Top Fencing Companies in Lumberton, TX, 77625 | Compare & Call
There are 237 fencing companies server in Lumberton TX
Thrive Landscape And Design
Thrive Landscape And Design has served Austin, Texas, for two decades, specializing in custom outdoor spaces that blend function with sustainability. As a licensed landscape design company, we handle ...
Specialty Exterior Works
Specialty Exterior Works is a licensed and insured window and exterior cleaning company serving Austin, TX, since 2022. We are a locally owned and operated small business that offers a full spectrum o...
FenceMaxx is a family-owned fencing company based in Austin, TX, serving both residential and commercial properties. Co-founders Scott and Brandon bring decades of combined experience. Scott, original...
Secure Fence Solutions is a family-owned fence and gate company based in Austin, TX, with two generations of hands-on experience in residential and commercial installations. We focus on personalized s...
Flux & Flame brings over a decade of welding and metal fabrication expertise to Austin, TX. We specialize in custom metalwork, from decorative fire pits and structural reinforcements to prototype buil...
Gary Burton Fence Replacement/Repair is an Austin-based residential fence contractor with nearly 20 years of experience. Founder Gary Burton brings a background in fine woodworking from Maine, where h...
Sierra Fence, owned by Austin native Richard, a UT Austin graduate, has been installing fences and gates for over 25 years. As a family-run business, Richard, his wife, and son work together to serve ...
Custom Deck and Fence has been a family-owned Austin business since 1984, when the founder left the Air Force to carry on a family tradition of carpentry that goes back generations. Today, the company...
Pinar Fence Installers is a trusted, locally-owned fence and deck company serving Round Rock, Austin, and surrounding communities including Georgetown, Leander, Pflugerville, Hutto, Manor, Elgin, Coup...
Oakwood Roofing and Construction, a family-owned business in Austin, Texas, has been serving the community since 2019. Owner Jason Measeles brings over 20 years of experience in roofing and insurance ...
Estimated Fencing Costs in Lumberton, TX
Common Questions
Do I have to tell my neighbor in Lumberton if I replace our shared fence?
Yes. Texas Property Code Chapter 247, the 'Good Neighbor Fence Law,' requires written notice to adjoining landowners before replacing a boundary or partition fence. For 2026 projects, providing this notice is a legal prerequisite to establishing cost-sharing or addressing disputes over the new structure. Failure to notify can forfeit certain legal rights.
What are the height and placement rules for a fence on my Lumberton property?
Lumberton zoning limits fence heights to 4 feet in front yards and 8 feet in rear yards. A 0-foot setback allows installation directly on your property line. Critical for corner lots: you must maintain a clear 'sight triangle' at intersections for driver visibility, especially near high-traffic corridors like US-69. Violating this can result in a city-ordered removal.
Why do fence posts in Village Creek need to be set so deep?
Lumberton has a 12-inch frost line. When soil freezes, it can heave upwards, lifting shallow posts out of alignment. The IRC requires posts to be set at or below the local frost line depth to prevent structural failure from frost heave. Posts not set to this standard in the Village Creek area will likely tilt or fail within a few seasons.
What fence materials hold up best against Lumberton's termites and soil?
Given the Very Heavy termite risk and Moderate soil corrosivity index, material compatibility is critical. Pressure-treated wood must be rated for ground contact and include termite-resistant chemicals. Metal posts should be galvanized. Use stainless steel or hot-dip galvanized fasteners to prevent rust streaks from corrosion, which degrades appearance and weakens connections over time.
How is a fence in Lumberton built to withstand high winds?
The design is governed by the 130 MPH V-ult wind speed rating. This ultimate design wind speed, per ASCE 7-22 standards, dictates structural requirements. To survive peak storm season gusts, posts require closer spacing, deeper concrete footings, and wind-rated brackets. The panel design must also account for wind pressure to prevent failure during a severe weather event.
Can I have a smart gate if I have a pool?
Yes, but integration is key. The 2021 ISPSC and ASTM F1908 standards for pool barriers mandate self-closing, self-latching gates with specific release mechanisms. Modern IoT gate operators can be integrated with these compliant hardware latches. This meets both Texas safety code for pool enclosures and the moderate smart-gate trend for access control and liability protection.
How soon can you start a project in the Village Creek area?
Following a site consultation. Our standard dispatch route from Lumberton City Park uses US-69 for direct access, resulting in a consistent 15-20 minute response time to Village Creek. After the consultation and receipt of all approvals, we schedule the crew based on current labor availability at the prevailing $35/hr rate.
What is required before you dig the first fence post hole?
State law requires a utility locate request through Texas 811 at least two business days before digging. Hitting a gas, water, or fiber line in Village Creek is a major financial and safety liability. We manage this call and coordinate the subsequent markings with the Lumberton permit office to ensure all paperwork for the structure is filed and approved before mobilization.
