Top Fencing Companies in Kittitas, WA, 98934 | Compare & Call
There are 167 fencing companies server in Kittitas WA
Wiest Coast General Contracting
Wiest Coast General Contracting, based in Spanaway, WA, brings over 10 years of construction trade experience to Pierce County and surrounding areas. Founded with a vision of serving our community wit...
Leyva Fencing, based in Buckley, WA, is a licensed and bonded fencing company serving both residential and agricultural properties. We specialize in installing, repairing, painting, staining, and weat...
Grit City GC is a trusted general contractor serving Tukwila, WA, and nearby neighborhoods like Foster and Riverton Heights. We specialize in bathroom remodeling, building additions, deck construction...
Security Contractor Services, Inc. (SCS) was founded in 1977 to manage the wholesale and temporary fence rental operations of San Jose Steel Co.'s Fence Division, a leading chain link fence installer ...
Evergreen Legacy Builders
Evergreen Legacy Builders LLC, based in Bothell, WA, transforms outdoor spaces with a focus on durability and craftsmanship. We handle a full range of services including lawn and landscape work, drive...
TotalFix Contractors LLC is a locally owned, licensed, bonded, and insured team serving Bothell and the Greater Seattle area. We specialize in foundation repair, fence installation, concrete work, and...
Sapphire Solutions serves homeowners in Edmonds, WA, specializing in deck construction, repair, and replacement. The constant moisture in the Pacific Northwest often leads to wood rot and loose rails ...
Anaya's Quality Painting
Anaya's Quality Painting, based in Lynnwood, WA, is a full-service painting and general contracting company serving Seattle and surrounding areas. We specialize in interior and exterior painting, as w...
NW Pro Construction, based in Bellevue, WA, has been transforming residential and commercial spaces since 1999. With decades of experience, the company specializes in a comprehensive range of services...
Culver Land Construction serves La Conner, WA, offering excavation, tree services, and fencing solutions. Located near Maple Hall and the Skagit River, the company helps local homeowners with common f...
Estimated Fencing Costs in Kittitas, WA
Frequently Asked Questions
How is my fence designed for Kittitas's high winds?
The 105 MPH V-ult wind speed governs engineering. This 'ultimate design wind speed' from ASCE 7-22 standards dictates post spacing, concrete footing size, and bracket strength. Fences in Downtown Kittitas, with exposure from I-90 corridors, require reinforced corner posts and continuous rail bracing to survive peak storm season gusts without panel failure.
What are the critical steps before digging fence post holes?
You must call Washington 811 at least two business days before digging. Hitting a utility line in Downtown Kittitas carries major liability for repair costs and service disruption. After clear marks are received, we file the standard permit with the Kittitas permit office, which requires the site plan, 811 clearance, and engineering details for review.
How deep should my fence posts be set in Downtown Kittitas?
Posts must be set at least 24 inches deep, below the local frost line. Frost heave from Kittitas's freeze-thaw cycles will lift and crack posts set in shallow footings. The IRC requires footings to extend a minimum of 12 inches below undisturbed earth and below the frost line. For the 105 MPH V-ult wind rating here, we often engineer deeper footings for lateral stability.
Am I legally required to notify my neighbor before building a fence on the property line?
Yes. Washington's 'Good Neighbor Fence Law' (RCW 16.60.010) requires written notice to adjoining owners before replacing a shared partition fence. In Kittitas, this 2026 standard mandates providing a good faith estimate and proposal 30 days prior to work. Failure to comply can affect cost-sharing rights and lead to disputes.
What fence materials hold up best to Kittitas soil and pests?
With low to moderate soil corrosivity and slight termite risk, pressure-treated wood, vinyl, and aluminum are viable. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks. Avoid untreated wood in ground contact. For wood posts, consider a gravel base for drainage to mitigate the moderate corrosion index.
Can I install a smart gate on a pool fence and meet code?
Yes, if integrated correctly. The IBC/IRC Appendix AG pool safety code requires self-closing, self-latching gates. Modern IoT gate operators can meet this standard with automated closing cycles and monitored latch sensors. This combination addresses the moderate smart-gate trend in WA while fulfilling liability requirements for a secured barrier.
What are the height and placement rules for a fence in Kittitas?
Kittitas zoning limits fences to 3 feet in front yard setbacks and 6 feet in rear yards. A 0-foot setback is allowed on the property line. For corner lots near I-90, you must maintain a clear 'sight triangle' at intersections—typically a 10-foot area from the property corner free of visual obstructions over 3 feet high. This is critical for driver visibility.
How soon can a consultant visit my property for an estimate?
We typically schedule consultations within 48 hours. From our staging area near Kittitas City Park, the route via I-90 to most Downtown properties allows for a 15-20 minute response. We confirm the site address, utility mark status, and your zoning lot type before the visit to provide an accurate, on-site scope.