Top Fencing Companies in Marysville, WA, 98205 | Compare & Call

There are 230 fencing companies server in Marysville WA

Reliable Fencing

Reliable Fencing

★★★★☆ 4.1 / 5 (8)
Kent WA 98031
Fences & Gates

Reliable Fencing in Kent, WA, is led by Kenneth Holthaus, a passionate fence builder with over five years of experience in both residential and commercial fencing. Kenneth started the company in July ...

FlemingWay Construction

FlemingWay Construction

★★★★★ 5.0 / 5 (2)
Maple Valley WA 98038
Fences & Gates, General Contractors, Decks & Railing

FlemingWay Construction LLC is a family-owned business based in Maple Valley, WA, serving the Pacific Northwest. We focus on turning your ideas into reality through honest, transparent work and strong...

EDN Home Improvement

EDN Home Improvement

★★★★★ 5.0 / 5 (1)
Bothell WA 98011
Roofing, Decks & Railing, Fences & Gates

EDN Home Improvement LLC is a licensed home improvement company based in Bothell, WA, specializing in roofing, decks, fences, and gates. With a focus on quality craftsmanship and customer satisfaction...

Calel’s Landscape

Calel’s Landscape

★★★★★ 5.0 / 5 (2)
Seattle WA 98168
Landscaping, Fences & Gates, Artificial Turf

Calel’s Landscape serves homeowners across Seattle, WA, specializing in landscaping, fences, gates, and artificial turf. Based near the Ballard neighborhood and just minutes from Green Lake, the team ...

ZFC Landscaping

ZFC Landscaping

★★★★★ 4.8 / 5 (4)
18621 Blueberry Ln, Monroe WA 98272
Fences & Gates, Masonry/Concrete, Landscaping

ZFC Landscaping, based in Monroe, WA, has been serving the community since 2012. Founded by Oscar, who brings over 15 years of hands-on industry experience, the company operates as a family-run genera...

Mt Si Contracting

Mt Si Contracting

★★★★★ 5.0 / 5 (1)
Snoqualmie WA 98065
Fences & Gates, Decks & Railing

Mt Si Contracting specializes in outdoor wooden structures such as decks, fences, gates, and pergolas for residents in Snoqualmie, WA. The company uses materials like cedar and composite decking, desi...

Bergquist Designers & Builders

Bergquist Designers & Builders

★★★★★ 5.0 / 5 (1)
5907 237th St SW, Mountlake Terrace WA 98043
General Contractors, Decks & Railing, Fences & Gates

Bergquist Designers & Builders, based in Mountlake Terrace, WA, has been delivering quality construction since the early 1980s. Founded in Washington, the business expanded to include over a decade of...

PNW Solutions & Services

PNW Solutions & Services

★★★★★ 5.0 / 5 (2)
Montesano WA 98563
Pressure Washers, Fences & Gates, Gutter Services

For 25 years, PNW Solutions & Services has been a trusted licensed home services company in Montesano, WA, specializing in exterior cleaning, pressure washing, and structural enhancements. Based near ...

BFD Construction

BFD Construction

★★★★★ 5.0 / 5 (1)
Snoqualmie WA 98065
Fences & Gates, Decks & Railing, General Contractors

BFD Construction is a licensed and insured general contractor based in Snoqualmie, WA, serving Seattle and surrounding areas. We specialize in fences, gates, decks, railings, roofing, and outdoor stru...

Vanwest Construction

Vanwest Construction

★★★★★ 5.0 / 5 (1)
Snohomish WA 98290
Fences & Gates, Masonry/Concrete, Excavation Services

Vanwest Construction, based in Snohomish, WA, is a small family-owned company that brings over a decade of experience to residential and equestrian projects. We specialize in building and maintaining ...



Estimated Fencing Costs in Marysville, WA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $489
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$49 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,299 - $1,739

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Marysville. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

Am I legally required to notify my neighbor before building a fence?

Yes, for any shared boundary. Washington's Good Neighbor Fence Law (RCW 16.60.010) mandates written notice to adjoining landowners before replacing or building a partition fence. In Marysville, failure to provide this 15-day notice in 2026 can result in liability for all construction costs. This law governs shared financial responsibility and prevents neighborhood disputes.

How deep should my fence post footings be in Marysville?

Footings must extend below the 12-inch frost line. The IRC requires this to prevent frost heave, which lifts posts and destroys fence alignment. In Downtown Marysville, shallow posts will fail within two winters due to freeze-thaw cycles in the soil. Use concrete footings that are 12 inches in diameter and extend at least 36 inches deep for a 6-foot post to ensure stability.

What fence materials work best with Marysville soil?

Choose materials for moderate soil corrosivity and slight to moderate termite risk. Pressure-treated pine is standard, but use stainless steel or hot-dip galvanized fasteners to prevent rust streaks. For vinyl, ensure posts are rated for ground contact. Avoid untreated wood in direct soil contact. Composite materials offer high resistance but require specific UV-stabilized formulations for long-term performance.

How soon can a consultant visit my property?

A structural consultation can be scheduled within 48 hours. The standard route from Cedarcrest Golf Course uses I-5 for direct access to Downtown Marysville. Accounting for traffic patterns, the estimated travel time for an on-site assessment is 25 to 35 minutes. The consultation includes a site survey, wind exposure evaluation, and a review of zoning compliance for your specific lot.

Can I install a smart gate for my pool?

Yes, but it must comply with the 2026 IBC/IRC Appendix AG pool safety code. The gate must self-close and self-latch to a height of at least 48 inches. Modern IoT-integrated latches can meet this standard, providing audit trails and remote status checks. This integration is a moderate trend in Washington, as it helps homeowners demonstrate due diligence and manage liability for unauthorized access.

Is my fence designed for local wind loads?

Fences in Marysville must be engineered for a V-ult wind speed of 105 MPH. This ultimate design wind speed dictates post spacing, concrete footing mass, and bracket strength. A 6-foot solid panel fence requires posts set 8 feet on-center or less with proper bracing to survive peak storm season gusts, especially in exposed areas near Cedarcrest Golf Course. Non-compliant designs will fail.

What are the critical steps before digging fence post holes?

First, call Washington 811 at least two business days before excavation. They mark public utility lines. Hitting a gas or fiber line in Downtown Marysville carries major liability and repair costs. Second, secure a permit from the City of Marysville Planning Department. The permit office requires a site plan showing the fence location, height, and materials. Managing this paperwork upfront prevents work stoppages and fines.

What are the height and setback rules for a Marysville fence?

Zoning limits are 4 feet in front yards and 6 feet in rear yards. A 0-foot setback is permitted on side and rear property lines. For corner lots, a visibility 'sight triangle' is enforced. Any fence within 30 feet of the intersection of two streets must be under 3 feet tall. This is critical for safety near high-traffic areas like I-5. Always verify your lot lines with a survey before construction.



Scroll to Top
CALL US NOW