Top Fencing Companies in Benson, UT, 84335 | Compare & Call
There are 120 fencing companies server in Benson UT
Since 2005, SimRock Fence in Lindon, UT, has provided professional fence and gate installation, repair, painting, staining, and weatherproofing. As a factory-certified installer of CertainTeed BuffTec...
Flores Welding, based in West Jordan, UT, provides dependable metal fabrication, fencing, gate installation, and deck services for residential and commercial clients. Our skilled team handles custom p...
Mammoth Fence, based in Lehi, UT, is a family-owned business that brings over a decade of hands-on experience to masonry, concrete, fencing, gates, and landscaping. Founded on the belief that a job is...
Antelope Ridge is a licensed fencing and landscaping company based in Highland, UT, serving Northern Utah with a comprehensive range of property enhancement services. Specializing in vinyl, wood, and ...
Ansell’s Sprinkler Landscape serves Clearfield, UT, with expert lawn care, fencing, and irrigation services. Located near the Clearfield Aquatic Center and historic Syracuse, the business tackles the ...
Utah Valley Fencing & Construction is a locally owned and operated business serving Saratoga Springs, UT. Founded by someone who learned the fencing trade from the ground up, the company focuses on qu...
Since 2012, Diamond Fence has been a trusted fencing contractor in Sandy, UT, serving residential and commercial properties across Salt Lake, Utah, and Davis Counties. We specialize in vinyl, wood, an...
AAA Steelworx, based in Draper, UT near the Point of the Mountain and Draper Temple, is your local expert for metal fabrication, carpentry, powder coating, and sandblasting. Draper's snowy winters and...
At Frontline Fence, we believe a fence should do more than mark your property line—it should elevate it. Founded on the principle that building a fence shouldn't be complicated or stressful, our owner...
337 Metal Works, led by Lee Fordham, brings nearly 30 years of construction experience to Millcreek, UT. Lee began his career as a residential framer for luxury homes in St. George before becoming a l...
Estimated Fencing Costs in Benson, UT
Question Answers
What are the height and setback rules for a Benson fence?
Zoning limits are 4 feet in front yards and 6 feet in rear/side yards. The setback is 0 feet, allowing installation directly on the property line. For corner lots, pay strict attention to the 'sight triangle' at intersections. Fences within this triangle must be low or transparent to maintain driver visibility, a critical safety issue for properties near the US-89 corridor.
Is my fence designed for high winds?
Benson's 105 MPH V-ult wind speed rating is the governing engineering parameter. This 'ultimate design wind speed' from ASCE 7-22 standards dictates post spacing, concrete footing size, and bracket strength. A fence not engineered for this load will likely fail during the peak storm season, with catastrophic failure starting at the post-to-rail connections.
How soon can a crew start a project?
After permit approval, we typically mobilize within 5-7 business days. Our project manager will route from the Benson Park area via US-89 to your location for a final site verification, a process that usually takes 25-35 minutes. This consultation confirms layout, identifies any last-minute obstacles, and establishes the project timeline.
Why are post footings so deep in Benson?
The 30-inch frost line depth is the primary design factor. Frost heave exerts massive upward pressure on shallow footings. Following IRC Table R403.1(3), posts set above this line will shift, causing fence failure. In the Benson Community Center District, this is the leading cause of premature structural collapse.
What is required before you dig the first post hole?
Calling Blue Stakes of Utah at 811 is a non-negotiable, state-mandated step. They mark public utility lines. Hitting a buried line in the Benson Community Center District incurs major repair costs and liability. We then pull the required permit from the city office, ensuring the plans meet all local zoning and engineering codes before mobilization.
Can I add a smart gate to my pool fence?
Yes, but the primary requirement is compliance with IRC Appendix AG (2021 IBC), which mandates self-closing, self-latching gates that open outward. Integrated IoT latches that log access and send alerts can enhance security and provide a digital record, which is valuable for liability protection. While the smart gate trend is low locally, such systems meet modern safety standards.
What are my legal duties when replacing a shared fence?
Utah Code 72-10-101, the 'Good Neighbor Fence Act,' governs. As of 2026, you must provide written notice to the adjoining property owner at least 15 days before starting work on a partition fence. This notice must include a description of the planned fence, the proposed cost, and a request to share expenses. Failure to comply can void cost-sharing rights.
What fence materials hold up best in Benson's soil?
Material selection must address moderate soil corrosivity and slight to moderate termite risk. Pressure-treated pine or naturally resistant woods like cedar are standard. For metal posts and hardware, hot-dip galvanized or powder-coated fasteners are mandatory to prevent rust streaks. Avoid untreated steel in direct ground contact.