Top Fencing Companies in Maple Valley, WA, 98038 | Compare & Call

There are 238 fencing companies server in Maple Valley WA

Sambani Build

Sambani Build

Port Townsend WA 98368
General Contractors, Fences & Gates, Decks & Railing

Sambani Build is a trusted general contractor serving Port Townsend, WA, specializing in fences, gates, decks, and building additions. Located near the historic Uptown district and just minutes from F...

Coastal Deck & Patio

Coastal Deck & Patio

5506 Kingsway, Anacortes WA 98221
Fences & Gates, Masonry/Concrete, Decks & Railing

Based in Anacortes, WA, Coastal Deck & Patio specializes in deck construction, repair, and replacement, as well as fences, gates, and masonry/concrete work. For local homeowners near Cap Sante or the ...

Aumick Design NW

Aumick Design NW

Stanwood WA 98282
General Contractors, Handyman, Fences & Gates

Aumick Design NW is a trusted general contractor serving homeowners in Stanwood, WA, and the surrounding areas. With expertise in home construction, remodeling, and fencing, they address common local ...

Bayside Landscape & Pruning

Bayside Landscape & Pruning

★★★★☆ 3.9 / 5 (8)
Sequim WA 98382
Tree Services, Landscaping, Fences & Gates

Bayside Landscape & Pruning is a licensed and bonded full-service landscaping company serving Sequim, WA and all of Clallam County. The team provides comprehensive landscape design, construction, and ...

A Plus Property Solutions

A Plus Property Solutions

1941 Jefferson St, Port Townsend WA 98368
General Contractors, Painters, Fences & Gates

A Plus Property Solutions is a trusted general contractor based in Port Townsend, WA, serving homeowners, landlords, and property managers across Jefferson County. We specialize in interior and exteri...

Jc Home Maintenance

Jc Home Maintenance

Stanwood WA 98292
Pressure Washers, Landscaping, Fences & Gates

JC Home Maintenance is a local service provider in Stanwood, WA, specializing in pressure washing, landscaping, and fence and gate repairs. For Stanwood homeowners, common problems like fence mold gro...

Washburn Built

Washburn Built

Port Angeles WA 98362
General Contractors, Fences & Gates, Decks & Railing

Washburn Built is a general contractor in Port Angeles, WA, specializing in fences & gates, decks & railing, and full home remodeling. With the Olympic Peninsula's constant moisture, wood fence rot an...

Dunn Services

Dunn Services

Lopez Island WA 98261
Lawn Services, Fences & Gates, Excavation Services

Dunn Services is a trusted provider of lawn care, excavation, and fencing solutions for homeowners on Lopez Island, WA. Serving neighborhoods like Port Stanley and near the Lopez Village, the company ...

« Previous PagePage 24 of 24Next »


Estimated Fencing Costs in Maple Valley, WA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $489
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$49 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,299 - $1,739

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Maple Valley. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

What is the legal requirement for notifying a neighbor before fence work?

RCW 16.60.010, the 'Good Neighbor' law, requires written notice to adjoining property owners before altering a shared partition fence. In Maple Valley, this is a strict 2026 procedural requirement for any boundary work. Failure to provide notice can result in liability for damages.

Why do posts in Maple Valley Town Center fail without proper footings?

The 12-inch frost line depth mandates post footings extending below this level. Posts set above the frost line heave upward during freeze-thaw cycles, compromising structural integrity. Compliance with IRC R403.1.4 for frost-protected shallow foundations prevents this failure in Maple Valley.

How soon can a consultation be scheduled in Maple Valley?

A site consultation typically dispatches from the Lake Wilderness Park area. The route via WA-169 allows for a 25-35 minute response window to most Maple Valley Town Center locations, pending traffic. Scheduling depends on current permit review timelines and crew availability.

What is the process for utility location before digging?

Call Washington 811 at least two full business days before excavation. They mark all public underground lines. Hitting an unmarked line in Maple Valley Town Center creates major liability and repair costs. This step is mandatory before the city permit office will issue a construction permit.

How do modern pool fences meet Washington safety codes?

IBC/IRC Appendix AG mandates a 48-inch minimum height with self-closing, self-latching gates. Modern systems integrate IoT latches that log access and send tamper alerts, satisfying both the code and current liability standards for Washington homeowners. This smart-gate trend enhances compliance monitoring.

How does the 105 MPH V-ult wind speed rating affect a fence design?

A 105 MPH V-ult wind speed, per ASCE 7-22 standards, dictates post spacing, embedment depth, and bracket strength. Fences in Maple Valley require closer post spacing and continuous concrete footings to resist overturning moments during peak storm season gusts from the south and southwest.

What are the height limits for a fence on a corner lot near WA-169?

Zoning limits are 4 feet for the front yard and 6 feet for the rear. A corner lot also has a 'sight triangle' regulation. This zone, typically 10-15 feet from the property corner at the intersection, prohibits any fence over 3 feet high to maintain driver visibility near high-traffic corridors like WA-169.

What fencing materials hold up best in Maple Valley soil?

Low to moderate soil corrosivity and a slight to moderate termite risk favor pressure-treated wood with stainless steel or hot-dipped galvanized fasteners. These fasteners prevent rust streaks. Avoid ferrous metals in direct ground contact and specify termite-resistant treatments for any wood components.



Scroll to Top
CALL US NOW