Top Fencing Companies in Lumberton, TX, 77625 | Compare & Call
There are 237 fencing companies server in Lumberton TX
GT Landscaping, based in Cedar Creek, TX, provides lawn care, fence and gate installation, repair, painting, and staining, as well as tree care and removal. The team combines welding expertise with ge...
Proattention Home and Commercial Services
Proattention Home and Commercial Services serves Austin, TX, providing expert lawn care, tree care, and fence and gate solutions. Local homeowners near Zilker Park, Mueller, and South Congress often f...
JEG Lawn & Landscaping is your trusted local expert for fences, gates, and metal fabrication in Austin, TX. We help homeowners tackle common issues like gate latches that break from frequent use and f...
J and R Lawn Services is a full-service landscaping, fencing, and masonry contractor based in Pflugerville, TX. We help local homeowners address common issues like hail-damaged fences and gate alignme...
Red Hot Welding Works is a licensed metal fabrication service in Elgin, TX, that started in a home garage. Today, we operate from a full fabrication shop equipped with CNC plasma cutting and welding e...
Most Wanted Landscapes
Most Wanted Landscapes has been a trusted name in Kyle, TX for over a decade, specializing in fences & gates, tree services, and masonry/concrete work. Our team understands the unique challenges of th...
S&D General Contracting in Giddings, TX, specializes in residential remodeling, deck construction, and fence services. Our trained team prioritizes trustworthy, reliable solutions for bathroom, kitche...
Camden's Revolution Construction, based in Austin, TX, specializes in general contracting, landscaping, and fence and gate installation. Austin's intense heat often causes wooden fences to crack and o...
The Other Side Fence And Yard serves Pflugerville, TX, tackling common local fencing issues like discoloration and chain link corrosion. Whether near Stone Hill Town Center or in neighborhoods like Fa...
Lopez Painting and Welding is a family-owned and operated business based in Austin, TX, with over 20 years of experience in home improvement. We specialize in interior and exterior painting, welding, ...
Estimated Fencing Costs in Lumberton, TX
Common Questions
Do I have to tell my neighbor in Lumberton if I replace our shared fence?
Yes. Texas Property Code Chapter 247, the 'Good Neighbor Fence Law,' requires written notice to adjoining landowners before replacing a boundary or partition fence. For 2026 projects, providing this notice is a legal prerequisite to establishing cost-sharing or addressing disputes over the new structure. Failure to notify can forfeit certain legal rights.
What are the height and placement rules for a fence on my Lumberton property?
Lumberton zoning limits fence heights to 4 feet in front yards and 8 feet in rear yards. A 0-foot setback allows installation directly on your property line. Critical for corner lots: you must maintain a clear 'sight triangle' at intersections for driver visibility, especially near high-traffic corridors like US-69. Violating this can result in a city-ordered removal.
Why do fence posts in Village Creek need to be set so deep?
Lumberton has a 12-inch frost line. When soil freezes, it can heave upwards, lifting shallow posts out of alignment. The IRC requires posts to be set at or below the local frost line depth to prevent structural failure from frost heave. Posts not set to this standard in the Village Creek area will likely tilt or fail within a few seasons.
What fence materials hold up best against Lumberton's termites and soil?
Given the Very Heavy termite risk and Moderate soil corrosivity index, material compatibility is critical. Pressure-treated wood must be rated for ground contact and include termite-resistant chemicals. Metal posts should be galvanized. Use stainless steel or hot-dip galvanized fasteners to prevent rust streaks from corrosion, which degrades appearance and weakens connections over time.
How is a fence in Lumberton built to withstand high winds?
The design is governed by the 130 MPH V-ult wind speed rating. This ultimate design wind speed, per ASCE 7-22 standards, dictates structural requirements. To survive peak storm season gusts, posts require closer spacing, deeper concrete footings, and wind-rated brackets. The panel design must also account for wind pressure to prevent failure during a severe weather event.
Can I have a smart gate if I have a pool?
Yes, but integration is key. The 2021 ISPSC and ASTM F1908 standards for pool barriers mandate self-closing, self-latching gates with specific release mechanisms. Modern IoT gate operators can be integrated with these compliant hardware latches. This meets both Texas safety code for pool enclosures and the moderate smart-gate trend for access control and liability protection.
How soon can you start a project in the Village Creek area?
Following a site consultation. Our standard dispatch route from Lumberton City Park uses US-69 for direct access, resulting in a consistent 15-20 minute response time to Village Creek. After the consultation and receipt of all approvals, we schedule the crew based on current labor availability at the prevailing $35/hr rate.
What is required before you dig the first fence post hole?
State law requires a utility locate request through Texas 811 at least two business days before digging. Hitting a gas, water, or fiber line in Village Creek is a major financial and safety liability. We manage this call and coordinate the subsequent markings with the Lumberton permit office to ensure all paperwork for the structure is filed and approved before mobilization.
