Top Fencing Companies in Tatum, TX, 75691 | Compare & Call

There are 72 fencing companies server in Tatum TX

Hill County Builders

Hill County Builders

Hillsboro TX 76645
General Contractors, Fences & Gates, Decks & Railing

Hill County Builders is a locally-owned and operated construction service based in Hillsboro, Texas, specializing in fences, gates, decks, patios, railings, and remodeling. Located near the historic H...

Texcon Construction & Gates

Texcon Construction & Gates

Whitney TX 76692
Fences & Gates, General Contractors, Handyman

Texcon Construction & Gates in Whitney, TX, brings 30 years of construction experience to Lake Whitney and the surrounding Hill County area. We specialize in gates and access controls, but as a full-s...

Outlaw Fence & Fabrication

Outlaw Fence & Fabrication

Waco TX 76640
Metal Fabricators, Fences & Gates

Outlaw Fence & Fabrication in Waco, TX, brings years of welding experience to every project. The owner specializes in custom fences and gates, repair welding, and pipe entrances, turning your vision i...

SC Services

SC Services

Woodway TX 76712
Fences & Gates, Lawn Services

SC Services is a local Woodway, TX company offering fencing, gates, and lawn care. Located near the Woodway Country Club and the Carleen Goode Park neighborhoods, they tackle common local issues like ...

Aguillon Fences

Aguillon Fences

Mexia TX 76667
Fences & Gates, Lawn Services

I started Aguillon Fences because I enjoy working outdoors and building things that last. Every fence I install or repair is done with solid, clean workmanship, and I treat every customer with honesty...

Pacheco’s Fencing

Pacheco’s Fencing

Marlin TX 76661
Handyman, Roofing, Fences & Gates

Pacheco’s Fencing serves Marlin, TX, offering expert handyman, roofing, and fence & gate services. Many local homes struggle with loose fence panels and vegetation overgrowth that can warp or rot wood...

Brothers Construction Company

Brothers Construction Company

Mart TX 76664
General Contractors, Cabinetry, Fences & Gates

Brothers Construction Company in Mart, TX, is a family-owned business run by four brothers who grew up on construction sites with their father. From a young age, they developed a passion for building ...

D4 AG Construction

D4 AG Construction

★★★★★ 5.0 / 5 (2)
Madisonville TX 77864
Fences & Gates

D4 AG Construction is a family-run fencing business based in Madisonville, TX, rooted in the local community. Owner and operator, born and raised in Madisonville, brings hands-on experience and a pass...

Panttila Ranch Services

Panttila Ranch Services

Caldwell TX 77836
Fences & Gates

Panttila Ranch Services is a locally owned small business in Caldwell, TX, offering complete fencing and gate solutions for property owners in the Brazos Valley. We specialize in fence and gate instal...

5M Operations

5M Operations

Caldwell TX 77836
Metal Fabricators, Fences & Gates, Trailer Repair

5M Operations is a trusted metal fabrication, fencing, and gate service provider based in Caldwell, TX. Serving the local community near the downtown square and along Highway 21, they specialize in fe...



Estimated Fencing Costs in Tatum, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Tatum. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What is the typical timeline and route for a consultation in Downtown Tatum?

A consultation can be scheduled within 48 hours of inquiry. The standard dispatch route originates from Tatum City Hall, proceeding west on US-79 to the Downtown grid. This route ensures a 15-20 minute response time for most properties in the core neighborhood. The consultation includes a site survey, zoning verification, and a project plan aligned with the current $35/hour average labor rate for the area.

Why is frost depth so critical for fence post footings in Tatum?

Tatum's 6-inch frost line requires footings below that depth. If posts are set in shallow concrete above the frost line, seasonal freeze-thaw cycles cause frost heave. This lifts posts out of alignment, creating permanent structural failure. IRC Section R403.1.4 mandates this depth for stability. In Downtown Tatum's clay soils, improper footings lead to leaning fences within two winters.

How do modern pool fences integrate with smart home technology?

While smart gate adoption is low in Tatum, integrating an IoT-enabled latch with a pool fence meets updated liability standards. The 2021 ISPSC and ASTM F1908 code require self-closing, self-latching gates. A smart latch can provide tamper alerts and status monitoring via a homeowner's phone. This creates an auditable record of gate security, which is a strong defense in the event of a liability claim.

How is a fence engineered for Tatum's 115 MPH V-ult wind speed?

The 115 MPH 'V-ult' ultimate wind speed is a design parameter from ASCE 7-22 standards. It dictates post spacing, concrete footing size, and bracket strength. For a solid-panel fence, posts typically require 6-foot centers or less, with footings 24 inches deep. Connections must use through-bolts or structural lag screws, not nails. This engineering prevents failure during peak storm season gusts, which channel through areas near US-79.

How does Tatum's environment affect fence material selection?

Downtown Tatum presents a Very Heavy termite risk and Moderate soil corrosivity. Pressure-treated pine must use ground-contact rated preservatives (UC4B or higher). For metal posts and fasteners, hot-dip galvanized steel or stainless steel is required to prevent rust streaks from corrosive soils. Aluminum or composite materials offer strong resistance to both decay and insect damage in this environment.

What are the height and setback rules for fences in Tatum?

Tatum zoning limits fence heights to 4 feet in the front yard and 8 feet in the rear. The 0-foot setback allows construction directly on the property line. For corner lots, especially near high-traffic corridors like US-79, a visibility 'sight triangle' is enforced. No fence or planting over 3 feet high is permitted within 25 feet of the street intersection corner to maintain driver sightlines.

What is the required process before digging fence post holes?

Texas state law mandates a utility locate request through Texas811 at least two business days before digging. In Downtown Tatum, hitting a buried gas, electric, or fiber line is a major liability involving repair costs and service outages. The locate service marks public lines; private lines from the meter to the house are the homeowner's responsibility to map. All permits from Tatum City Hall must be secured before the locates are called in.

What are the legal steps for replacing a shared fence in Texas?

Texas Property Code Chapter 247, updated for 2026, requires written notice to adjoining landowners before altering a shared boundary 'partition fence.' In Tatum, you must provide this notice at least 30 days prior to starting work. Failure to notify can result in a civil action for damages. This law addresses good-faith repairs and establishes a formal process for cost-sharing disputes.



Scroll to Top
CALL US NOW