Top Fencing Companies in Tatum, TX, 75691 | Compare & Call

There are 72 fencing companies server in Tatum TX

AG Custom Painting

AG Custom Painting

★★★★★ 4.7 / 5 (26)
Round rock TX 78664
Painters, Drywall Installation & Repair, Fences & Gates

AG Custom Painting, based in Round Rock, TX, is a licensed residential and commercial painting company with over 15 years of experience serving Central Texas. We specialize in interior and exterior pa...

Aztec Automatic Gate Systems

Aztec Automatic Gate Systems

★★★★★ 5.0 / 5 (1)
Temple TX 76501
Fences & Gates

Aztec Automatic Gate Systems, based in Temple, TX, specializes exclusively in gate and gate operator solutions for homes and businesses. With deep expertise in designing, installing, and maintaining b...

Diamond Cutz Services

Diamond Cutz Services

★★☆☆☆ 2.0 / 5 (1)
Killeen TX 76541
Fences & Gates, Landscaping, General Contractors

Diamond Cutz Services is a family-owned and operated general contracting, landscaping, and fencing company serving Killeen, TX. Based near the Willow Springs neighborhood and just minutes from downtow...

Hewitt Garage Door Services

Hewitt Garage Door Services

Hewitt TX 76643
Fences & Gates, Metal Fabricators, Garage Door Services

Hewitt Garage Door Services, founded by Gary Savage in 2010, is a locally owned business serving Waco and McLennan County, Texas. Gary started the company after years of experience with garage doors a...

Completely Decked Out

Completely Decked Out

★★★★★ 5.0 / 5 (5)
Belton TX 76513
General Contractors, Decks & Railing, Fences & Gates

Completely Decked Out is a family-owned and operated home services company serving Belton, TX, since 2003. With over 23 years of experience, we specialize in custom decks, fences, pergolas, and compre...

Metal Dynamic Worx

Metal Dynamic Worx

★★★★★ 5.0 / 5 (3)
Robinson TX 76706
Fences & Gates, Metal Fabricators, Decks & Railing

Metal Dynamic Worx is a family-owned and operated business based in Robinson, Texas, serving residential and commercial clients throughout Central Texas. We specialize in custom gates, fences, railing...

Total Precision Welding and Fabrication

Total Precision Welding and Fabrication

★★★★★ 5.0 / 5 (1)
Round Rock TX 78664
Fences & Gates, Metal Fabricators, Awnings

Total Precision Welding and Fabrication provides expert metal fabrication, fencing, gate installation, and awning services to Round Rock, TX. Located near the Dell Diamond and downtown Round Rock, the...

Goodworks Fence And Iron

Goodworks Fence And Iron

Dime Box TX 77853
Fences & Gates, Metal Fabricators

Goodworks Fence and Iron LLC serves Dime Box, TX, as a provider of residential metal solutions. We design, fabricate, and install custom ornamental iron fences, gates, and railings, combining aestheti...

Adams Barn and Fence Co

Adams Barn and Fence Co

Belton TX 76513
Fences & Gates, Handyman

Adams Barn and Fence Co provides professional fence and gate installation, repair, and weatherproofing services to Belton, TX, and the surrounding area. We also offer comprehensive handyman services i...

LHR Backyards

LHR Backyards

thornton TX 76687
Fences & Gates, Decks & Railing, Flooring

LHR Backyards is a family-owned business serving Thornton, TX, run by a husband-and-wife team who share a deep commitment to quality and community. Founded in 2021 by the owner and his brother, Gabe, ...



Estimated Fencing Costs in Tatum, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Tatum. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What is the typical timeline and route for a consultation in Downtown Tatum?

A consultation can be scheduled within 48 hours of inquiry. The standard dispatch route originates from Tatum City Hall, proceeding west on US-79 to the Downtown grid. This route ensures a 15-20 minute response time for most properties in the core neighborhood. The consultation includes a site survey, zoning verification, and a project plan aligned with the current $35/hour average labor rate for the area.

Why is frost depth so critical for fence post footings in Tatum?

Tatum's 6-inch frost line requires footings below that depth. If posts are set in shallow concrete above the frost line, seasonal freeze-thaw cycles cause frost heave. This lifts posts out of alignment, creating permanent structural failure. IRC Section R403.1.4 mandates this depth for stability. In Downtown Tatum's clay soils, improper footings lead to leaning fences within two winters.

How do modern pool fences integrate with smart home technology?

While smart gate adoption is low in Tatum, integrating an IoT-enabled latch with a pool fence meets updated liability standards. The 2021 ISPSC and ASTM F1908 code require self-closing, self-latching gates. A smart latch can provide tamper alerts and status monitoring via a homeowner's phone. This creates an auditable record of gate security, which is a strong defense in the event of a liability claim.

How is a fence engineered for Tatum's 115 MPH V-ult wind speed?

The 115 MPH 'V-ult' ultimate wind speed is a design parameter from ASCE 7-22 standards. It dictates post spacing, concrete footing size, and bracket strength. For a solid-panel fence, posts typically require 6-foot centers or less, with footings 24 inches deep. Connections must use through-bolts or structural lag screws, not nails. This engineering prevents failure during peak storm season gusts, which channel through areas near US-79.

How does Tatum's environment affect fence material selection?

Downtown Tatum presents a Very Heavy termite risk and Moderate soil corrosivity. Pressure-treated pine must use ground-contact rated preservatives (UC4B or higher). For metal posts and fasteners, hot-dip galvanized steel or stainless steel is required to prevent rust streaks from corrosive soils. Aluminum or composite materials offer strong resistance to both decay and insect damage in this environment.

What are the height and setback rules for fences in Tatum?

Tatum zoning limits fence heights to 4 feet in the front yard and 8 feet in the rear. The 0-foot setback allows construction directly on the property line. For corner lots, especially near high-traffic corridors like US-79, a visibility 'sight triangle' is enforced. No fence or planting over 3 feet high is permitted within 25 feet of the street intersection corner to maintain driver sightlines.

What is the required process before digging fence post holes?

Texas state law mandates a utility locate request through Texas811 at least two business days before digging. In Downtown Tatum, hitting a buried gas, electric, or fiber line is a major liability involving repair costs and service outages. The locate service marks public lines; private lines from the meter to the house are the homeowner's responsibility to map. All permits from Tatum City Hall must be secured before the locates are called in.

What are the legal steps for replacing a shared fence in Texas?

Texas Property Code Chapter 247, updated for 2026, requires written notice to adjoining landowners before altering a shared boundary 'partition fence.' In Tatum, you must provide this notice at least 30 days prior to starting work. Failure to notify can result in a civil action for damages. This law addresses good-faith repairs and establishes a formal process for cost-sharing disputes.



Scroll to Top
CALL US NOW