Top Fencing Companies in Artondale, WA, 98335 | Compare & Call

There are 235 fencing companies server in Artondale WA

R&R Fence Pros

R&R Fence Pros

Seattle WA 98188
Fences & Gates

R&R Fence Pros is a Seattle-based fencing contractor serving homeowners across neighborhoods like Capitol Hill, Ballard, and West Seattle. We specialize in repairing, staining, and maintaining fences,...

MG Exteriors

MG Exteriors

12059 3rd Ave S, Seattle WA 98168
Fences & Gates, Decks & Railing, General Contractors

MG Exteriors, owned by Matt Gurkin, serves Seattle, Bellevue, Kent, Federal Way, and the greater Seattle-Tacoma metro area. Specializing in decks, stairs, fences, gates, and hardscape masonry, we buil...

More Care

More Care

SeaTac WA 98188
General Contractors, Fences & Gates, Decks & Railing

More Care LLC has been serving the SeaTac, WA community since 1999, bringing over three decades of construction experience to every project. As a licensed and insured general contractor, we specialize...

J.M. Custom Services

J.M. Custom Services

Seattle WA 98106
Landscaping, Garage Door Services, Fences & Gates

J.M. Custom Services, based in Seattle, WA, provides reliable garage door installation and repair for homeowners across the city. With years of hands-on experience, they focus on automatic garage door...

Evergreen Legacy Builders

Evergreen Legacy Builders

20415 Bothell Everett Hwy, Bothell WA 98012
Fences & Gates, Masonry/Concrete, Landscaping

Evergreen Legacy Builders LLC, based in Bothell, WA, transforms outdoor spaces with a focus on durability and craftsmanship. We handle a full range of services including lawn and landscape work, drive...

TotalFix Contractors

TotalFix Contractors

Bothell WA 98011
Foundation Repair, Fences & Gates, Masonry/Concrete

TotalFix Contractors LLC is a locally owned, licensed, bonded, and insured team serving Bothell and the Greater Seattle area. We specialize in foundation repair, fence installation, concrete work, and...

Jetgen Metal-Worx

Jetgen Metal-Worx

★★★★★ 5.0 / 5 (1)
98312-1721, Bremerton WA 98312
Fences & Gates, Metal Fabricators

With over 25 years of experience, Jetgen Metal-Worx serves Bremerton, Silverdale, and the broader Kitsap County with custom metal fabrication and fence solutions. We start every project by visiting yo...

TNT General Contracting

TNT General Contracting

★★★☆☆ 3.0 / 5 (2)
Port Orchard WA 98366
General Contractors, Masonry/Concrete, Fences & Gates

TNT General Contracting, a family-owned business based in Port Orchard, has been delivering quality craftsmanship since 2001, officially opening in 2012. Owner Timothy brings over two decades of exper...

Tung Nguyen Landscaping

Tung Nguyen Landscaping

★☆☆☆☆ 1.0 / 5 (1)
1332 W Pioneer Ave, Puyallup WA 98371
Lawn Services, Fences & Gates, Masonry/Concrete

Tung Nguyen Landscaping provides lawn care, hardscaping, and garden design services to residential and commercial clients in Puyallup and the greater Seattle area. With over 10 years of experience, th...

Anaya's Quality Painting

Anaya's Quality Painting

18031 44th Pl W, Lynnwood WA 98037
Fences & Gates, Painters, General Contractors

Anaya's Quality Painting, based in Lynnwood, WA, is a full-service painting and general contracting company serving Seattle and surrounding areas. We specialize in interior and exterior painting, as w...



Estimated Fencing Costs in Artondale, WA

Emergency Fence/Gate RepairStorm / Security Response
$344 - $464
Wood Privacy Fence (Per LF)Estimated Range
$29 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $74
Standard Driveway Gate InstallEstimated Range
$1,229 - $1,649

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Artondale. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

How soon can a consultation be scheduled?

We dispatch from the Artondale Community Hall. A site visit is typically scheduled within 48 hours. The route uses WA-16 for access, with a standard 25-35 minute response window for consultations in the core Artondale area. This allows for an initial assessment of footing conditions, zoning compliance, and wind exposure on your specific lot.

Why do posts need to be set so deep in Artondale?

The 12-inch frost line depth dictates footing stability. Water in the soil freezes and expands, causing frost heave. Posts set above this line will lift and fail. Per IRC Section R403.1.4, all structural posts in Artondale Proper must extend below 12 inches to prevent movement. Shallow footings are a common failure point after winter.

What are the height and placement rules for my property?

Artondale zoning enforces a 4-foot height limit in front yards and 6 feet in rear yards. The 0-foot setback allows building directly on the property line. Critical for safety: corner lots have 'sight triangle' restrictions. Fences near intersections, especially those feeding WA-16, must be low-profile to maintain driver visibility. Violating these triangles creates a liability.

What is the first step before digging post holes?

You must call Washington 811. This free utility locate service marks public underground lines. Hitting a gas, water, or fiber line in Artondale Proper is a major financial and safety liability. We manage the process and concurrently file any required paperwork with the Pierce County permit office to ensure the project starts without legal or physical obstruction.

Is a standard fence strong enough for our wind?

No. The 110 MPH V-ult wind speed rating for the area dictates structural design. A fence built to ASCE 7-22 standards for this load requires specific post spacing, concrete footings, and wind-rated brackets. Standard 8-foot panel spacing often fails. Proper engineering accounts for peak storm season gusts, especially on lots with exposure from the Narrows.

How does local soil affect material choice?

Artondale's moderate soil corrosivity index and slight-to-moderate termite risk require compatible materials. Untreated wood in ground contact will decay. Use pressure-treated lumber rated for ground contact or corrosion-resistant metals. Fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks from forming on the finish, which is a common aesthetic failure.

Am I legally required to talk to my neighbor before a fence project?

Yes, for a shared or partition fence. RCW 16.60.020, the state's Good Neighbor Fence law, requires written notice to adjoining landowners in Artondale before replacing a boundary fence. As of 2026, this notification must include a good-faith estimate and proposed materials. Failure to provide notice can affect cost-sharing and lead to disputes.

Can I have a smart gate with a pool?

Yes, but integration is key. IRC Appendix AG (WAC 51-51) mandates self-closing, self-latching gates for pool enclosures. A 2026-compliant smart gate uses IoT sensors to confirm the latch is engaged and sends alerts. This dual function meets Washington's liability standards for access control while providing modern security logs for your Artondale home.



Scroll to Top
CALL US NOW