Top Fencing Companies in Boulevard Park, WA, 98108 | Compare & Call
There are 24 fencing companies server in Boulevard Park WA
Absolute Fencing LLC is a licensed, bonded, and insured fencing contractor serving Granger, Yakima, Tri-Cities, and the Lower Valley. With over 12 years of experience, the company buys directly from m...
FenceWorks is a small, family-rooted fence and deck company serving Yakima, WA. With over 50 years of combined experience in residential and commercial fence building, we focus on custom wood and meta...
MB Construction serves Yakima, WA, specializing in masonry, concrete, fences, and gates. We tackle common local issues like chain link fence corrosion and fence post decay, which are prevalent due to ...
Since 1993, Mt Adams Fence has been a family-operated fencing company serving Yakima and all of Washington State. As chain link fence specialists, we focus on chain link, vinyl-coated chain link, and ...
The Hunny-Do Crew is a family-operated home services company based in Richland, WA, offering handyman, gutter services, and fences & gates. Licensed, bonded, and insured, they tackle everything on you...
R N R Fencing, based in Union Gap, Washington, has been the Yakima Valley's fence specialist since 1984. As a licensed, bonded, and insured contractor registered with the state, we provide both reside...
D&L Gates, based in Selah, WA, specializes in fence and gate installation, repair, and automation for residential and commercial properties. Serving the Selah community near landmarks like Selah City ...
NorthWest Fence and Contracting, owned by Richard R., has been serving the Yakima area for 15 years with expertise in fence and gate installation, repair, painting, and metal fabrication. Richard hold...
All Star Fencing Company, based in Yakima, WA, has been serving the community since 2000. With 8 years of hands-on experience in both residential and commercial fencing, we specialize in fence and gat...
Integrity Gates and Fencing, based in Yakima, WA, provides professional fence and gate services for residential, commercial, and industrial properties. We specialize in installing, repairing, painting...
Estimated Fencing Costs in Boulevard Park, WA
Questions and Answers
How soon can a project manager visit my property for an estimate?
We typically schedule site consultations within 48 hours. Our project manager will route from the Boulevard Park Library via WA-509, with an estimated 25-35 minute travel time to your location for an initial structural and zoning assessment.
Do I need to notify my neighbor before building a fence on our property line?
Yes. Under Washington's RCW 16.60.010 (the 'Good Neighbor' Fence Law), you must provide written notice to adjoining landowners before replacing or building a shared partition fence on the boundary. This is a strict 2026 legal requirement for any project on the property line in Boulevard Park.
Can I install an automated gate for my pool area?
Yes, but it must integrate with pool safety codes. Per IRC Appendix AG and King County Code 21A.12.040, pool barriers require self-closing, self-latching gates. Modern IoT gate systems with integrated latches meet these liability standards, aligning with the moderate smart-gate trend for Washington homeowners.
How deep should my fence posts go in Boulevard Park?
Fence posts in Boulevard Park require a 12-inch minimum footing depth to prevent frost heave. The IRC mandates footings extend below the local frost line. Posts set in shallow concrete will lift during winter freeze-thaw cycles, causing permanent structural failure.
What are the height and placement rules for a fence in my yard?
Boulevard Park zoning enforces a 4-foot height limit in front yards and a 6-foot limit in rear yards, with a 0-foot setback allowing construction directly on the property line. Corner lots must maintain clear 'sight triangles' at intersections; fencing near WA-509 must not obstruct driver visibility for traffic safety.
What fencing material holds up best against Boulevard Park's soil and pests?
Material compatibility is critical. With moderate soil corrosivity and termite risk, use pressure-treated wood rated for ground contact or vinyl composites. Employ hot-dip galvanized or stainless-steel fasteners to prevent rust streaks and ensure long-term stability against decay.
Is a standard fence strong enough for our local wind storms?
No. A 105 MPH V-ult ultimate wind speed rating dictates engineering. This wind load requires reduced post spacing (often 6 feet on-center maximum), concrete footings, and wind-rated brackets to resist overturning. Standard 'big-box' fence panels often fail during our peak storm season gusts.
What is the first physical step before digging fence post holes?
Call Washington 811 for a utility locate at least two business days before excavation. Hitting a buried line in Boulevard Park carries major liability for repair costs and service disruption. A professional crew manages this call and all associated City of Seattle permit office paperwork to keep the project compliant.
