Top Fencing Companies in Palm Valley, TX, 78552 | Compare & Call

There are 232 fencing companies server in Palm Valley TX

Frontier Welding

Frontier Welding

Decatur TX 76234
Metal Fabricators, Fences & Gates

Frontier Welding serves homeowners and businesses in Decatur, TX, with custom metal fabrication, fence and gate installation, and repair. With two licensed welders on staff and full insurance, the tea...

Armor Fence Staining

Armor Fence Staining

Highland Village TX 75077
Fences & Gates, Masonry/Concrete, Shutters

Armor Fence Staining serves Highland Village, TX, providing expert fence and gate painting, staining, and weatherproofing. The intense Texas heat often causes wood fence warping, while broken gate lat...

Wesco Fence Company

Wesco Fence Company

★★★★★ 5.0 / 5 (1)
1802 Whispering Oaks St, Burleson TX 76028
Fences & Gates

Wesco Fence Company, based in Burleson, TX, has been building safe, secure, and long-lasting fences since 2009. Founded by a master carpenter's son, the business carries on a tradition of quality craf...

CD Solutions

CD Solutions

Denton TX 76207
Fences & Gates

CD Solutions provides fencing services to homeowners and property owners in Denton, Texas, and the surrounding areas. Specializing in a broad range of installations, the company works with farm and fi...

Eight Point Construction

Eight Point Construction

Decatur TX 76234
Fences & Gates

Eight Point Construction in Decatur, TX has been specializing in fencing since 2015. As a locally owned and operated business, we provide quality fencing solutions for homes and properties throughout ...

Superior Fence & Rail - North Texas

Superior Fence & Rail - North Texas

★☆☆☆☆ 1.0 / 5 (1)
Justin TX 76247
Fences & Gates

Superior Fence & Rail - North Texas serves homeowners and businesses in Justin, TX, with professional fence and gate services. As the highest-rated fence company nationwide, we focus on clear communic...

Quail Creek Construction

Quail Creek Construction

★★★★★ 5.0 / 5 (1)
Collinsville TX 76233
General Contractors, Decks & Railing, Fences & Gates

Quail Creek Construction, a family-owned business serving Collinsville, TX, brings over 40 years of expertise in new home construction, remodeling, renovations, repairs, and maintenance. From balcony ...

5B skid and fence services

5B skid and fence services

Pilot Point TX 76258
Fences & Gates

Tony Bridges founded 5B Skid and Fence Services in Pilot Point, TX back in 2017. What started as a one-man operation has grown into a trusted local business with a partnership and two additional crews...

Roye’s Fence&Welding

Roye’s Fence&Welding

Valley View TX 76272
Fences & Gates, Decks & Railing, Metal Fabricators

Roye’s Fence & Welding, based in Valley View, TX, is your local expert for fences, gates, decks, and custom metal fabrication. Located just off Highway 82 near the Valley View High School, the team sp...

Proft Welding Services

Proft Welding Services

Ponder TX 76259
Metal Fabricators, Fences & Gates

Proft Welding Services, located in Ponder, TX, specializes in metal fabrication and custom fencing solutions tailored to the unique challenges of local properties. The expansive clay soils in neighbor...



Estimated Fencing Costs in Palm Valley, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Palm Valley. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

How is a fence engineered for the 140 MPH wind load in this area?

The 140 MPH V-ult wind speed dictates the structural design. We calculate loads per ASCE 7-22 standards, which requires reduced post spacing (often 6 feet on-center), deeper footings, and wind-rated brackets. This engineering ensures the fence can survive peak storm season gusts without panel failure or catastrophic post pull-out.

Why do fence posts fail in Palm Valley Estates if footings aren't deep enough?

Posts fail due to frost heave. The IRC requires footings to extend below the frost line to prevent uplift. With a 0-inch frost line depth, the primary risk is wind-uplift and soil instability. We set posts to a minimum depth of 24 inches and use concrete footings sized for the 140 MPH V-ult wind load to ensure structural stability.

How soon can a crew start a project in Palm Valley Estates?

We schedule consultations within 48 hours. Our standard route from Palm Valley City Hall uses Expressway 77/83 for direct access, ensuring a 15-20 minute response time to most neighborhoods. After the site assessment and utility locate clearance, mobilization typically occurs within 5-7 business days, pending permit issuance.

What fencing materials hold up best to Palm Valley's termites and soil?

Material compatibility is critical. With a Very Heavy termite risk, pressure-treated wood must be rated for ground contact. For moderate soil corrosivity, use galvanized steel posts and ASTM A123 hot-dip galvanized fasteners. Aluminum or vinyl components prevent rust streaks. Avoid untreated wood and standard steel fasteners, which will corrode and attract pests.

What are the height and setback rules for fences in Palm Valley?

Zoning limits are 3 feet in front yards and 8 feet in rear/side yards, with a 0-foot setback allowing installation directly on the property line. For corner lots, a visibility 'sight triangle' is enforced, prohibiting obscuring obstructions within 15 feet of the intersection, especially critical for properties near Expressway 77/83 to maintain driver sight lines.

What are my legal duties to neighbors when building a fence in Palm Valley?

Texas Property Code Chapter 247, the 'Good Neighbor' Fence Act, governs shared boundaries. As of 2026, you must provide written notice to adjacent property owners at least 15 days before replacing a shared partition fence. Failure to provide this notice in Palm Valley can result in liability for damages and may require you to remove the new structure.

What is required before digging fence post holes in my yard?

State law requires a utility locate request through Texas811 at least two business days before digging. Hitting a gas, water, or fiber line in Palm Valley Estates is a major financial and safety liability. We manage this ticket and coordinate all required permit paperwork with the Palm Valley City Hall permit office to ensure a compliant start.

How do modern gates meet pool safety and security standards?

Integrated smart gate systems with IoT latches address both trends. They can be programmed to self-close and latch automatically, meeting ISPSC 2021 and ASTM F1908 pool barrier codes. This integration provides access logs and remote monitoring, creating a documented layer of security that meets modern liability standards for Texas homeowners.



Scroll to Top
CALL US NOW