Top Fencing Companies in Keene, TX, 76009 | Compare & Call
There are 54 fencing companies server in Keene TX
Lubbock Repair Partners is a veteran-owned, woman-owned, and family-operated handyman service based in Lubbock, TX. With over 20 years of combined experience, we offer a comprehensive range of home re...
Garcia's Handyman Services, owned by Danny Garcia, has been serving Lubbock, TX, for over 30 years. We specialize in handyman repairs, painting (interior/exterior), fence and gate installation and rep...
Best Value Fencing And Home Services is a Lubbock-based remodeling contractor led by Greg, who brings over 25 years of experience from his career as an industrial engineer with companies like Milliken...
Mountain Movers Landscape Fence & Tree has been a family-owned staple in Lubbock since 2004, built on the principle that faith the size of a mustard seed can move mountains. We specialize in tree trim...
Dan The Handyman serves homeowners in Shallowater, TX, offering reliable solutions for fence and gate issues common to the area. With the intense West Texas sun, fence cracking from heat exposure is a...
Dayton Nolan, a Lubbock native, built Montford Garage Doors & Gates on years of hands-on experience and a commitment to honest, dependable work. Since 2013, the company has served homeowners and busin...
Hub City Home Services, based in Lubbock, TX, helps homeowners cross off their to-do lists with handyman, general contracting, and fencing services. Whether it’s assembling new furniture, caulking win...
Hub City Fence Staining, owned by Jadon Sessums, has been serving Lubbock, TX, since 2017 as a dedicated fence contractor and deck builder. We specialize in residential and commercial staining, offeri...
Tekton Construction Solutions
Tekton Construction Solutions is a Lubbock-based general contractor founded by partners with over 18 years of combined experience. After years of working for others, they started their own company to ...
ABA Fence Stain is a local fence and gate expert serving Lubbock, TX. They specialize in installation, repair, painting, staining, and weatherproofing for both fences and automatic or manual gates. Lu...
Estimated Fencing Costs in Keene, TX
Common Questions
How deep should fence posts be set in Keene, TX?
Set posts below the 6-inch frost line. The International Residential Code (IRC) requires footings to resist frost heave. Posts in Old Town Keene that stop above this depth will lift from freeze-thaw cycles, causing racking and failure.
Are smart gates and latches a good security upgrade?
Integrated IoT latches align with modern liability standards. For pools, they satisfy the automatic closing requirements of the International Swimming Pool and Spa Code (Appendix AG). In Keene, low-moderate smart gate adoption reflects a trend toward documented, code-compliant access control.
How soon can a consultation be scheduled?
A structural review can be dispatched within 48 hours. The standard route from Keene City Hall uses US-67 for direct access, resulting in a 25-35 minute response time for most addresses in Old Town Keene.
Am I required to notify my neighbor before building a fence on our property line?
Yes. Texas Property Code Chapter 756 mandates notification before altering a shared boundary fence. Since 2026, Keene also requires written notice to adjoining property owners for any partition fence replacement, confirming the 'good neighbor' intent of the law.
What is required before digging fence post holes?
You must call Texas811 for a utility locate. Hitting a gas or fiber line in Old Town Keene creates major liability and repair costs. The process also includes securing a permit from the Keene permit office, which coordinates the locate ticket with your project address.
What are the height and placement rules for fences in Keene?
Zoning limits are 4 feet in front yards and 8 feet in rear yards. The 0-foot setback allows building directly on the property line. Corner lots near US-67 must maintain clear 'sight triangles' at intersections—no solid fences within 10 feet of the curb for traffic visibility.
What fencing materials hold up best in Keene's soil?
Material compatibility is critical. The moderate soil corrosivity index demands hot-dip galvanized or stainless steel fasteners to prevent rust streaks. With a moderate to heavy termite risk, pressure-treated wood or non-organic composites are necessary for any structural wood components.
Is a standard fence strong enough for Keene's wind?
No. A 115 MPH V-ult wind speed dictates engineering. Post spacing must tighten and bracket strength must meet ASCE 7-22 standards to survive peak storm season gusts. A generic design will fail under the wind exposure common near open corridors along US-67.
