MPH V-ult, per ASCE 7-22 standards. This rating dictates post spacing, concrete pier diameter, and bracket strength. For a standard 8-foot panel, posts are typically spaced at 8 feet on center with 6x6 posts set in 12-inch diameter concrete footings to resist overturning moments from peak storm season gusts, which are channeled by the open terrain near the highway.

Which fencing materials are best for Horizon City's soil and pest conditions?

Material selection must address moderate soil corrosivity and moderate termite risk. Pressure-treated pine posts must use .60 retention treatment for ground contact. For metal posts and fasteners, hot-dip galvanized steel or aluminum is required to prevent rust streaks from corrosive soils. Avoid untreated wood in direct soil contact and specify stainless steel or polymer-coated screws to combat the corrosive environment.

How do modern gate systems meet both security and safety codes?

A secure perimeter now integrates smart technology with mandated safety features. For pools, IBC 2021 / IRC Appendix AG requires self-closing, self-latching gates with latches 54 inches above grade. Modern IoT gate systems meet this code while providing remote access logs and integration with home security. This combination addresses both liability standards for Texas homeowners and the moderate smart-gate trend for property access control.

What is the typical timeline and process to start a fencing project in Horizon City Estates?

After the initial consultation, we schedule a precise site survey. Our standard dispatch route from our yard near Coronado Park uses I-10 for efficient access, resulting in a 25-35 minute response window for site visits in your neighborhood. The project start date is set only after Texas811 marks are confirmed and the final permit is issued by the city, typically within 10-14 days of contract signing.

What is the critical first step before any digging for a fence project?

You must contact Texas811 at least two business days before excavation. Crews will mark all public underground utility lines. Hitting an unmarked gas, water, or fiber line in Horizon City Estates creates major liability for repair costs and service disruptions. As the contractor, we manage the Horizon City permit office paperwork concurrently, ensuring the project plot plan and engineering details are approved before the Texas811 marks expire.

What are the height and setback rules for fences in Horizon City, TX?

The zoning code enforces a 3-foot height limit in front yards and an 8-foot limit in rear yards. The setback regulation is 0 feet, allowing construction directly on the property line. Corner lots have additional 'sight triangle' requirements to maintain driver visibility; fencing material within 25 feet of the intersection of I-10 feeder roads and local streets must not exceed 3 feet in height.

What is my legal obligation to my neighbor before building a fence on our shared property line in Horizon City?

Texas Property Code Chapter 210, the 'Good Neighbor Fence Act', mandates specific notice and negotiation procedures for shared boundary fences. As of 2026, you must provide your adjoining neighbor in Horizon City with a written 'Notice of Intent to Replace a Boundary Fence' at least 30 days before construction begins. This law governs cost sharing and defines a 'partition fence'.



Scroll to Top
CALL US NOW