Top Fencing Companies in Hudson Bend, TX, 78734 | Compare & Call

Hudson Bend Fencing Company

Hudson Bend Fencing Company

Hudson Bend, TX
Fencing Company

Phone : 888-524-1778

Hudson Bend Fencing Company helps property owners in Hudson Bend, state-short improve privacy, safety, and property value with professionally installed fencing.
FEATURED

There are 11 fencing companies server in Hudson Bend TX

Keller Fence Company

Keller Fence Company

800 Blue Mound Rd, Haslet TX 76052
Fences & Gates

Since 1964, Keller Fence Company has been the original fence company in Keller, Texas, now serving Haslet and all of Tarrant County as a third-generation family business. We specialize in fence and ga...

HL Welding Worx

HL Welding Worx

★☆☆☆☆ 1.0 / 5 (1)
Azle TX 76020
Farm Equipment Repair, Fences & Gates, Metal Fabricators

HL Welding Worx is a trusted farm equipment repair, fence and gate installation, and metal fabrication company serving Azle, TX, and the surrounding areas. Located just off Highway 199 near the Azle M...

Eight Point Construction

Eight Point Construction

Decatur TX 76234
Fences & Gates

Eight Point Construction in Decatur, TX has been specializing in fencing since 2015. As a locally owned and operated business, we provide quality fencing solutions for homes and properties throughout ...

Roye’s Fence&Welding

Roye’s Fence&Welding

Valley View TX 76272
Fences & Gates, Decks & Railing, Metal Fabricators

Roye’s Fence & Welding, based in Valley View, TX, is your local expert for fences, gates, decks, and custom metal fabrication. Located just off Highway 82 near the Valley View High School, the team sp...

Aaron's Service Group

Aaron's Service Group

★★★★★ 5.0 / 5 (1)
3504 E University Dr, Denton TX 76208
General Contractors, Fences & Gates, Decks & Railing

Aaron's Service Group is a father-son owned and operated business that has been serving Denton, TX since 1979. We are a team of husbands, dads, veterans, and school teachers who take pride in our comm...

Mustang Mine Professionals

Mustang Mine Professionals

★★★★★ 5.0 / 5 (1)
1278 FM 3077, Bellevue TX 76228
Metal Fabricators, Fences & Gates, Signmaking

Mustang Mine Professionals, based in Bellevue, TX, is a family-owned business specializing in metal fabrication, fence and gate installation, repair, and signmaking. Owner John Scott brings over 30 ye...

HB Services

HB Services

Springtown TX 76082
Garage Door Services, Fences & Gates

HB Services is a trusted provider of garage door, fence, and gate solutions in Springtown, TX. Located just off Highway 199 near the historic Springtown Square, the company serves homeowners throughou...

New Ranch Construction

New Ranch Construction

Bridgeport TX 76426
Fences & Gates, Masonry/Concrete, General Contractors

New Ranch Construction serves homeowners in Bridgeport, TX, specializing in fences, gates, masonry, and concrete work. Many local fences suffer from heat-related warping and discoloration, issues comm...

Telion Construction

Telion Construction

Haslet TX 76052
General Contractors, Painters, Fences & Gates

Telion Construction, LLC, owned by lifelong Texan Elisha Ruth Epperley, delivers residential and commercial construction services throughout Haslet and the greater DFW area. Established in 2019, the c...

Superior Lawn Services

Superior Lawn Services

Bowie TX 76230
Lawn Services, Fences & Gates, Irrigation

Superior Lawn Services is a trusted provider of lawn care, fencing, and irrigation solutions for homeowners in Bowie, TX. Living in the Texas heat, many local fences face sun-faded staining and cracki...

« PreviousPage 1 of 2Next Page »


Estimated Fencing Costs in Hudson Bend, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Hudson Bend. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

What are the height and setback rules for fences in Hudson Bend, TX?

Hudson Bend zoning limits fences to 4 feet in front yards and 8 feet in rear and side yards. The standard setback is 0 feet, allowing construction directly on the property line. For corner lots, visibility 'sight triangles' at intersections are critical, especially near high-traffic corridors like TX-71. Fences cannot obstruct driver sightlines in these zones.

How do frost depths in Hudson Bend affect fence footings?

Hudson Bend has a 6-inch frost line depth. The International Residential Code (IRC) requires fence post footings to extend below this line. Posts set in shallow footings within Hudson Bend Estates will heave upward during winter freezes, causing structural failure. Proper below-frost-line concrete footings prevent this movement and ensure long-term stability.

How do soil conditions and pests in Hudson Bend influence material choice?

Hudson Bend has moderate soil corrosivity and a moderate to heavy termite risk. These factors dictate material compatibility. Use pressure-treated lumber rated for ground contact and corrosion-resistant fasteners like hot-dip galvanized or stainless steel to prevent rust streaks. Avoid untreated wood in direct soil contact and consider metal posts or composite materials in high-risk zones.

What is your typical timeline and route for a consultation in Hudson Bend?

We schedule consultations within one week. Our standard route from Mansfield Dam Park uses TX-71 for direct access, resulting in a 35-45 minute travel time to most Hudson Bend Estates properties. We confirm the appointment 24 hours in advance and arrive with site-specific zoning maps and preliminary wind load calculations for your review.

Do smart gates meet pool fence and liability codes?

Yes. The 2021 International Swimming Pool and Spa Code (ISPSC), adopted under Austin Code Chapter 25-2, requires pool barriers with self-closing, self-latching gates. Modern IoT smart gates integrate these features with access logs and remote monitoring. This integrated approach meets the code and provides a superior liability defense for Texas homeowners by demonstrating proactive safety management.

How does the local 115 MPH V-ult wind speed rating change fence design?

The 115 MPH ultimate design wind speed (V-ult) is a key engineering parameter from ASCE 7-22 standards. This rating dictates structural requirements to survive peak storm season gusts. It forces closer post spacing (often 6-8 feet on center), deeper footings, and the use of heavy-duty wind-rated brackets. Standard residential fence designs often fail under these loads without proper engineering.

What is the utility locate and permitting process for a new fence?

State law requires a Texas 811 utility locate request before any excavation. Hitting a gas, electric, or fiber line in Hudson Bend Estates creates major liability and repair costs. After locates are marked, you must secure a permit from the local jurisdiction. We manage this paperwork with the permit office to ensure the project meets all zoning and safety codes before work begins.

What are my legal duties to neighbors when building a fence on the property line?

Texas Property Code Chapter 247 (the 'Good Neighbor Fence Act') governs shared boundaries. For 2026, the law requires written notice to adjoining landowners in Hudson Bend before replacing or building a fence on a shared line. This prevents disputes and establishes cost-sharing rights. Failure to provide notice can affect your ability to recover costs.



Scroll to Top
CALL US NOW