Top Fencing Companies in Taylor, TX, 76574 | Compare & Call

There are 238 fencing companies server in Taylor TX

All Fenced Up

All Fenced Up

Burnet TX 78611
Fences & Gates

All Fenced Up is a locally owned and operated fencing company serving Burnet, TX, and the surrounding areas. With years of experience, the team treats each project as a craft, aiming for durability an...

3G Skid Steer Services

3G Skid Steer Services

Kenedy TX 78119
Shredding Services, Fences & Gates, Metal Fabricators

3G Skid Steer Services in Kenedy, TX, specializes in fencing, gates, metal fabrication, and shredding services. Located near the Kenedy County Courthouse and along Highway 181, the business addresses ...

AMG Fence & Builders

AMG Fence & Builders

★★★★☆ 4.1 / 5 (9)
Kyle TX 78640
Fences & Gates

AMG Fence & Builders is a family-owned company based in Kyle, TX, serving the Texas Hill Country and Austin area. With over 15 years of experience, we specialize in fence and gate installation, repair...

DR Ds Custom

DR Ds Custom

San Antonio TX 78245
Metal Fabricators, Fences & Gates, Trailer Repair

DR.D's Custom Welding and Fabrication in San Antonio, TX, started in 2020 as a family-run operation dedicated to quality craftsmanship. We've grown into a trusted name for metal fabrication, metal rol...

Gibson’s Home Repairs

Gibson’s Home Repairs

San Antonio TX 78247
Fences & Gates, Painters, Roofing

Gibson’s Home Repairs in San Antonio, TX, is your go-to for fences, gates, painting, and roofing. Local homeowners often face wind-damaged fence sections from Texas storms and sun-faded fence staining...

H & H Vinyl Fencing

H & H Vinyl Fencing

★★★★★ 5.0 / 5 (1)
La Vernia TX 78121
Fences & Gates

H & H Vinyl Fencing, based in La Vernia, TX, is a licensed fencing contractor with over 20 years of experience serving both residential and commercial clients. Specializing in vinyl and wood fence ins...

Gonzalez Welding & Junk Removal

Gonzalez Welding & Junk Removal

Atascosa TX 78002
Fences & Gates, Metal Fabricators, Junk Removal & Hauling

Gonzalez Welding & Junk Removal is a local service provider based in Atascosa, TX, offering dual expertise in fence and gate work and full-service junk removal. Whether you need sagging gates tightene...

Triple-A Welding

Triple-A Welding

Somerset TX 78069
Fences & Gates, Metal Fabricators, Decks & Railing

Triple-A Welding Co. in Somerset, TX, was founded with a simple goal: to deliver honest, quality work to local homeowners and businesses. We specialize in metal fabrication, including custom wrought i...

Good Ol Boys Welding

Good Ol Boys Welding

Boerne TX 78006
Metal Fabricators, Fences & Gates, Patio Coverings

Good Ol Boys Welding, a family-owned and operated business based in Boerne, TX, has been delivering custom metal work for over 20 years. We specialize in a wide range of services, including the fabric...

M2 Land Solutions

M2 Land Solutions

★★★★★ 5.0 / 5 (1)
11295 Shaenfield Rd, San Antonio TX 78254
Machine & Tool Rental, Excavation Services, Fences & Gates

M2 Land Solutions provides excavation, trench digging, and machine and tool rental services to property owners in San Antonio, TX. If you're dealing with rusting metal fence hardware or wind-damaged f...



Estimated Fencing Costs in Taylor, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Taylor. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

Why do fence posts in Downtown Taylor need deep footings?

The frost line depth is 6 inches. Post footings must extend below this point to prevent frost heave, which can lift posts and destroy fence alignment. According to IRC standards, posts set in shallow concrete will fail within one to two freeze-thaw cycles in this neighborhood. Proper footings resist this upward force.

What are the critical steps before digging fence post holes?

You must contact Texas811 at least two business days before digging. They will mark all public utility lines. Hitting a gas, water, or fiber line in Downtown Taylor is a major liability and can cause service outages. After the locate is complete, you must secure a permit from the Taylor Development Services Department. We manage this paperwork to ensure code compliance.

What are the height and placement rules for a fence on my property in Taylor?

Zoning limits are 4 feet tall in the front yard and 8 feet in the rear. The setback regulation allows a 0-foot setback, meaning you can build directly on the property line. For corner lots, especially those near US-79, a clear 'sight triangle' must be maintained for traffic visibility. This often prohibits solid fencing within 15 feet of the intersection.

What are the requirements for a fence around a pool, and can I use a smart gate?

Pool fences must comply with the 2021 International Swimming Pool and Spa Code (ISPSC) and Taylor Code of Ordinances Chapter 3. This requires a 48-inch minimum height, self-closing and self-latching gates. Integrating a smart gate with IoT latches is a moderate trend and can meet these standards if the latch mechanism is certified for child safety, reducing liability for Texas homeowners.

How do I make sure my fence can handle high winds in Taylor?

The design wind load for Taylor is 115 MPH V-ult. This ultimate wind speed dictates structural requirements. To survive peak storm season gusts, post spacing must be reduced (often to 6-foot centers), and concrete footings must be oversized. Connections require rated hurricane brackets, not standard nails or screws, to transfer the wind force into the ground.

How soon can a fencing contractor start a project in Downtown Taylor?

For a consultation, we can typically dispatch a project manager within 1-2 business days. The standard route from Murphy Park via US-79 allows for a 15-25 minute response time to most addresses in the downtown area. The actual project start date depends on material lead times and the permit approval schedule from the city.

Do I need to notify my neighbor before building a fence on the property line in Taylor?

Yes. Texas Property Code 217.001, the 'good neighbor law,' requires written notice to adjoining owners before replacing a shared boundary fence. As of 2026, you must provide this notice at least 30 days prior to construction. This law applies to all properties in Taylor, including those in the Downtown Historic District.

Which fence materials are best for Taylor's soil and pest conditions?

Taylor has moderate soil corrosivity and a moderate to heavy termite risk. Pressure-treated wood with UC4B ground contact rating is essential. For metal posts and hardware, use hot-dip galvanized or stainless steel fasteners to prevent rust streaks. Vinyl and composite materials offer high resistance to both corrosion and insect damage in this environment.



Scroll to Top
CALL US NOW