Top Fencing Companies in Palm Valley, TX, 78552 | Compare & Call

There are 232 fencing companies server in Palm Valley TX

Hernandez Landscaping and Construction

Hernandez Landscaping and Construction

★★★★★ 5.0 / 5 (1)
Collinsville TX 76233
Lawn Services, Masonry/Concrete, Fences & Gates

Hernandez Landscaping and Construction, originally founded in 2010 as Frans Landscaping and Welding, has grown into a trusted provider of lawn care, fencing, concrete, and masonry services in Collinsv...

ND Fence

ND Fence

★★★★★ 5.0 / 5 (2)
Pilot Point TX 76258
Fences & Gates, Masonry/Concrete, Landscaping

ND Fence, based in Pilot Point, TX, is a licensed fence and masonry service provider with over 35 years of experience. As a woman-owned business, we specialize in wood, vinyl, and chain-link fence ins...

MELCHOR BROS PROJECTS

MELCHOR BROS PROJECTS

Valley View TX 76272
Fences & Gates

Based near the Valley View Towne Center, MELCHOR BROS PROJECTS is a local fence and gate company serving Valley View, TX. We understand the unique challenges our community faces, particularly with pri...

H & M Ranch Service's

H & M Ranch Service's

Saint Jo TX 76265
Fences & Gates, Metal Fabricators, Tree Services

With over 20 years of experience in ranching services, H & M Ranch Service’s provides reliable fencing, metal fabrication, and tree care to the Saint Jo community. Based near the historic Saint Jo tow...

North Texas Tree Service

North Texas Tree Service

Valley View TX 76272
Tree Services, Firewood, Fences & Gates

North Texas Tree Service has been serving Valley View, TX, and the surrounding areas with professional tree care, firewood, and fencing solutions. Located just off Farm to Market Road 922, near the Va...

MB Services

MB Services

Callisburg TX 76240
Tree Services, Fences & Gates, Masonry/Concrete

MB Services, based in Callisburg, TX, offers expert tree care, fencing, and masonry/concrete solutions to local homeowners. Many properties in Callisburg—especially those near Lake Callisburg and alon...

Buzbee Fence & Welding Services

Buzbee Fence & Welding Services

★☆☆☆☆ 1.0 / 5 (1)
Era TX 76238
Fences & Gates, Metal Fabricators

Buzbee Fence & Welding Services, based in Era, TX, specializes in metal fabrication and fencing solutions tailored to the unique challenges of North Texas weather. With frequent heat causing wood fenc...

Texoma Metal Fences

Texoma Metal Fences

Whitesboro TX 76273
Fences & Gates

Texoma Metal Fences, based in Whitesboro, TX, specializes in metal fence and gate solutions for residential and commercial properties. The area’s frequent fencing problems, such as damaged ornamental ...

CW Weld And Haul

CW Weld And Haul

★★★☆☆ 3.0 / 5 (2)
1655 Private Rd 4011, Decatur TX 76234
Junk Removal & Hauling, Metal Fabricators, Fences & Gates

CW Weld And Haul in Decatur, TX, specializes in junk removal, metal fabrication, and fence and gate services. With the local climate causing wood fence warping from heat and fence post instability due...

Rocky and Rob Fencing

Rocky and Rob Fencing

★☆☆☆☆ 1.0 / 5 (1)
9668 Fm 2164, Sanger TX 76266
Fences & Gates

Rocky and Rob Fencing is a trusted provider of fences and gates in Sanger, TX, serving homeowners near landmarks like the Sanger Depot Museum and neighborhoods such as Heritage Park. The team speciali...



Estimated Fencing Costs in Palm Valley, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Palm Valley. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

How is a fence engineered for the 140 MPH wind load in this area?

The 140 MPH V-ult wind speed dictates the structural design. We calculate loads per ASCE 7-22 standards, which requires reduced post spacing (often 6 feet on-center), deeper footings, and wind-rated brackets. This engineering ensures the fence can survive peak storm season gusts without panel failure or catastrophic post pull-out.

Why do fence posts fail in Palm Valley Estates if footings aren't deep enough?

Posts fail due to frost heave. The IRC requires footings to extend below the frost line to prevent uplift. With a 0-inch frost line depth, the primary risk is wind-uplift and soil instability. We set posts to a minimum depth of 24 inches and use concrete footings sized for the 140 MPH V-ult wind load to ensure structural stability.

How soon can a crew start a project in Palm Valley Estates?

We schedule consultations within 48 hours. Our standard route from Palm Valley City Hall uses Expressway 77/83 for direct access, ensuring a 15-20 minute response time to most neighborhoods. After the site assessment and utility locate clearance, mobilization typically occurs within 5-7 business days, pending permit issuance.

What fencing materials hold up best to Palm Valley's termites and soil?

Material compatibility is critical. With a Very Heavy termite risk, pressure-treated wood must be rated for ground contact. For moderate soil corrosivity, use galvanized steel posts and ASTM A123 hot-dip galvanized fasteners. Aluminum or vinyl components prevent rust streaks. Avoid untreated wood and standard steel fasteners, which will corrode and attract pests.

What are the height and setback rules for fences in Palm Valley?

Zoning limits are 3 feet in front yards and 8 feet in rear/side yards, with a 0-foot setback allowing installation directly on the property line. For corner lots, a visibility 'sight triangle' is enforced, prohibiting obscuring obstructions within 15 feet of the intersection, especially critical for properties near Expressway 77/83 to maintain driver sight lines.

What are my legal duties to neighbors when building a fence in Palm Valley?

Texas Property Code Chapter 247, the 'Good Neighbor' Fence Act, governs shared boundaries. As of 2026, you must provide written notice to adjacent property owners at least 15 days before replacing a shared partition fence. Failure to provide this notice in Palm Valley can result in liability for damages and may require you to remove the new structure.

What is required before digging fence post holes in my yard?

State law requires a utility locate request through Texas811 at least two business days before digging. Hitting a gas, water, or fiber line in Palm Valley Estates is a major financial and safety liability. We manage this ticket and coordinate all required permit paperwork with the Palm Valley City Hall permit office to ensure a compliant start.

How do modern gates meet pool safety and security standards?

Integrated smart gate systems with IoT latches address both trends. They can be programmed to self-close and latch automatically, meeting ISPSC 2021 and ASTM F1908 pool barrier codes. This integration provides access logs and remote monitoring, creating a documented layer of security that meets modern liability standards for Texas homeowners.



Scroll to Top
CALL US NOW