Top Fencing Companies in Sam Rayburn, TX, 75931 | Compare & Call

There are 87 fencing companies server in Sam Rayburn TX

CK Kustoms Iron Works

CK Kustoms Iron Works

★☆☆☆☆ 1.0 / 5 (2)
2102 Picton Ln, Rockport TX 78382
Metal Fabricators, Fences & Gates, Decks & Railing

CK Kustoms Iron Works, founded in 2013 as a welding hobby, has grown into a trusted metal fabrication and fencing company serving Rockport, TX, and the surrounding Aransas County area. Now based in Ro...

Rodriguez Home Repair

Rodriguez Home Repair

Corpus Christi TX 78415
General Contractors, Decks & Railing, Fences & Gates

Rodriguez Home Repair, LLC has been serving Corpus Christi since 2003, backed by over 30 years of hands-on experience. As a fully insured general contractor, we specialize in custom builds, including ...

K&M CCU & Fencing

K&M CCU & Fencing

★☆☆☆☆ 1.0 / 5 (2)
4531 Ayers Ste 113, Corpus Christi TX 78415
Office Cleaning, Home Cleaning, Fences & Gates

K&M CCU & Fencing, owned by Mary and Kevin Cerda, serves Corpus Christi with commercial and residential cleaning and fencing. Kevin has been building fences since age 14, turning a side gig into a ful...

Platinum Services & Remodeling

Platinum Services & Remodeling

3614 S Alameda St, Corpus Christi TX 78411
Fences & Gates, Decks & Railing, General Contractors

Platinum Services & Remodeling has been serving homeowners in Corpus Christi, TX, for over a decade, offering expert solutions for fences, gates, decks, and general contracting. Located just off Stapl...

Uplift Lawn & Landscape

Uplift Lawn & Landscape

★☆☆☆☆ 1.0 / 5 (1)
Corpus Christi TX 78415
Landscaping, Fences & Gates, Tree Services

Uplift Lawn & Landscape is a licensed and insured landscaping company serving residential and commercial clients in Corpus Christi, TX. With five years of experience, the team offers a full range of s...

Oceanside Granite & Construction

Oceanside Granite & Construction

Corpus Christi TX 78411
Countertop Installation, Fences & Gates, Painters

Oceanside Granite & Construction is a full-service home improvement company serving Corpus Christi, TX. While specializing in countertop installation, they also offer comprehensive exterior services i...

Perfect Touch Fencing

Perfect Touch Fencing

Corpus Christi TX 78414
Fences & Gates

Serving Corpus Christi, TX, Perfect Touch Fencing specializes in the installation, repair, and maintenance of fences and gates. For local homeowners and businesses, the intense coastal heat can cause ...

A Texas Pride Services

A Texas Pride Services

Alice TX 78332
General Contractors, Fences & Gates, Roofing

A Texas Pride Services is a trusted general contractor serving Alice, TX, and the surrounding Jim Wells County. Specializing in fences and gates, roofing, and full home remodeling, they address the co...

My Little Fence Company

My Little Fence Company

Portland TX 78374
Fences & Gates

My Little Fence Company is a family-owned business serving Portland, TX, with honesty, hard work, and quality at the core of everything we do. We specialize in building strong, beautiful fences and ga...

Rockin’ S&R Ranch Services

Rockin’ S&R Ranch Services

Alice TX 78332
Fences & Gates, Excavation Services, Demolition Services

Rockin’ S&R Ranch Services, based in Alice, TX, handles the heavy lifting so property owners can simply enjoy their land. As a veteran-owned and -operated business, we specialize in building both low ...



Estimated Fencing Costs in Sam Rayburn, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Sam Rayburn. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

Can I have an automatic gate for my pool area?

Yes, but the gate system must integrate with pool safety codes. Under IRC Appendix AG, any gate accessing a pool must be self-closing, self-latching, and a minimum of 48 inches high. In 2026, we use low-voltage IoT operators with integrated sensors that log every latch event. This creates an audit trail, meeting modern liability standards for Texas homeowners and the low-to-moderate smart gate trend in the area.

How deep should my fence posts be set in Sam Rayburn?

All posts in Sam Rayburn Residential require a minimum 12-inch footing depth to pass below the local frost line. Shallow posts will fail due to frost heave, which lifts footings and shatters concrete. This is a non-negotiable IRC standard. For 8-foot structures, we typically embed posts 30 inches deep to achieve required stability against the 115 MPH V-ult wind rating.

What is the best fence material for this area?

Material selection is critical. Sam Rayburn has a Very Heavy termite risk and a Moderate soil corrosivity index. Pressure-treated Southern Yellow Pine is the standard for wood, with borate treatment for termites. For metal, use only hot-dip galvanized or aluminum fasteners. Inferior hardware will rust, causing unsightly streaks and structural failure at the bracket connections within a few years.

What steps are required before you dig?

State law requires a Texas811 utility locate request at least two business days before excavation. Hitting a gas, water, or fiber line in Sam Rayburn Residential is a major liability involving repair costs and fines. We manage this process and all related permit office paperwork directly. The city will inspect the footing depth and setback before we proceed with the installation.

Is a standard fence strong enough for the wind here?

No. The 115 MPH V-ult wind speed rating dictates the structural design. A basic 8-foot panel will fail. We engineer for this by reducing standard post spacing from 8 feet to 6 feet, using 6x6 posts instead of 4x4, and specifying ASCE 7-22-rated hurricane brackets. This system is designed to survive peak storm season gusts, especially for properties with higher exposure near the Sam Rayburn Dam.

How soon can you start a project in my neighborhood?

Our standard consultation dispatch is 35-45 minutes. Our crew routes from the Sam Rayburn Dam area via US-96 to your property in Sam Rayburn Residential. After the site survey and contract signing, typical lead time for material procurement and permit approval is 10-14 business days before physical work begins. The local labor rate averages $32 per hour for skilled installation.

Do I need to tell my neighbor before building a fence?

Yes. Texas Property Code Chapter 247, the 'Good Neighbor' law, requires written notice to all adjoining property owners before replacing or building a shared boundary fence in Sam Rayburn. In 2026, this notice must be sent via certified mail or personal delivery at least 30 days prior to the start of work. This law prevents disputes over partition fence costs and property lines.

What are the height and placement rules for my fence?

Sam Rayburn zoning limits fence height to 4 feet in front yards and 8 feet in rear yards. A 0-foot setback allows building directly on your property line. For corner lots, a clear 'sight triangle' is mandatory. This means no obstructions over 3 feet high within 25 feet of the intersection, especially critical for lots near US-96 to maintain driver visibility and meet municipal safety codes.



Scroll to Top
CALL US NOW