Top Fencing Companies in Kerens, TX, 75144 | Compare & Call

There are 14 fencing companies server in Kerens TX

Moreland Fence

Moreland Fence

1405 County Rd 2307, Sulphur Springs TX 75482
Fences & Gates

Moreland Fence, owned by Terry Moreland, has been serving Sulphur Springs, TX, since 1997. What started as a part-time endeavor has grown into a full-time commitment to building and repairing fences a...

Cavemen Construction and Demolition

Cavemen Construction and Demolition

Paris TX 75460
General Contractors, Fences & Gates, Demolition Services

Cavemen Construction and Demolition is a trusted general contractor serving Paris, TX, and the surrounding area. We specialize in a wide range of services, including bathroom and kitchen remodeling, n...

Stone Painting

Stone Painting

Reno TX 75462
Fences & Gates, Painters, Pressure Washers

Stone Painting in Reno, TX, specializes in exterior house painting, trim and detail work, deck and fence staining, pressure washing for prep, and custom color consultations. Our team understands that ...

Wrights Fencing & Clearing

Wrights Fencing & Clearing

8116 Fm 1499, Sumner TX 75486
Fences & Gates, Tree Services

Wrights Fencing & Clearing, based in Sumner, TX, approaches fencing and land work as a craft rather than just a transaction. We specialize in building and repairing 5-strand wire fences at $5 per foot...

« Previous PagePage 2 of 2Next »


Estimated Fencing Costs in Kerens, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Kerens. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

How soon can a fencing contractor start a project in Downtown Kerens?

A structural consultation can typically be scheduled within 48 hours. Our standard route from Kerens City Hall uses US Highway 287 for efficient access, resulting in a 15-20 minute response time for site assessments in the downtown area. Project start dates depend on material lead times and the completion of the Texas811 and permitting process.

How is a fence engineered to withstand the 115 MPH wind loads in Kerens?

The 115 MPH V-ult wind speed rating dictates structural design per ASCE 7-22 standards. This requires reduced post spacing (often 6 feet on-center maximum), embedded post depth of 30 inches minimum, and wind-rated concrete footings. Brackets must be galvanized and rated for high uplift. This engineering prevents failure during peak storm season gusts common from the Gulf.

What fence material is best for Kerens given the soil and termite risk?

With moderate soil corrosivity and moderate-to-heavy termite risk, material compatibility is critical. Pressure-treated Southern Yellow Pine posts with UC4B treatment are standard. Use stainless steel or hot-dipped galvanized fasteners to prevent rust streaks from corrosive soils. Avoid untreated wood in direct ground contact and consider composite materials for low-maintenance sections.

Am I legally required to notify my neighbor before building a fence on the property line?

Yes. Under Texas Property Code Chapter 247, you must provide written notice to adjoining landowners for any fence constituting a 'partition fence' on a shared boundary. In Kerens, 2026 interpretations require this notification before material delivery. Failure to comply can result in shared cost disputes and legal delays.

What are the height and setback rules for a fence on my Kerens property?

Kerens zoning enforces a 4-foot height limit in front yards and 8 feet in rear yards. The standard setback is 0 feet, allowing construction directly on the property line. For corner lots, especially near US Highway 287, you must maintain a clear 'sight triangle' at intersections—typically a 10-foot area from the property corner where fences cannot exceed 3 feet to ensure driver visibility.

What is the utility locate process before digging fence post holes?

State law requires a Texas811 ticket at least two business days before excavation. In Downtown Kerens, hitting a gas, water, or fiber line is a major liability. The service marks public lines; private lines from the meter to the house are the owner's responsibility. We manage the Kerens permit office paperwork concurrently to ensure the project starts without legal delay.

How deep do fence posts need to be in Kerens to prevent frost heave?

Posts require a minimum 6-inch footing below the local frost line. In Downtown Kerens, shallow footings above this depth will fail as seasonal freeze-thaw cycles create lift. IRC Table R301.2(1) mandates this for structural stability against frost jacking. A 6x6 post in moderate soil needs a concrete pier extending below this plane.

Do smart gates or electronic latches meet Texas pool code requirements?

Yes, when integrated correctly. IRC Appendix AG (ISPSC) requires pool barriers to have self-closing, self-latching gates. An IoT-enabled smart gate must default to a locked state upon closure and have manual override. In Texas, combining this technology with a certified alarm provides a higher liability standard, though adoption in Kerens remains low.



Scroll to Top
CALL US NOW