Top Fencing Companies in Nash, TX, 75501 | Compare & Call

There are 239 fencing companies server in Nash TX

Rollins Landscape & Irrigation

Rollins Landscape & Irrigation

★★★★☆ 4.0 / 5 (2)
San Antonio TX 78230
Landscaping, Irrigation, Fences & Gates

Rollins Landscape & Irrigation is a full-service landscaping company serving San Antonio, TX, for over a decade. We specialize in transforming outdoor spaces with expert design, installation, and main...

Al-E-Cats Exterior

Al-E-Cats Exterior

Fair Oaks Ranch TX 78015
Fences & Gates

Al-E-Cats Exterior provides fence and gate repair services to homeowners in Fair Oaks Ranch, TX, and the surrounding Hill Country area. Local properties often face fence hardware failures and post ero...

R&B remodeling

R&B remodeling

San Antonio TX 78227
General Contractors, Fences & Gates

R&B remodeling serves San Antonio, TX, as a trusted general contractor and fencing specialist, addressing common local issues like fence post erosion from heavy rains and cracking due to intense heat ...

Principal Maintenance

Principal Maintenance

★★★★★ 5.0 / 5 (1)
San Antonio TX 78249
Handyman, Fences & Gates, Lighting Fixtures & Equipment

Principal Maintenance is a trusted handyman service based in San Antonio, TX, specializing in maintenance and repair solutions for both residential and commercial properties. With over 10 years of exp...

Contreras fence 3R

Contreras fence 3R

711 Cutters Trl, Pipe Creek TX 78063
Fences & Gates

Contreras fence 3R provides expert fence and gate services to homeowners and businesses in Pipe Creek, TX. Located near the scenic Pipe Creek Elementary School and just off Highway 16, the team unders...

SA Roadrunner Construction

SA Roadrunner Construction

★★★★★ 5.0 / 5 (3)
San Antonio TX 78260
Decks & Railing, Fences & Gates

SA Roadrunner Construction, based in San Antonio, TX, specializes in custom decks, arbors, patio covers, and fencing. Our team guides homeowners from consultation through final installation, ensuring ...

TNJ Welding

TNJ Welding

★☆☆☆☆ 1.0 / 5 (1)
San Antonio TX 78248
Metal Fabricators, Fences & Gates

TNJ Welding is a trusted metal fabricator and fencing specialist serving San Antonio, TX, and the surrounding areas. Located just minutes from the historic Pearl District and the San Antonio River Wal...

Crissman Construction Group

Crissman Construction Group

★★★★★ 5.0 / 5 (2)
San Antonio TX 78254
Fences & Gates, Decks & Railing

Crissman Construction Group serves San Antonio homeowners with expert fence and deck services, from repairs to full installations. Based in the Alamo City, we understand the unique challenges of local...

Precision Auto Gates

Precision Auto Gates

★★★★★ 5.0 / 5 (1)
102 Fm 473, Comfort TX 78013
Fences & Gates

Jake, a Comfort High School graduate, has served the Texas Hill Country for over 25 years through Precision Auto Gates. His team installs and repairs automatic gates, telephone entry systems, and card...

Veteran Precision Welding & Construction

Veteran Precision Welding & Construction

San Antonio TX 78256
Fences & Gates, General Contractors, Metal Fabricators

Veteran Precision Welding & Construction is a San Antonio-based company owned by U.S. Army veteran John Brown, who learned welding and construction from his father as a child. With over a decade of ex...



Estimated Fencing Costs in Nash, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Nash. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

How is a fence engineered to handle Texas wind storms?

The design is governed by the V-ult wind speed of 115 MPH for ultimate load. This rating, per ASCE 7-22 standards, dictates post spacing, concrete footing mass, and bracket strength. For the Nash area, we reduce standard panel spans and use reinforced post bases to survive peak storm season gusts without racking or collapse.

What are the height and setback rules for a fence on my Nash property?

Nash zoning enforces a 4-foot height limit in front yards and an 8-foot limit in rear yards. The setback regulation is 0 feet, allowing installation on the property line. For corner lots, a 'sight triangle' must remain clear for driver visibility. This is critical near I-30. We survey and flag these zones before any layout to ensure code compliance.

What are the 2026 legal rules for replacing a shared fence in Nash, Texas?

Texas Property Code Chapter 247, the 'Good Neighbor' law, governs shared boundaries. As of 2026, you must provide a written notice of intent to adjoining property owners at least 30 days before construction. This is a strict liability step. Failure to notify can result in construction delays and legal disputes over cost-sharing.

Why do fence posts fail in Nash, and what's the engineering fix?

Posts fail from frost heave. The Nash City Center frost line depth is 6 inches. Posts not set below this depth lift during freeze-thaw cycles, cracking footings and racking panels. IRC Section R403.1.4 requires footings below the local frost line. We engineer footings to resist this uplift for stable, long-term alignment.

How do modern gate systems meet Texas safety and liability standards?

Integrated IoT gate latches now meet dual standards. They provide remote access, aligning with the low-to-moderate smart-gate trend. More critically, they integrate with International Residential Code Appendix AG for pool safety, requiring self-closing, self-latching mechanisms. This combination addresses modern liability for Texas homeowners by preventing unauthorized access.

What fence materials work best for Nash's soil and pest conditions?

Material compatibility is key. The moderate soil corrosivity index and moderate-to-heavy termite risk require specific choices. Use pressure-treated wood rated for ground contact or composite materials. All fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks from corrosion. We avoid materials susceptible to subterranean termite damage.

What is the critical first step before digging fence post holes?

You must contact Texas811 for a utility locate. This is a non-negotiable liability step. Hitting a gas, electric, or fiber line in Nash City Center can cause service outages, major fines, and personal injury. We manage the entire process, including submitting the required permit paperwork to the city office, to ensure a clear and legal start.

How soon can a specialist visit my property for a consultation?

We dispatch from our office near Nash City Hall. The route via I-30 allows for a consistent 15-20 minute response time to most Nash City Center locations. We can typically schedule a site assessment within 48 hours to review your zoning, engineering, and material needs on-site.



Scroll to Top
CALL US NOW