Top Fencing Companies in Pullman, WA, 99163 | Compare & Call
There are 238 fencing companies server in Pullman WA
Evergreen Electric Gates And Fences has served Kent, WA, since 2008, providing fence and gate installation, repair, and finishing for residential and commercial properties. As a local fence company, w...
NW Fencing Construction, based in Bothell, WA, has been serving local residents since November 2022. As a licensed (NWFENFC776K), insured, and bonded general contractor, our team brings over a decade ...
Olympic Fencing Solutions has been serving Tacoma and the Greater Puget Sound region for over 15 years, providing reliable fence, gate, and deck services for both residential and commercial properties...
Continental Fence, based in Spanaway, WA, is a licensed and insured fencing contractor with five years of experience serving residential and commercial clients across the Seattle/Tacoma area. We speci...
Gate Technologies, based in Auburn, WA, has been a trusted provider of fence and gate services for nearly a decade. As a licensed, bonded, and insured general and specialty electrical contractor, they...
Ivan, manager of Tidy Beaver Fencing in Redmond, WA, leads a team dedicated to redefining fence and deck installation. Founded in 2024, our company prioritizes quality, customer experience, and speed....
J A P Fence & Decks is a trusted local contractor serving Renton, WA, and the surrounding areas. Specializing in decks and railing, fences and gates, and patio coverings, the company helps homeowners ...
Constellation Fences, based in Kent, WA, specializes in custom iron gates and iron fence installation for both residential and commercial properties. Our team focuses on high-quality fabrication and d...
AJB Landscaping & Fence serves homeowners in Olympia, WA, tackling common local issues like aging fence systems and chain link corrosion. Located near Capitol Lake and the downtown Farmer’s Market, th...
Rogue Fabricators
Rogue Fabricators Inc. is a custom metal fabrication company based in Poulsbo, WA. With over 15 years of experience, our industry-certified staff specializes in railings, structural, architectural, ar...
Estimated Fencing Costs in Pullman, WA
Question Answers
How can a smart gate meet both modern convenience and safety codes for my pool?
A smart gate with an integrated IoT latch can meet IBC/IRC Appendix AG standards. The system must self-close and self-latch automatically. Modern systems log access and send alerts, which strengthens liability protection for Washington homeowners with pools.
Why do fence posts in Pullman's College Hill neighborhood fail without deep footings?
The 36-inch frost depth in Pullman causes frost heave. Posts set above this line lift and crack during freeze-thaw cycles. The IRC requires footings below the frost line for stability. Without this, posts in College Hill fail within two seasons.
What is my legal obligation before building a fence on my property line in Pullman?
Washington State law (RCW 16.60.020) is the 'good neighbor fence law.' In 2026, you must formally notify adjoining owners before replacing a shared boundary fence. Failure to provide notice can lead to shared-cost disputes. This applies even with Pullman's 0-foot setback rule.
How soon can a structural consultant assess my Pullman property?
We dispatch from the Washington State University campus area. The route via US-195 provides a 15-20 minute response time to most College Hill properties. We schedule same-day or next-day consultations to evaluate frost footing depth, wind load plans, and zoning compliance on-site.
What are the height and placement rules for my fence in Pullman?
Pullman zoning limits fences to 3 feet in front yards and 6 feet in rear yards. The 0-foot setback allows building on the property line. For corner lots, especially near US-195, maintain a clear 'sight triangle' at intersections. This is a critical visibility zone where lower fencing is often mandated.
Is a standard fence design strong enough for Pullman's wind loads?
No. Pullman's 105 MPH V-ult wind speed rating governs engineering. Standard 8-foot post spacing often fails. Design must follow ASCE 7-22 standards, using closer post spacing (6 feet or less), deeper concrete footings, and wind-rated brackets to survive peak storm season gusts.
How do Pullman's soil and pest conditions affect my fence material choice?
Pullman has low-to-moderate soil corrosivity and slight-to-moderate termite risk. Use pressure-treated wood rated for ground contact or corrosion-resistant metals. Always specify hot-dip galvanized or stainless steel fasteners. This prevents rust streaks and counters the soil's chemical action.
What is the critical first step before any digging for my fence project?
Call 811 (Washington 811) to mark all underground utilities. This is legally required. Hitting a gas or fiber line in College Hill creates major liability, repair costs, and service disruptions. A professional manages the Pullman permit office paperwork concurrently to avoid delays.
