Top Fencing Companies in Kemp, TX, 75143 | Compare & Call

There are 91 fencing companies server in Kemp TX

Add-A-Gate

Add-A-Gate

3204 S Sugar Rd, Edinburg TX 78539
Fences & Gates

For homeowners and property managers in Edinburg, McAllen, and throughout the Rio Grande Valley, Add-A-Gate provides custom gate fabrication and installation services tailored to the unique needs of S...

A & J Fencing

A & J Fencing

★★★★★ 5.0 / 5 (1)
Edinburg TX 78542
Fences & Gates

A & J Fencing provides expert fence and gate services to homeowners and businesses in Edinburg, TX. The area's clay-rich soil expands and contracts with moisture changes, often causing fence posts to ...

Jc Clearing

Jc Clearing

Rio Grande City TX 78582
Septic Services, Fences & Gates, Metal Fabricators

Jc Clearing provides practical, reliable services for residents and businesses in Rio Grande City, TX. Specializing in septic systems, fencing, gates, and metal fabrication, they tackle common local p...

Luis M Mendoza

Luis M Mendoza

Pharr TX 78577
Fences & Gates, Metal Fabricators

Luis M Mendoza is a trusted local fence and gate specialist serving Pharr, TX and the surrounding areas. Located near the Pharr-Reynosa International Bridge and close to the Pharr Sports Complex, the ...

A&A Remodeling & Renovations

A&A Remodeling & Renovations

McAllen TX 78501
General Contractors, Fences & Gates

A&A Remodeling & Renovations is a trusted general contractor and fence specialist serving homeowners across McAllen, TX. Located just off 10th Street near the McAllen Convention Center, the company ad...

Classic Design

Classic Design

824 E Daffodil Ave Ste 1, McAllen TX 78501
Patio Coverings, Fences & Gates, Decks & Railing

Classic Design is a trusted local contractor serving McAllen, TX, specializing in patio coverings, fences & gates, decks & railing. Many McAllen homes face fencing issues like sun-faded staining and f...

Orangewood Gates & Garage Doors

Orangewood Gates & Garage Doors

Pharr TX 78577
Fences & Gates, Garage Door Services

Sam Lewis founded Orangewood Gates & Garage Doors in 2013, bringing years of hands-on experience with garage doors and access systems across the McAllen area. Based in Pharr, TX, the company has built...

New Millennium Fence

New Millennium Fence

111 W Thelma St, San Juan TX 78577
Fences & Gates

New Millennium Fence has been serving San Juan and the Rio Grande Valley for over 25 years. We specialize in residential and commercial fencing, offering a range of materials including treated wood, c...

Fishing To Fix

Fishing To Fix

Edinburg TX 78539
Handyman, Fences & Gates, Flooring

Located in Edinburg, TX, Fishing To Fix provides reliable handyman services, fencing, and flooring solutions. Known for addressing common local issues like rusted metal fence hardware and wind-related...

Rgv welding solutions

Rgv welding solutions

Alton TX 78573
Fences & Gates

RGV Welding Solutions, based in Alton, TX, specializes in repairing and reinforcing residential and commercial fences and gates. We frequently address common local problems like gate sagging and fence...



Estimated Fencing Costs in Kemp, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Kemp. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Frequently Asked Questions

Am I legally required to notify my neighbor before building a fence?

Yes, for any fence replacing a shared boundary. Texas Property Code Chapter 123, the 'good neighbor' law, requires written notice to adjoining landowners. As of 2026, the City of Kemp also requires proof of this notification for any permit application involving a partition fence. This allows for a formal objection period and prevents disputes over property line encroachment.

What are the modern requirements for a pool fence gate?

The IBC/IRC International Swimming Pool and Spa Code mandates self-closing, self-latching gates that open outward. The latch must be 54 inches above the deck or on the poolside of the gate. A 2026 trend is integrating IoT smart latches that send alerts to a homeowner's phone if the gate is ajar, creating an audit trail. This integration meets evolving liability standards in Texas by demonstrating proactive safety management.

Why do fence posts need to be set so deep in the ground?

Footing stability in Kemp City Center requires posts set below the 6-inch frost line. When soil freezes, it expands upward, a process called frost heave. Posts installed above this depth can be lifted, causing structural failure. The 2021 IRC mandates this depth to prevent heave. In your neighborhood's moderate soil, concrete footings must also resist this uplift force to maintain the fence's alignment.

What are the required steps before you dig the first post hole?

The mandatory first step is calling Texas 811 at least two business days before excavation. Hitting a buried utility line in Kemp City Center is a major liability for repair costs and service disruption. We manage the City permit office paperwork, submitting the 811 clearance ticket, a site plan, and the neighbor notification affidavit. This ensures the project starts with full legal and safety compliance, preventing costly work stoppages.

How do I choose materials that will last in this area?

Material compatibility is critical. Kemp has a moderate soil corrosivity index and a moderate to heavy termite risk. Pressure-treated pine is standard, but the treatment must be ground-contact rated. For metal posts, use hot-dip galvanized steel. All fasteners must be stainless steel or triple-coated to prevent rust streaks. Vinyl or composite materials offer high resistance to both corrosion and insect damage in this environment.

What are the height and placement rules for my fence?

City zoning limits front yard fences to 4 feet and rear fences to 8 feet. The 0-foot setback allows installation directly on your property line. A critical exception is the 'sight triangle' for corner lots. Near US-175, a clear visibility zone, typically 10 feet from the property corner, is enforced. Any fence in this triangle must be under 3 feet tall to maintain driver sightlines and comply with traffic safety ordinances.

How soon can you start a project and what is the consultation process?

We typically schedule consultations within 5 business days. For Kemp City Center, our specialist routes from Kemp City Park via US-175. This allows for a 45-60 minute on-site consultation to assess your lot's specific wind exposure, soil conditions, and zoning context. We then provide a firm quote and a projected start date, which factors in current material lead times and the permit approval window from the city.

Is my fence designed to withstand high winds?

Kemp's design wind speed is 115 MPH V-ult. This ultimate wind load, per ASCE 7-22 standards, dictates structural requirements. To survive peak storm season gusts, post spacing must be reduced (often to 6-foot centers), concrete footings enlarged, and all brackets must be rated for high-wind applications. A standard 4x4 post is insufficient; engineered 6x6 posts or steel posts are often required to resist the overturning moment from these loads.



Scroll to Top
CALL US NOW