Top Fencing Companies in Fife, WA, 98424 | Compare & Call

There are 238 fencing companies server in Fife WA

Reliable Fencing

Reliable Fencing

★★★★☆ 4.1 / 5 (8)
Kent WA 98031
Fences & Gates

Reliable Fencing in Kent, WA, is led by Kenneth Holthaus, a passionate fence builder with over five years of experience in both residential and commercial fencing. Kenneth started the company in July ...

FlemingWay Construction

FlemingWay Construction

★★★★★ 5.0 / 5 (2)
Maple Valley WA 98038
Fences & Gates, General Contractors, Decks & Railing

FlemingWay Construction LLC is a family-owned business based in Maple Valley, WA, serving the Pacific Northwest. We focus on turning your ideas into reality through honest, transparent work and strong...

King's Construction General

King's Construction General

★★★★☆ 4.0 / 5 (1)
Renton WA 98056
Fences & Gates, Painters, Roofing

King's Construction General, based in Renton, WA, specializes in fencing, painting, and roofing services. With Renton's wet climate, wood fence rot is a common problem affecting aging fence systems. W...

PNW Solutions & Services

PNW Solutions & Services

★★★★★ 5.0 / 5 (2)
Montesano WA 98563
Pressure Washers, Fences & Gates, Gutter Services

For 25 years, PNW Solutions & Services has been a trusted licensed home services company in Montesano, WA, specializing in exterior cleaning, pressure washing, and structural enhancements. Based near ...

BFD Construction

BFD Construction

★★★★★ 5.0 / 5 (1)
Snoqualmie WA 98065
Fences & Gates, Decks & Railing, General Contractors

BFD Construction is a licensed and insured general contractor based in Snoqualmie, WA, serving Seattle and surrounding areas. We specialize in fences, gates, decks, railings, roofing, and outdoor stru...

Decks Restore

Decks Restore

★★★★★ 5.0 / 5 (3)
33530 1st Way S Ste 102, Federal Way WA 98003
Decks & Railing, Fences & Gates

Decks Restore in Federal Way, WA, is a licensed custom deck builder and deck resurfacing specialist with over 20 years of experience. We provide a full range of services including deck construction, d...

Bash Solutions

Bash Solutions

★★★★★ 5.0 / 5 (4)
11821 SE 233rd Pl, Kent WA 98031
Handyman, Fireplace Services, Fences & Gates

Bash Solutions, founded in 2024 by Dmytro, offers reliable home maintenance and repair services to homeowners, property managers, and small businesses in Kent, WA, and the greater Pierce County area. ...

Cesar's Construction

Cesar's Construction

★★★★★ 5.0 / 5 (1)
Kent WA 98032
Fences & Gates, Decks & Railing, General Contractors

Cesar's Construction is a trusted general contractor serving Kent, WA, specializing in fences, gates, decks, and home remodeling. For Kent homeowners dealing with leaning fence posts or misaligned fen...

N&D Fence and Deck

N&D Fence and Deck

★★★★★ 5.0 / 5 (2)
Covington WA 98042
Decks & Railing, Fences & Gates

N&D Fence and Deck is a family-oriented company serving Covington, WA, with over 12 years of experience in construction. We specialize in building, repairing, and replacing decks, fences, and gates, o...

Milam Fencing

Milam Fencing

★★★★★ 5.0 / 5 (2)
23411 196th Ave SE, Maple Valley WA 98038
Fences & Gates, Landscaping, Decks & Railing

Milam Fencing has been serving the Maple Valley area as a licensed fence contractor, specializing in the installation of residential and commercial fences as well as automated gates. Their team brings...



Estimated Fencing Costs in Fife, WA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $489
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$49 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,299 - $1,739

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Fife. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

Am I legally required to talk to my neighbor before replacing our shared fence?

Yes. Washington's 'Good Neighbor Fence Act' (RCW 16.60.010) creates specific obligations for shared boundary lines, known as partition fences. In Fife, you must provide written notice to the adjoining owner before construction or replacement. Failure to comply can affect cost-sharing and lead to disputes. This is a strict liability statute, not a courtesy.

What fence material lasts longest in Fife's soil?

Material longevity depends on corrosion and pest resistance. Fife has low-to-moderate soil corrosivity and slight-to-moderate termite risk. Pressure-treated wood must be ground-contact rated. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks. Aluminum or vinyl are low-maintenance but must be engineered for the 110 MPH wind zone. Always specify corrosion-resistant brackets.

Can I have a smart, automated gate if I have a pool?

Yes, but integration is key. Washington enforces the IBC/IRC Appendix AG pool barrier code, requiring self-closing, self-latching gates. A modern IoT gate operator must integrate with a certified latch mechanism. The moderate smart-gate trend in 2026 focuses on systems that log access attempts and provide remote status alerts, meeting both security and liability standards for WA homeowners.

Why are my neighbor's fence posts failing, but mine are solid?

Post failure in Fife Heights is a classic frost heave issue. The IRC mandates footings extend below the local 12-inch frost line. Posts set in shallow concrete will lift during freeze-thaw cycles, causing racking and collapse. Proper engineering for 110 MPH V-ult wind loads also requires deeper, bell-bottom footings to resist overturning forces from I-5 corridor gusts.

What is the most critical step before digging fence post holes?

Call Washington 811 for a utility locate. Hitting a buried gas, electric, or fiber line in Fife Heights is a major liability causing service outages and massive repair bills. The service marks public lines; private irrigation or lighting requires private locates. We manage the Fife permit office paperwork concurrently, ensuring the site plan meets zoning before the first hole is dug.

How high can I build my fence in my front yard?

Fife zoning limits front yard fences to 3 feet and rear/side yard fences to 6 feet. The 0-foot setback allows building directly on the property line. Critical for corner lots: you must maintain a clear 'sight triangle' at intersections. Fences near the I-5 on-ramps cannot obscure driver visibility. The City enforces this for traffic safety, requiring lower, open-design fencing in these zones.

Will a standard prefab fence survive a windstorm here?

Unlikely without modification. The 110 MPH V-ult wind speed rating dictates structural design. Prefab panels often have weak post-to-rail connections and wide post spacing. To survive peak storm season gusts, engineering per ASCE 7-22 standards is required. This typically means 4x4 posts at 6-foot centers, concrete footings below frost, and wind-rated metal brackets, not just nails.

How soon can you start a fencing project in Fife?

Consultation typically occurs within 24-48 hours. Our route from Fife City Hall via I-5 to Fife Heights ensures a 15-25 minute response. The start date depends on material lead times and the permit review cycle. With pre-approval of plans, site prep can begin immediately after the 811 locate marks are confirmed and the permit is issued.



Scroll to Top
CALL US NOW