Top Fencing Companies in Wyldwood, TX, 78602 | Compare & Call

There are 239 fencing companies server in Wyldwood TX

Integrity Fence and Welding

Integrity Fence and Welding

Rockwall TX 75087
Fences & Gates, Metal Fabricators

Integrity Fence and Welding, based in Rockwall, TX, brings over 20 years of welding experience to every project. Founded six years ago, our business was built on the principle that honesty and reliabi...

Roder Roofing Solutions

Roder Roofing Solutions

★★★★★ 5.0 / 5 (1)
McKinney TX 75071
Roofing, Fences & Gates, Gutter Services

Roder Roofing Solutions in McKinney, TX, offers expert roofing, fencing, and gutter services to local homeowners. McKinney's hot summers and occasional storms can cause fence cracking from heat exposu...

Premier Fence

Premier Fence

★★★★★ 5.0 / 5 (2)
1066 W Main St, Gunter TX 75058
Fences & Gates, Patio Coverings

Premier Fence in Gunter, TX, is a family-owned and operated contractor serving North Texas since 1999. We specialize in fences, gates, and patio coverings for homeowners, custom builders, and commerci...

Ramirez Contract

Ramirez Contract

4021 S Kernack Dr, Dallas TX 75216
Painters, Fences & Gates, Drywall Installation & Repair

Ramirez Contract, based in Dallas, Texas, is a family-owned residential painting and home improvement business founded by a native of Michoacán, Mexico. With over two decades of experience, we special...

Rolling Gate and Fence

Rolling Gate and Fence

★★★★★ 4.5 / 5 (2)
1032 Profit Dr, Garland TX 75040
Fences & Gates

Rolling Gate and Fence has been a family-owned business in Garland since 2006. I personally oversee every project to ensure quality. We specialize in automatic gates, cedar fences, chainlink, wrought ...

Steel Titan Mobile Welder

Steel Titan Mobile Welder

★★★★★ 5.0 / 5 (1)
Garland TX 75043
Handyman, Metal Fabricators, Fences & Gates

Steel Titan Mobile Welder, based in Garland, TX, provides on-site metal fabrication, welding repairs, and light tree trimming services throughout the Dallas-Fort Worth metroplex. As a veteran-owned an...

Brown's Fence & Repair

Brown's Fence & Repair

★★★★☆ 4.2 / 5 (5)
5311 Dixie Cir, Sachse TX 75048
Fences & Gates, Decks & Railing

Brown's Fence & Repair has been serving Sachse and the surrounding areas since 1983. As a family-owned and operated business, we specialize in fence and gate installation, repair, painting, staining, ...

Decks and Stuff

Decks and Stuff

★★★★☆ 4.2 / 5 (5)
Rowlett TX 75088
Fences & Gates, Decks & Railing, Patio Coverings

Decks and Stuff is a family-owned and veteran-operated outdoor construction company based in Rowlett, TX. Founded by a carpenter who learned his trade in Las Vegas before serving in the military, the ...

Ac Dc Welding and Fabrication

Ac Dc Welding and Fabrication

★★★★★ 5.0 / 5 (2)
Dallas TX 75230
Metal Fabricators, Fences & Gates

AC DC Welding and Fabrication is a family-owned metal fabrication and fencing company serving Dallas, Fort Worth, and surrounding areas. We specialize in custom metal work for trailers, gates, fences,...

Garrett’s Gates And Garage Doors

Garrett’s Gates And Garage Doors

★★★★★ 5.0 / 5 (1)
Wylie TX 75098
Garage Door Services, Fences & Gates

Garrett’s Gates And Garage Doors has been serving Wylie, TX, and the surrounding North Texas area for over 15 years. We specialize in the installation, repair, and maintenance of garage doors and auto...



Estimated Fencing Costs in Wyldwood, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Wyldwood. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

Can a smart gate system meet pool safety codes in Texas?

Yes, with integrated design. The 2026 IBC/IRC Appendix AG pool barrier code requires self-closing gates with latches at 54 inches minimum height. Modern smart gate IoT systems can integrate motorized closers and high-level electronic latches that meet this standard, creating an auditable access log. This combination addresses both security trends and strict liability standards for Texas homeowners with pools.

How is a fence engineered for Wyldwood's 115 MPH wind loads?

The V-ult wind speed of 115 MPH dictates the structural design. We calculate loads per ASCE 7-22 standards, which govern how wind pressure translates to uplift and shear forces. This engineering mandates specific post spacing (often 6-8 feet on-center, not 8), concrete footing diameter, and the use of wind-rated brackets. A fence built to these specs will survive peak storm season gusts without panel failure or overturning.

What is your timeline for a consultation and project start in Wyldwood?

We typically schedule consultations within one week. Our standard route from Wyldwood City Hall proceeds via US-183, with travel time to Wyldwood Estates averaging 35-45 minutes. Following the site assessment and plan approval, material lead times and permit processing dictate the start date. For a standard residential project, mobilization typically occurs 2-3 weeks after contract signing, barring supply chain delays.

Why do fence posts need footings below the frost line in Wyldwood?

The local frost line depth is 12 inches. Posts set above this depth are subject to frost heave, a cyclical lifting force from frozen soil. In Wyldwood Estates, this causes premature failure of post-to-concrete bonds and racking of the entire structure. IRC Section R403.1.4 mandates footings extend below this line for stability. We engineer all footings to a minimum 18-inch depth to exceed this requirement.

What are the height and setback rules for fences in Wyldwood, TX?

Zoning code enforces a 4-foot height limit in front yards and an 8-foot limit in rear/side yards. The standard setback is 0 feet, allowing construction directly on the property line. Critical exception: corner lots must maintain a clear 'sight triangle' at intersections. For properties near US-183, this unobstructed visibility zone is strictly enforced by the city to prevent traffic accidents. We survey this during the initial consultation.

What is required before digging fence post holes in Wyldwood Estates?

State law requires a utility locate request through Texas 811 at least two business days before excavation. Hitting a buried gas, electric, or fiber line in the neighborhood is a major financial and safety liability. We manage this ticket process and coordinate the results with the city permit office. All necessary zoning permits and HOA approvals are secured before any equipment arrives on site.

What fencing materials hold up best against Wyldwood's soil and pests?

Material compatibility is critical. The soil has a moderate corrosivity index, requiring G90 galvanized steel posts and fasteners to prevent rust streaks. Termite risk is moderate to heavy, making untreated wood a poor long-term choice. We specify pressure-treated pine (ground contact rated), composite, or aluminum with stainless steel fasteners. This prevents structural compromise and cosmetic degradation.

Am I legally required to notify my neighbor before building a fence in Wyldwood?

Yes. Under Texas Property Code Chapter 247 (the 'Good Neighbor' law), you must provide written notice to adjoining property owners before constructing or replacing a partition fence on a shared boundary line. As of 2026, this notification is required even with a 0-foot setback. Failure to provide notice can result in disputes and legal liability for the cost of the shared structure.



Scroll to Top
CALL US NOW