Top Fencing Companies in Pullman, WA, 99163 | Compare & Call
There are 238 fencing companies server in Pullman WA
A&Z Services has been serving Lakewood, WA, for over 15 years, treating every project as if it were our own home. We specialize in masonry and concrete work, fences and gates, and decks and railings—f...
K&C Home Remodel is a family-owned business in Graham, WA, operated by Kyle and Candice. With over 12 years of experience, they started by helping friends and family with home projects, eventually fli...
Perimeter Kings serves Edgewood, WA, specializing in general contracting with a focus on fences, gates, decks, and railing. The company addresses common local issues like broken gate hinges and fence ...
Aguiar Pavers
Aguiar Pavers, established in 2008, is a licensed and insured masonry and concrete contractor serving Maple Valley and the surrounding areas of Washington and Idaho. Specializing in interlocking pavin...
MC Home Improvements LLC, based in Lacey, WA, brings a straightforward approach to residential upgrades. We specialize in gutter services, roofing, and fences & gates, treating every home with the sam...
Autogate NW, based in Centralia, WA, brings a decade of specialized experience in automatic gate and access control system installation and repair. Previously heading the automation department at a ma...
Phil and Sons Roofing, located in Puyallup, WA, provides reliable roofing, siding, and fencing services to local homeowners. With years of experience serving neighborhoods like South Hill and near the...
D&D Construction NW
D&D Construction NW has been serving Auburn and the surrounding areas for over 30 years as a licensed general contractor specializing in home remodeling, decks, fences, kitchens, and bathrooms for bot...
Sound Crawl Services in Tacoma, WA, is a family-rooted general contracting company specializing in building additions, deck construction, repair, and replacement. Our founder grew up on construction s...
Based in Auburn, WA, Whatever Werks Welding brings 19 years of experience as a general contractor specializing in metal fabrication for decks, railings, fences, and gates. Fully licensed, bonded, and ...
Estimated Fencing Costs in Pullman, WA
Question Answers
How can a smart gate meet both modern convenience and safety codes for my pool?
A smart gate with an integrated IoT latch can meet IBC/IRC Appendix AG standards. The system must self-close and self-latch automatically. Modern systems log access and send alerts, which strengthens liability protection for Washington homeowners with pools.
Why do fence posts in Pullman's College Hill neighborhood fail without deep footings?
The 36-inch frost depth in Pullman causes frost heave. Posts set above this line lift and crack during freeze-thaw cycles. The IRC requires footings below the frost line for stability. Without this, posts in College Hill fail within two seasons.
What is my legal obligation before building a fence on my property line in Pullman?
Washington State law (RCW 16.60.020) is the 'good neighbor fence law.' In 2026, you must formally notify adjoining owners before replacing a shared boundary fence. Failure to provide notice can lead to shared-cost disputes. This applies even with Pullman's 0-foot setback rule.
How soon can a structural consultant assess my Pullman property?
We dispatch from the Washington State University campus area. The route via US-195 provides a 15-20 minute response time to most College Hill properties. We schedule same-day or next-day consultations to evaluate frost footing depth, wind load plans, and zoning compliance on-site.
What are the height and placement rules for my fence in Pullman?
Pullman zoning limits fences to 3 feet in front yards and 6 feet in rear yards. The 0-foot setback allows building on the property line. For corner lots, especially near US-195, maintain a clear 'sight triangle' at intersections. This is a critical visibility zone where lower fencing is often mandated.
Is a standard fence design strong enough for Pullman's wind loads?
No. Pullman's 105 MPH V-ult wind speed rating governs engineering. Standard 8-foot post spacing often fails. Design must follow ASCE 7-22 standards, using closer post spacing (6 feet or less), deeper concrete footings, and wind-rated brackets to survive peak storm season gusts.
How do Pullman's soil and pest conditions affect my fence material choice?
Pullman has low-to-moderate soil corrosivity and slight-to-moderate termite risk. Use pressure-treated wood rated for ground contact or corrosion-resistant metals. Always specify hot-dip galvanized or stainless steel fasteners. This prevents rust streaks and counters the soil's chemical action.
What is the critical first step before any digging for my fence project?
Call 811 (Washington 811) to mark all underground utilities. This is legally required. Hitting a gas or fiber line in College Hill creates major liability, repair costs, and service disruptions. A professional manages the Pullman permit office paperwork concurrently to avoid delays.
