Top Fencing Companies in Artondale, WA, 98335 | Compare & Call
There are 235 fencing companies server in Artondale WA
NW Fencing Construction, based in Bothell, WA, has been serving local residents since November 2022. As a licensed (NWFENFC776K), insured, and bonded general contractor, our team brings over a decade ...
Gate Technologies, based in Auburn, WA, has been a trusted provider of fence and gate services for nearly a decade. As a licensed, bonded, and insured general and specialty electrical contractor, they...
Ivan, manager of Tidy Beaver Fencing in Redmond, WA, leads a team dedicated to redefining fence and deck installation. Founded in 2024, our company prioritizes quality, customer experience, and speed....
J A P Fence & Decks is a trusted local contractor serving Renton, WA, and the surrounding areas. Specializing in decks and railing, fences and gates, and patio coverings, the company helps homeowners ...
Constellation Fences, based in Kent, WA, specializes in custom iron gates and iron fence installation for both residential and commercial properties. Our team focuses on high-quality fabrication and d...
OJIBWE Construction serves homeowners and property managers in Seattle, WA, specializing in roofing, carpentry, and fence and gate services. Located near the Ballard and Fremont neighborhoods, the tea...
Olson's Outdoor Improvements
Olson's Outdoor Improvements, based in Maple Valley, WA, is a family-owned and locally operated company founded in 2014 by Brian Olson, who grew up in Snoqualmie. Specializing in tree services, fence ...
Earthscapes has been serving Woodinville and the surrounding areas since 2002, specializing in creating custom outdoor living spaces. As a licensed and insured landscaping company, we offer a full ran...
The People's Fence & More in Monroe, WA, started in 2019 by Jose Perez, is a small local business built on hands-on experience. With over seven years in the field, Jose began by struggling with fence ...
Rogue Fabricators
Rogue Fabricators Inc. is a custom metal fabrication company based in Poulsbo, WA. With over 15 years of experience, our industry-certified staff specializes in railings, structural, architectural, ar...
Estimated Fencing Costs in Artondale, WA
FAQs
How soon can a consultation be scheduled?
We dispatch from the Artondale Community Hall. A site visit is typically scheduled within 48 hours. The route uses WA-16 for access, with a standard 25-35 minute response window for consultations in the core Artondale area. This allows for an initial assessment of footing conditions, zoning compliance, and wind exposure on your specific lot.
Why do posts need to be set so deep in Artondale?
The 12-inch frost line depth dictates footing stability. Water in the soil freezes and expands, causing frost heave. Posts set above this line will lift and fail. Per IRC Section R403.1.4, all structural posts in Artondale Proper must extend below 12 inches to prevent movement. Shallow footings are a common failure point after winter.
What are the height and placement rules for my property?
Artondale zoning enforces a 4-foot height limit in front yards and 6 feet in rear yards. The 0-foot setback allows building directly on the property line. Critical for safety: corner lots have 'sight triangle' restrictions. Fences near intersections, especially those feeding WA-16, must be low-profile to maintain driver visibility. Violating these triangles creates a liability.
What is the first step before digging post holes?
You must call Washington 811. This free utility locate service marks public underground lines. Hitting a gas, water, or fiber line in Artondale Proper is a major financial and safety liability. We manage the process and concurrently file any required paperwork with the Pierce County permit office to ensure the project starts without legal or physical obstruction.
Is a standard fence strong enough for our wind?
No. The 110 MPH V-ult wind speed rating for the area dictates structural design. A fence built to ASCE 7-22 standards for this load requires specific post spacing, concrete footings, and wind-rated brackets. Standard 8-foot panel spacing often fails. Proper engineering accounts for peak storm season gusts, especially on lots with exposure from the Narrows.
How does local soil affect material choice?
Artondale's moderate soil corrosivity index and slight-to-moderate termite risk require compatible materials. Untreated wood in ground contact will decay. Use pressure-treated lumber rated for ground contact or corrosion-resistant metals. Fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks from forming on the finish, which is a common aesthetic failure.
Am I legally required to talk to my neighbor before a fence project?
Yes, for a shared or partition fence. RCW 16.60.020, the state's Good Neighbor Fence law, requires written notice to adjoining landowners in Artondale before replacing a boundary fence. As of 2026, this notification must include a good-faith estimate and proposed materials. Failure to provide notice can affect cost-sharing and lead to disputes.
Can I have a smart gate with a pool?
Yes, but integration is key. IRC Appendix AG (WAC 51-51) mandates self-closing, self-latching gates for pool enclosures. A 2026-compliant smart gate uses IoT sensors to confirm the latch is engaged and sends alerts. This dual function meets Washington's liability standards for access control while providing modern security logs for your Artondale home.
