Top Fencing Companies in Fox Island, WA, 98333 | Compare & Call
There are 239 fencing companies server in Fox Island WA
A & J Hardscape Paver LLC is a local family-owned and operated business serving Belfair and the surrounding areas. We specialize in a full range of masonry, concrete, landscaping, and fence services f...
Evola Builds is a locally owned and operated general contracting company based in Poulsbo, Washington, serving all of Kitsap County. We specialize in residential and light commercial construction, inc...
Porcella's Iron & Woodworks
Haydon Porcella is the sole operator of Porcella's Iron & Woodworks, a metal fabrication and fencing business based on Bainbridge Island, WA. With over 25 years of professional experience in welding a...
Cougar Ridge Construction
Cougar Ridge Construction is a family-owned general contracting business serving Port Townsend, WA, with 32 years of hands-on experience. We specialize in new home construction, complete remodels, kit...
MCS Roofing And Construction is a family-owned and operated business based in Lynnwood, WA, established in 2015. Our team brings over 20 years of combined experience in roofing and remodeling, holding...
Sial Construction is a general contracting company serving homeowners in Lynnwood and the North Seattle area. We specialize in building custom decks, durable fences and gates, patios, and other outdoo...
Timely Built Services, based in Brier, WA, is a licensed, bonded, and insured general contractor with years of hands-on experience in kitchen, bath, and whole-home remodels. Whether you need a small r...
Shane's Handy in Brier, WA offers over 15 years of experience as a licensed and insured handyman serving Snohomish County. Specializing in deck construction and repair, fence and gate installation, ki...
Medina Company is a family-owned business serving King County and Snohomish County from its base in Monroe, WA. Since 2020, we have specialized in concrete, landscaping, fencing, and pavers for both r...
Evergreen Martinez Landscaping, serving Monroe, WA, provides comprehensive outdoor solutions including landscaping, irrigation, and fence and gate services. They specialize in designing and building f...
Estimated Fencing Costs in Fox Island, WA
Questions and Answers
How is a fence engineered to withstand Fox Island's wind loads?
The design wind speed is 105 MPH V-ult. This engineering value, per ASCE 7-22 standards, dictates post spacing, concrete footing mass, and bracket strength. Fences in exposed areas must be designed to resist peak storm season gusts, which are channeled by the topography around the island.
Why do fence posts in Fox Island require deeper footings than other areas?
The frost line depth in Fox Island Proper is 12 inches. Posts not set below this line are subject to frost heave, which lifts footings and destroys alignment. We engineer all posts to a minimum of 24 inches, exceeding IRC standards, to prevent the seasonal failure common in this neighborhood.
What is the typical timeline for a consultation and project start?
After initial contact, we schedule a site consultation. Our standard route from the Fox Island Bridge via SR-16 results in a 35-45 minute travel time to most island properties. With permits and materials secured, project starts are typically scheduled within 2-3 weeks, contingent on the current labor rate of approximately $45/hour.
How can a smart gate improve safety and meet local codes?
A smart gate with an integrated IoT latch provides automated closure and remote monitoring. This directly supports compliance with Pierce County Code 17C.60.250, which mandates self-closing, self-latching devices for pools. The moderate trend toward smart-gate integration in 2026 reflects a move to reduce liability through technology.
What are my legal obligations to neighbors when building a fence on Fox Island?
RCW 16.60.010, the state's 'good neighbor' law, requires written notice to adjoining owners before replacing a shared partition fence. Since 2026, Fox Island has enforced a specific requirement for certified mail notification. Failure to comply can result in shared cost disputes and delays.
What fencing materials are best suited for Fox Island's environment?
Material selection must account for the moderate soil corrosivity index and slight to moderate termite risk. Pressure-treated wood or composite materials are standard. We specify hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from salt-air exposure near the Fox Island Bridge.
What are the height and setback rules for fences on Fox Island?
Fox Island zoning limits fences to 3 feet in front yards and 6 feet in rear yards. A 0-foot setback is allowed on the property line only with written consent from the adjacent owner. For corner lots, a clear 'sight triangle' must be maintained for driver visibility, a critical safety measure near the high-speed SR-16 corridor.
What preparation is required before digging fence post holes?
You must call Washington 811 at least two business days before excavation. Hitting an unmarked utility line in Fox Island Proper is a major liability that can lead to service outages and fines. We manage the Pierce County permit office paperwork concurrently to ensure all documentation is in order before the first post is set.
