Top Fencing Companies in Roscoe, TX, 79545 | Compare & Call
There are 104 fencing companies server in Roscoe TX
Holden Powerwashing, based in Eustace, TX, is your local expert in restoring and protecting your property. We specialize in roofing, pressure washing, and fence & gate services, directly addressing co...
Pinnacle Fence has served Mabank and the surrounding East Texas area since 2000, offering residential and commercial fencing and gate solutions. We specialize in wood, PVC, ornamental, and chain-link ...
A to B Custom Fencing & Entryways, based in Mabank, TX, specializes in expert fence and gate solutions for local homeowners. Serving areas near Cedar Creek Lake and downtown Mabank, the business addre...
Jerami Kennamer Services
Jerami Kennamer Services provides expert fencing, gate, metal fabrication, and irrigation solutions to homeowners in Mabank, TX, and surrounding areas. Located near the Mabank city limits, just off Hi...
Estimated Fencing Costs in Roscoe, TX
Frequently Asked Questions
How do I build a fence to withstand Roscoe's high winds?
The design wind speed for Roscoe is 115 MPH V-ult. This engineering rating dictates post spacing, concrete footing size, and bracket strength. For a standard 8-foot panel, posts must be spaced no more than 8 feet on-center and set in a 12-inch diameter concrete pier to survive peak storm season gusts from the west.
What are the height and setback rules for a Roscoe fence?
Zoning limits are 4 feet in the front yard and 8 feet in the rear yard, with a 0-foot setback allowing installation directly on the property line. Corner lots near I-20 have critical 'sight triangle' visibility zones where any fence over 3 feet high is prohibited to maintain driver sightlines.
Am I required to notify my neighbor before building a fence?
Yes. Texas Property Code Chapter 251, the 'Good Neighbor Fence Law,' mandates written notice to adjoining property owners before replacing a shared boundary fence. As of 2026, this notice must be sent via certified mail at least 30 days prior to construction for projects in Roscoe.
What is required before digging fence post holes?
Texas811 must be contacted at least two business days before any excavation. Hitting an unmarked utility line in Downtown Roscoe creates major repair costs and liability. After the locate, you must file a permit application with the city's building department; the process typically takes 3-5 business days for review.
How soon can a fencing crew start a project in Downtown Roscoe?
A standard project schedule begins with a site consultation. From Roscoe Collegiate High School, crews route via I-20 for a 15-20 minute response to most Downtown properties. With permits in hand and Texas811 clearance, mobilization can typically begin within 5-7 business days, pending current labor availability at the $35/hour average rate.
How does Roscoe's soil affect fence material choice?
Downtown Roscoe has a Moderate Soil Corrosivity Index and Moderate Termite Risk. Pressure-treated pine posts require ground-contact rated preservatives. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks. Cedar and composite materials offer better resistance to both moisture and pests in this environment.
What are the frost footing requirements for a fence in Roscoe?
The Roscoe frost line depth is 12 inches. The International Residential Code (IRC) requires all structural posts to be set a minimum of 12 inches below this line to prevent frost heave. In Downtown Roscoe's clay-heavy soil, posts set shallower than 36 inches total depth will uplift and fail after the first hard freeze.
Do modern pool fence codes allow for smart gates?
Yes. The 2026 IRC Appendix AG and Texas Health & Safety Code Chapter 757 permit automated gates with integrated IoT latches. These systems must have battery backup and self-closing/self-latching mechanisms that meet the same force and height standards as manual gates to limit liability.
