Top Fencing Companies in Pasco, WA, 99301 | Compare & Call
There are 233 fencing companies server in Pasco WA
Green Place Landscaping is a Tacoma-based company owned by Macario, who brings 8 years of hands-on experience in landscaping, fence and gate installation, and tree services. We are licensed, bonded, a...
All Around Fence Co has been serving Lakewood and the broader King and Pierce Counties since 1992. As a locally owned and operated fence contractor, we install and repair a wide range of fencing mater...
Majestic Fence & Decking serves Auburn, WA, providing expert fence and gate, deck, and railing services. Local homeowners often face aging fence systems and loose fence rails, which can compromise pro...
Fence and Tree Service by Ramos has been serving Tacoma, WA and the surrounding areas with a comprehensive range of outdoor property services. We combine fence installation, tree care, and excavation ...
Guard Bear Automated Electric Gates Company was born from a childhood spent in my father’s electronics workshop, where I learned to build and repair circuits. Founded in 1999, we’ve been providing sec...
Fencologists in Tacoma, WA, is a team of dedicated builders with over 40 years of combined experience in crafting quality fences and decks. As licensed, bonded, and insured general contractors, we spe...
Beach Bros Fence, led by Tommy, serves Tacoma, WA, with custom fence and gate solutions that prioritize quality and durability. Unlike many contractors who rely on pre-made panels, Beach Bros Fence bu...
Coal Tech LLC, based in Federal Way, WA, specializes in metal fabrication, general contracting, and fence and gate services. Founded in March 2017 by a former college welding instructor, the company b...
FineLine Fencing provides expert fence and gate services to Tacoma, WA, addressing common local problems like privacy fence panel damage and rusting hardware. Located near the Tacoma Dome and Proctor ...
Carrillo's Landscaping, based in Shelton, WA, is a licensed and bonded company with over five years of hands-on experience serving the local community. We specialize in a comprehensive range of servic...
Estimated Fencing Costs in Pasco, WA
Common Questions
Why do I need deep concrete footings for my fence posts in Pasco?
The IRC requires fence post footings to extend below the local frost line. Pasco's 24-inch frost depth means soil freezes and expands each winter. Posts set above this line will be forced upward by frost heave, causing misalignment and failure. Proper footings below 24 inches provide permanent stability.
Am I required to notify my neighbor before building a fence in Pasco?
Yes. Washington's Good Neighbor Fence Act (RCW 16.60.020) requires written notice to adjoining landowners at least 30 days before replacing or altering a shared partition fence. In Pasco, this 2026 legal requirement also allows for cost-sharing agreements. Failure to notify can result in liability.
How soon can you provide a consultation and estimate?
We typically dispatch for a site consultation within 48 hours. Our route from Pasco City Hall via US-395 to most Downtown Pasco properties results in a 15-20 minute response time. The consultation includes a zoning review, wind load assessment, and material compatibility analysis, with a detailed quote provided within 24 hours.
Can a smart gate meet pool safety codes?
Yes. Modern IoT-integrated gate systems with automatic self-closing and latching mechanisms can be engineered to meet the IBC/IRC Appendix AG pool barrier code. These systems provide the required 48-inch minimum height and positive latching, while audit logs from smart locks offer liability protection for Washington homeowners.
What fencing materials hold up best to Pasco's soil and pests?
Pasco's moderate soil corrosivity index requires G90 galvanized steel fasteners and posts to prevent rust streaks. With a slight to moderate termite risk, pressure-treated wood or composite materials are advised. Avoid untreated wood in direct ground contact. Material compatibility between posts, fasteners, and panels prevents premature failure.
How do you design a fence to withstand Tri-Cities wind storms?
Pasco's 105 MPH V-ult wind speed rating dictates the structural design. This engineering standard requires closer post spacing (often 6 feet on-center or less), deeper concrete footings, and wind-rated brackets. A fence built to ASCE 7-22 standards for this wind load will survive peak storm season gusts without panel failure or overturning.
What is required before you start digging fence post holes?
Washington 811 utility locate service is mandatory and free. In Downtown Pasco, hitting a buried gas, fiber, or power line is a major financial and safety liability. We manage the 811 ticket and coordinate with the Pasco permit office to ensure all zoning and engineering approvals are cleared before any equipment arrives.
What are the height and setback rules for a fence on my property?
Pasco zoning limits fences to 3 feet in front yards and 6 feet in rear/side yards, with a 0-foot setback onto your property line. For corner lots, especially near high-traffic corridors like US-395, 'sight triangle' regulations apply. No obstruction over 3 feet high is permitted within 20 feet of the intersection corner to maintain driver visibility.
