Top Fencing Companies in Marysville, WA, 98205 | Compare & Call

There are 230 fencing companies server in Marysville WA

Premier Fence

Premier Fence

★★★★☆ 4.3 / 5 (4)
4508 136th St NE, Marysville WA 98271
Fences & Gates

Premier Fence, a family-operated company since 1975, provides expert fence and gate services to Marysville and surrounding areas in Snohomish and Skagit Counties, including Camano Island. We specializ...

PNW Craft Construction

PNW Craft Construction

★★★★★ 5.0 / 5 (1)
5533 Seahurst Ave, Everett WA 98203
Cabinetry, Decks & Railing, Fences & Gates

PNW Craft Construction, based in Everett, WA, was founded on a commitment to honest, quality work at fair prices. We specialize in custom cabinetry, decks, fences, and gates, serving Snohomish County ...

Alpha & Omega Construction

Alpha & Omega Construction

★★★★★ 4.6 / 5 (9)
Federal Way WA 98023
General Contractors, Decks & Railing, Fences & Gates

Alpha & Omega Construction, based in Federal Way, WA, offers affordable elegance for home improvements. As a general contractor, we specialize in decks, fences, gates, and remodeling—from balcony addi...

Fence Doctor

Fence Doctor

★★★★☆ 3.8 / 5 (12)
3800 Bridgeport Way W Ste A-207, University Place WA 98466
Fences & Gates

Fence Doctor provides expert fence and gate services to homeowners in University Place, WA. We understand that our local weather and soil conditions can lead to common issues like privacy fence panel ...

JC Fencing

JC Fencing

Tacoma WA 98418
Fences & Gates

JC Fencing, serving the Tacoma, WA area, specializes in the installation and repair of fences and gates. A common issue local homeowners face is fence alignment problems and warped fence boards, often...

Landscape Creations

Landscape Creations

★★★★★ 5.0 / 5 (1)
Tacoma WA 98416
Masonry/Concrete, Fences & Gates, Landscaping

Landscape Creations is a family-owned business based in Tacoma, WA, with over 16 years of experience in construction. We specialize in transforming ordinary properties into beautiful, picturesque land...

Guard Bear

Guard Bear

★★★★★ 5.0 / 5 (1)
Kirkland WA 98034
Fences & Gates, Garage Door Services, Security Systems

Guard Bear Automated Electric Gates Company was born from a childhood spent in my father’s electronics workshop, where I learned to build and repair circuits. Founded in 1999, we’ve been providing sec...

Coal Tech

Coal Tech

Federal Way WA 98023
Metal Fabricators, General Contractors, Fences & Gates

Coal Tech LLC, based in Federal Way, WA, specializes in metal fabrication, general contracting, and fence and gate services. Founded in March 2017 by a former college welding instructor, the company b...

Domingo’s Landscaping

Domingo’s Landscaping

★★★★★ 5.0 / 5 (2)
Belfair WA 98528
Landscaping, Irrigation, Fences & Gates

Domingo’s Landscaping in Belfair, WA, has been serving the community for over six years with a complete range of outdoor services. We handle everything from annual and bi-annual yard cleanups to overg...

Seattle Fence and Decks

Seattle Fence and Decks

★★★★★ 5.0 / 5 (1)
Seattle WA 98116
Decks & Railing, Fences & Gates, Patio Coverings

For over 20 years, Seattle Fence and Decks has been a trusted local expert for custom decks, fencing, and outdoor living projects across the greater Seattle area. We specialize in building durable, be...



Estimated Fencing Costs in Marysville, WA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $489
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$49 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,299 - $1,739

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Marysville. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

Am I legally required to notify my neighbor before building a fence?

Yes, for any shared boundary. Washington's Good Neighbor Fence Law (RCW 16.60.010) mandates written notice to adjoining landowners before replacing or building a partition fence. In Marysville, failure to provide this 15-day notice in 2026 can result in liability for all construction costs. This law governs shared financial responsibility and prevents neighborhood disputes.

How deep should my fence post footings be in Marysville?

Footings must extend below the 12-inch frost line. The IRC requires this to prevent frost heave, which lifts posts and destroys fence alignment. In Downtown Marysville, shallow posts will fail within two winters due to freeze-thaw cycles in the soil. Use concrete footings that are 12 inches in diameter and extend at least 36 inches deep for a 6-foot post to ensure stability.

What fence materials work best with Marysville soil?

Choose materials for moderate soil corrosivity and slight to moderate termite risk. Pressure-treated pine is standard, but use stainless steel or hot-dip galvanized fasteners to prevent rust streaks. For vinyl, ensure posts are rated for ground contact. Avoid untreated wood in direct soil contact. Composite materials offer high resistance but require specific UV-stabilized formulations for long-term performance.

How soon can a consultant visit my property?

A structural consultation can be scheduled within 48 hours. The standard route from Cedarcrest Golf Course uses I-5 for direct access to Downtown Marysville. Accounting for traffic patterns, the estimated travel time for an on-site assessment is 25 to 35 minutes. The consultation includes a site survey, wind exposure evaluation, and a review of zoning compliance for your specific lot.

Can I install a smart gate for my pool?

Yes, but it must comply with the 2026 IBC/IRC Appendix AG pool safety code. The gate must self-close and self-latch to a height of at least 48 inches. Modern IoT-integrated latches can meet this standard, providing audit trails and remote status checks. This integration is a moderate trend in Washington, as it helps homeowners demonstrate due diligence and manage liability for unauthorized access.

Is my fence designed for local wind loads?

Fences in Marysville must be engineered for a V-ult wind speed of 105 MPH. This ultimate design wind speed dictates post spacing, concrete footing mass, and bracket strength. A 6-foot solid panel fence requires posts set 8 feet on-center or less with proper bracing to survive peak storm season gusts, especially in exposed areas near Cedarcrest Golf Course. Non-compliant designs will fail.

What are the critical steps before digging fence post holes?

First, call Washington 811 at least two business days before excavation. They mark public utility lines. Hitting a gas or fiber line in Downtown Marysville carries major liability and repair costs. Second, secure a permit from the City of Marysville Planning Department. The permit office requires a site plan showing the fence location, height, and materials. Managing this paperwork upfront prevents work stoppages and fines.

What are the height and setback rules for a Marysville fence?

Zoning limits are 4 feet in front yards and 6 feet in rear yards. A 0-foot setback is permitted on side and rear property lines. For corner lots, a visibility 'sight triangle' is enforced. Any fence within 30 feet of the intersection of two streets must be under 3 feet tall. This is critical for safety near high-traffic areas like I-5. Always verify your lot lines with a survey before construction.



Scroll to Top
CALL US NOW