Top Fencing Companies in Palm Valley, TX, 78552 | Compare & Call

There are 232 fencing companies server in Palm Valley TX

Rhodes Fencing

Rhodes Fencing

Sanger TX 76266
Fences & Gates

Rhodes Fencing serves homeowners in Sanger, TX, specializing in fences and gates. A common local issue is loose fence panels and gate sagging, often caused by weather shifts and heavy use. Located nea...

Texas Gates and Fence

Texas Gates and Fence

2223 Hoffpauer Way, Sanger TX 76266
Fences & Gates, Stonemasons

Texas Gates and Fence serves the Sanger, TX community by addressing common fencing problems like post instability due to soil movement and loose panels. They install fences and gates, including automa...

Sbd Welding Fabrication

Sbd Welding Fabrication

7212 Fm 2450, Sanger TX 76266
Metal Fabricators, Fences & Gates, Trailer Repair

SBD Welding & Fabrication LLC, based in Sanger, TX, is a newly established company focused on custom metal fabrication, trailer repair, and fence and gate services. With years of combined experience i...

LH precision welding

LH precision welding

Valley View TX 76272
Decks & Railing, Fences & Gates, Metal Fabricators

LH Precision Welding in Valley View, TX, specializes in crafting durable decks, railings, fences, gates, and custom metal fabrications for local homeowners. Located near the intersection of FM 922 and...

Texas Custom Fence

Texas Custom Fence

Aubrey TX 76227
Fences & Gates

Texas Custom Fence serves homeowners in Aubrey, TX, and the surrounding areas, including neighborhoods near Aubrey Middle School and the historic downtown district. Specializing in fence and gate inst...

CRT Fence Staining and Restoration

CRT Fence Staining and Restoration

Aubrey TX 76227
Decks & Railing, Fences & Gates

CRT Fence Staining and Restoration serves the Aubrey, TX area, specializing in decks and railing, fences, and gates. With the intense Texas heat, many local properties suffer from fence cracking and d...

KCS Construction

KCS Construction

Pilot Point TX 76258
Fences & Gates, General Contractors, Metal Fabricators

KCS Construction has been serving the Pilot Point area for over 25 years with a focus on fences, gates, and metal structures. Our team of experienced professionals takes pride in every project, from b...

Ed’s Pallet & Fencing

Ed’s Pallet & Fencing

13480 Private Road 5805, Pilot Point TX 76258
Fences & Gates, Patio Coverings, Decks & Railing

Ed’s Pallet & Fencing is a trusted local business in Pilot Point, TX, specializing in fences, gates, patio coverings, decks, and railing. For years, homeowners in the Pilot Point area—especially those...

Hestand Boyz Helping Hand

Hestand Boyz Helping Hand

Tioga TX 76271
Handyman, Fences & Gates, Tree Services

Hestand Boyz Helping Hand serves Tioga, TX, as a local handyman service specializing in home repair, fence installation, and tree care. The team focuses on clear communication, keeping clients informe...

LoneStar Pool and Deck

LoneStar Pool and Deck

Whitesboro TX 76273
Fences & Gates, Decks & Railing, Pool & Hot Tub Service

LoneStar Pool and Deck serves Whitesboro, TX, and the surrounding area with expert deck construction, repair, and replacement services. Many local homes, especially those near the city's historic down...



Estimated Fencing Costs in Palm Valley, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Palm Valley. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

How is a fence engineered for the 140 MPH wind load in this area?

The 140 MPH V-ult wind speed dictates the structural design. We calculate loads per ASCE 7-22 standards, which requires reduced post spacing (often 6 feet on-center), deeper footings, and wind-rated brackets. This engineering ensures the fence can survive peak storm season gusts without panel failure or catastrophic post pull-out.

Why do fence posts fail in Palm Valley Estates if footings aren't deep enough?

Posts fail due to frost heave. The IRC requires footings to extend below the frost line to prevent uplift. With a 0-inch frost line depth, the primary risk is wind-uplift and soil instability. We set posts to a minimum depth of 24 inches and use concrete footings sized for the 140 MPH V-ult wind load to ensure structural stability.

How soon can a crew start a project in Palm Valley Estates?

We schedule consultations within 48 hours. Our standard route from Palm Valley City Hall uses Expressway 77/83 for direct access, ensuring a 15-20 minute response time to most neighborhoods. After the site assessment and utility locate clearance, mobilization typically occurs within 5-7 business days, pending permit issuance.

What fencing materials hold up best to Palm Valley's termites and soil?

Material compatibility is critical. With a Very Heavy termite risk, pressure-treated wood must be rated for ground contact. For moderate soil corrosivity, use galvanized steel posts and ASTM A123 hot-dip galvanized fasteners. Aluminum or vinyl components prevent rust streaks. Avoid untreated wood and standard steel fasteners, which will corrode and attract pests.

What are the height and setback rules for fences in Palm Valley?

Zoning limits are 3 feet in front yards and 8 feet in rear/side yards, with a 0-foot setback allowing installation directly on the property line. For corner lots, a visibility 'sight triangle' is enforced, prohibiting obscuring obstructions within 15 feet of the intersection, especially critical for properties near Expressway 77/83 to maintain driver sight lines.

What are my legal duties to neighbors when building a fence in Palm Valley?

Texas Property Code Chapter 247, the 'Good Neighbor' Fence Act, governs shared boundaries. As of 2026, you must provide written notice to adjacent property owners at least 15 days before replacing a shared partition fence. Failure to provide this notice in Palm Valley can result in liability for damages and may require you to remove the new structure.

What is required before digging fence post holes in my yard?

State law requires a utility locate request through Texas811 at least two business days before digging. Hitting a gas, water, or fiber line in Palm Valley Estates is a major financial and safety liability. We manage this ticket and coordinate all required permit paperwork with the Palm Valley City Hall permit office to ensure a compliant start.

How do modern gates meet pool safety and security standards?

Integrated smart gate systems with IoT latches address both trends. They can be programmed to self-close and latch automatically, meeting ISPSC 2021 and ASTM F1908 pool barrier codes. This integration provides access logs and remote monitoring, creating a documented layer of security that meets modern liability standards for Texas homeowners.



Scroll to Top
CALL US NOW